Download or read book Hydromechanical and Thermohydromechanical Behaviour of Deep Argillaceous Rock Theory and Experiments written by N. Hoteit and published by CRC Press. This book was released on 2002-01-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers address state-of-the-art knowledge of thermo-hydro-mechanical behaviours of deep argillaceous rocks. They introduce achievements in laboratory test methods for determining the coupling parameters of deep argillaceous rocks, amongst other things.

Download or read book Geomechanics in CO2 Storage Facilities written by Gilles Pijaudier-Cabot and published by John Wiley & Sons. This book was released on 2013-01-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: CO2 capture and geological storage is seen as the most effective technology to rapidly reduce the emission of greenhouse gases into the atmosphere. Up until now and before proceeding to an industrial development of this technology, laboratory research has been conducted for several years and pilot projects have been launched. So far, these studies have mainly focused on transport and geochemical issues and few studies have been dedicated to the geomechanical issues in CO2 storage facilities. The purpose of this book is to give an overview of the multiphysics processes occurring in CO2 storage facilities, with particular attention given to coupled geomechanical problems. The book is divided into three parts. The first part is dedicated to transport processes and focuses on the efficiency of the storage complex and the evaluation of possible leakage paths. The second part deals with issues related to reservoir injectivity and the presence of fractures and occurrence of damage. The final part of the book concerns the serviceability and ageing of the geomaterials whose poromechanical properties may be altered by contact with the injected reactive fluid.

Download or read book Thermo Poroelasticity and Geomechanics written by A. P. S. Selvadurai and published by Cambridge University Press. This book was released on 2016-10-27 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Investigations of multi-physical processes in geomaterials have gained increasing attention due to the ongoing interest in solving complex geoenvironmental problems. This book provides a comprehensive exposition of the classical theory of thermo-poroelasticity, complemented by complete examples to problems in thermo-poromechanics that are used to validate computational results from multi-physics codes used in practice. The methodologies offer an insight into real-life problems related to modern environmental geosciences, including nuclear waste management, geologic sequestration of greenhouse gases to mitigate climate change, and the impact of energy resources recovery on groundwater resources. A strong focus is placed on analytical approaches to benchmark the accuracy of the computational approaches that are ultimately used in real-life problems. The extensive coverage of both theory and applications in thermo-poroelasticity and geomechanics provides a unified presentation of the topics, making this an accessible and invaluable resource for researchers, students or practitioners in the field.

Download or read book Deep Geological Disposal of Radioactive Waste written by W. R. Alexander and published by Elsevier. This book was released on 2011-07-29 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deep Geological Disposal of Radioactive Waste presents a critical review of designing, siting, constructing and demonstrating the safety and environmental impact of deep repositories for radioactive wastes. It is structured to provide a broad perspective of this multi-faceted, multi-disciplinary topic: providing enough detail for a non-specialist to understand the fundamental principles involved and with extensive references to sources of more detailed information. Emphasis is very much on “deep geological disposal – at least some tens of metres below land surface and, in many cases, many hundred of metres deep. Additionally, only radioactive wastes are considered directly – even though such wastes often contain also significant chemotoxic or otherwise hazardous components. Many of the principles involved are generally applicable to other repository options (e.g. near-surface or on-surface disposal) and, indeed, to other types of hazardous waste. Presents a current critical review in designing, siting, constructing and demonsrating the safety and environmental impact of deep repositories for radwaste Addresses the fundamental principles of radioactive waste with up-to-date examples and real-world case studies Written for a multi-disciplinary audience, with an appropriate level of detail to allow a non-specialist to understand

Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Geo systems written by Ove Stephansson and published by Elsevier. This book was released on 2004-11-03 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.

Download or read book Numerical Models in Geomechanics written by G.N. Pande and published by CRC Press. This book was released on 2004-08-15 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the current research and advances made in the application of numerical methods in geotechnical engineering, this volume details proceedings of the Ninth International Symposium on 'Numerical Models in Geomechanics - NUMOG IX' held in Ottawa, Canada, 25-27 August 2004. Highlighting a number of new developments in the area, papers concentrate upon the following four main areas: * constitutive relations for geomaterials * numerical algorithms: formulation and performance * modelling of transient, coupled and dynamic problems * application of numerical techniques to practical problems. Representing the most advanced, modern findings in the field, Numerical Models in Geomechanics is a comprehensive and impeccably-researched text, ideal for students and researchers as well as practising engineers.

Download or read book Contributions of Rock Mechanics to the New Century written by Yuzo Ohnishi and published by . This book was released on 2004 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Poromechanics II written by J.L. Auriault and published by CRC Press. This book was released on 2020-12-18 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings deal with the fundamentals and applications of poromechanics to geomechanics, material sciences, geophysics, acoustics and biomechanics. They discuss the state of the art in such topics as constitutive modelling and upscaling methods.

Download or read book A Multi disciplinary Approach to Understanding the Geological Context of the Eastern Jurassic Border of the Paris Basin Meuse Heute Marne written by Patrick Lebon and published by . This book was released on 2007 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 2003 with total page 1926 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermo Hydro Mechanical Coupling in Fractured Rock written by Hans-Joachim Kümpel and published by Birkhäuser. This book was released on 2012-12-06 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: (4). The next three papers extend these views by taking a closer look on parameters that govern hydraulic diffusivity in sandstones and other types of rocks. Specific targets addressed are the influence of differential stress on permeability (5), imaging of the fracture geometry (6), and pressure induced variations in the pore geometry (7). Contributions no. 8 to 10 cover investigations of permeability-porosity relationships during rock evolution (8), of the formation, propagation, and roughness of fractures in a plexi-glass block (9), and pressure oscillation effects of two-phase flow under controlled conditions (10). The subsequent four articles focus on diverse modeling approaches. Issues considered are how the geometry and the mechanical behavior of fractures can be characterized by mathematical expressions (11), how the evolution of permeability in a microcracking rock can be expressed by an analytical model (12), deviations from the cubic law for a fracture of varying aperture (13), and the numerical simulation of scale effects in flow through fractures (14). Three further papers refer to in situ observations, being related to topics as the assessment of in situ permeability from the spatio temporal distribution of an aftershock sequence (15), to the scale dependence of hydraulic pathways in crystalline rock (16), and to the significance of pore pressure - stress coupling in deep tunnels and galleries (17).

Download or read book Hydro mechanical Coupled Creep Behaviour of Boom Clay written by Weizhong Chen and published by CRC Press. This book was released on 2016-01-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creep behaviour, especially for underground radioactive waste disposal facilities, whose storage period far exceed the service time of most of the civil engineering underground facilities, is very significant. Boom Clay, an argillaceous rock chosen as a reasonable geological barrier in Belgium is first systematically studied in this book. A series of research tools such as laboratory experiