Download or read book HYPERSONIC GLIDE VEHICLE DESIGN CONSIDERATIONS written by and published by . This book was released on 1960 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comparison is made of the basic characteristics of the glide vehicle and the drag re-entry vehicle for orbital re-entry. Detail design considerations pertinent to the development of re-entry gliders are discussed.
Download or read book Steady Glide Dynamics and Guidance of Hypersonic Vehicle written by Wanchun Chen and published by Springer Nature. This book was released on 2020-11-07 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest researches on hypersonic steady glide dynamics and guidance, including the concept of steady glide reentry trajectory and the stability of its regular perturbation solutions, trajectory damping control technique for hypersonic glide reentry, singular perturbation guidance of hypersonic glide reentry, trajectory optimization based on steady glide, linear pseudospectral generalized nominal effort miss distance guidance, analytical entry guidance and trajectory-shaping guidance with final speed and load factor constraints. They can be used to solve many new difficult problems in entry guidance. And many practical engineering cases are provided for the readers for better understanding. Researchers and students in the fields of flight vehicle design or flight dynamics, guidance and control could use the book as valuable reference.
Download or read book Structural Design Considerations for Cryogenic Fueled Hypersonic Cruise Vehicles written by William H. Goesch and published by . This book was released on 1968 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Aerothermodynamic Design Problems of Hypersonic Flight Vehicles written by Ernst Heinrich Hirschel and published by Springer Science & Business Media. This book was released on 2009-11-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book selected aerothermodynamic design problems in hypersonic vehicles are treated. Where applicable, it emphasizes the fact that outer surfaces of hypersonic vehicles primarily are radiation-cooled, an interdisciplinary topic with many implications.
Download or read book Impact of Stability and Control on Vehicle Geometry and Performance written by Juan Camilo Buriticá Yate and published by . This book was released on 2022 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hypersonic vehicles have been in development for over 60 years, yet a controlconfigure-vehicle has yet to be designed to understand the possible improvements over statically stable configurations. This paper studies the effect of stability and control on aircraft geometry and performance by comparing traditional vehicles versus control configured vehicles (CCV) that operate at subsonic and supersonic speeds and extrapolates this analysis to predict these effects on hypersonic vehicles. Data related to geometry, aerodynamic performance, and stability from various vehicles were collected and used to find trends by comparing aircraft design parameters to stability criteria. The results showed that by decreasing the degree of inherent static stability, the vehicles tend to become smaller and lighter but require more control power and advanced control systems to compensate. Based on these results, CCV design considerations applied to hypersonic vehicles as well as a Mach 5.2 Hypersonic Glider design point are discussed.
Download or read book Technical Note written by and published by . This book was released on 1958 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonic Vehicles written by Giuseppe Pezzella and published by BoD – Books on Demand. This book was released on 2019-10-02 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the aviation field there is great interest in high-speed vehicle design. Hypersonic vehicles represent the next frontier of passenger transportation to and from space. However, several design issues must be addressed, including vehicle aerodynamics and aerothermodynamics, aeroshape design optimization, aerodynamic heating, boundary layer transition, and so on. This book contains valuable contributions focusing on hypervelocity aircraft design. Topics covered include hypersonic aircraft aerodynamic and aerothermodynamic design, especially aeroshape design optimization, computational fluid dynamics, and scramjet propulsion. The book also discusses high-speed flow issues and the challenges to achieving the dream of affordable hypersonic travel. It is hoped that the information contained herein will allow for the development of safe and efficient hypersonic vehicles.
Download or read book Technical Note National Advisory Committee for Aeronautics written by United States. National Advisory Committee for Aeronautics and published by . This book was released on 1958 with total page 1216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonic Vehicles written by Giuseppe Pezzella and published by BoD – Books on Demand. This book was released on 2022-05-04 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some sixty years after the experimental flights of the North American X-15 hypersonic rocket-powered aircraft, sustained hypervelocity travel is still the next frontier in high-speed transportation. Today, there is much excitement and interest regarding hypersonic vehicles. In fact, many aerospace agencies, large industries, and several start-ups are involved in design activities and experimental campaigns both in wind tunnels and in-flight with full-scale experimental flying test beds and prototypes to make hypersonic travel almost as easy and convenient as airliner travel. Achieving this goal will radically revolutionize the future of civil transportation. This book contains valuable contributions that focus on various design issues related to hypersonic aircraft.
Download or read book Hypersonic Aerothermodynamics written by John J. Bertin and published by AIAA. This book was released on 1994 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern treatment of hypersonic aerothermodynamics for students, engineers, scientists, and program managers involved in the study and application of hypersonic flight. It assumes an understanding of the basic principles of fluid mechanics, thermodynamics, compressible flow, and heat transfer. Ten chapters address: general characterization of hypersonic flows; basic equations of motion; defining the aerothermodynamic environment; experimental measurements of hypersonic flows; stagnation-region flowfield; the pressure distribution; the boundary layer and convective heat transfer; aerodynamic forces and moments; viscous interactions; and aerothermodynamics and design considerations. Includes sample exercises and homework problems. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Re Entry and Vehicle Design written by Donald P. Legalley and published by Academic Press. This book was released on 2014-05-12 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ballistic Missile and Space Technology, Volume IV: Re-Entry and Vehicle Design focuses on the advancements of processes, methodologies, and technologies involved in re-entry and vehicle design, including hypersonics, material structures, propulsion, and communications. The selection first offers information on the pyrolysis of plastics in a high vacuum arc image furnace and aerothermodynamic feasibility of graphite for hypersonic glide vehicles. Discussions focus on aerothermochemical behavior of graphite, transient heat conduction, equilibrium glide trajectory, and apparatus and pyrolysis procedure. The text then takes a look at an engineering analysis of the weights of ablating systems for manned reentry vehicles and trajectories of lifting bodies entering planetary atmospheres at shallow angles. The manuscript ponders on propulsive control of atmospheric entry lifting trajectories, re-entry engineering mechanics, and rocket casing behavior predicted by laboratory tests. Topics include description of testing program, full-scale casing results, camera design, theoretical correlation, approximate thrust vector optimization, and propellant weight estimation. The selection is a dependable reference for astronauts and researchers interested in re-entry and vehicle design.
Download or read book Design Considerations for Thermally Insulating Structural Sandwich Panels for Hypersonic Vehicles written by Max L. Blosser and published by . This book was released on 2016 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Comparative Analysis of the Performance of Long range Hypervelocity Vehicles written by Alfred J. Eggers and published by . This book was released on 1957 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ballistic vehicle is found to be the least efficient of the several types studied in the sense that it generally requires the highest velocity at the end of powered flight in order to attain a given range. This disadvantage may be offset, however, by reducing convective heat transfer to the re-entry body through the artifice of increasing pressure drag in relation to friction drag - that is, by using a blunt body. Thus the kinetic energy required by the vehicle at the end of powered flight may be reduced by minimizing the mass of coolant material involved.
Download or read book Approximations for the Thermodynamic and Transport Properties of High temperature Air written by C. Frederick Hansen and published by . This book was released on 1958 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thermodynamic and transport prorerties of high-temperature air are found in closed form starting from approximate partition functions for the major components in air and neglecting all minor components. The compressibility, energy, entropy, the specific heats, the speed of sound, the coefficients of viscosity and of thermal conductivity, and the Prandtl numbers for air are tabulated from 500 degrees to 15,000 degrees K over a range of pressure from 0.0001 to 100 atmospheres. The enthalpy of air and the mol fractions of the major components of air can easily be found from the tabulated values for compressibility and energy. It is predicted that the Prandtl number for fully ionized air will become small compared to unity, the order of 0.01, and this implies that boundary layers in such flow will be very transparent to heat flux.
Download or read book Aerothermoelastic Considerations for a Control Surface on an Air breathing Hypersonic Vehicle written by Benjamin R. Szpak and published by . This book was released on 2009 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Air-breathing hypersonic vehicles have risen to the forefront of the aerospace research community in reaction to the requirements of NASA and the US Air Force. NASA has interest in developing a next generation Reusable Launch Vehicle and the US Air Force is interested in an unmanned hypersonic vehicle. Recent research has focused on developing comprehensive models in order to successfully design a vehicle capable of operating in the severe hypersonic environment. Due to the layout of this class of vehicle, where the propulsion system is fully integrated into the lifting body fuselage, a tight coupling exists between the airframe, propulsion system, control system, and aerodynamics. This characteristic necessitates a multi-disciplinary approach to modeling for control design. To achieve this, a simplified model of each subsystem is needed to efficiently perform a multi-disciplinary analysis. Two important and challenging areas for multi-disciplinary modeling are the incorporation of complex aerodynamic and aerothermoelastic phenomena. The focus of this research is on the development of a model for the control surface. Specifically an aerothermoelastic model, based on a plate representation, has been developed for the vehicle control surface. This model was adapted from a previous model, developed at the Air Force Research Laboratory, to incorporate important characteristics such as taper and sweep of the control surface. Thus, the model more realistically represents the geometry of a control surface for a hypersonic vehicle. The structural model developed was then verified using finite element analysis to compare the free vibration frequencies and modeshapes. Since the structural dynamic characteristics of a solid plate are not compatible to those of a shell structured wing, the structural properties were modified to match the first two frequencies of a representative wing, namely the F-104 Lockheed Starfighter wing. As the temperature of a plate increases, the first two frequencies begin to coalesce. This coalescence of frequencies leads to a phenomena known as flutter. As the temperature of the plate was increased the aerothermoelastic response was computed at a constant Mach number until the onset of flutter. By implementing a flexible control surface model, the response of the wing to control inputs and fuselage deformations could also be investigated. Both of these effects are modeled as base motion of the cantilevered plate. Second order piston theory, a commonly used model for hypersonic aerodynamics, was used to calculate the aerodynamic forces on the plate. Results presented provide insight into the importance of aerothermoelastic effects for control oriented modeling, as well as the effect of plate sweep and taper compared to a simple square plate representation.
Download or read book Steady Glide Dynamics and Guidance of Hypersonic Vehicle written by Wanchun Chen and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest researches on hypersonic steady glide dynamics and guidance, including the concept of steady glide reentry trajectory and the stability of its regular perturbation solutions, trajectory damping control technique for hypersonic glide reentry, singular perturbation guidance of hypersonic glide reentry, trajectory optimization based on steady glide, linear pseudospectral generalized nominal effort miss distance guidance, analytical entry guidance and trajectory-shaping guidance with final speed and load factor constraints. They can be used to solve many new difficult problems in entry guidance. And many practical engineering cases are provided for the readers for better understanding. Researchers and students in the fields of flight vehicle design or flight dynamics, guidance and control could use the book as valuable reference.
Download or read book The Subsonic Static Aerodynamic Characteristics of an Airplane Model Having a Triangular Wing of Aspect Ratio 3 written by Howard F. Savage and published by . This book was released on 1957 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation has been conducted to determine the effects of vertical-tail location and size on the subsonic aerodynamic characteristics of a model having a triangular wing. The wing had an aspect ratio of 3, an NACA 0003.5-63 section in the streamwise direction, and plain, trailing-edge ailerons. The wing was attached to the fuselage in either a mid or high position and an unswept horizontal tail was located on the fuselage center line. Two vertical tails were tested which had areas of 26.7 or 20.3 percent of the wing area. Each vertical tail was equipped with a rudder and had a geometric aspect ratio of 1.5, a taper ratio of 0.16, and 54 degrees of sweepback of the leading edge. Each vertical tail was tested at two different tail lengths. The wind-tunnel tests were conducted at a Reynolds number of 2.5 milMon at Mach numbers from 0.25 to 0.95.
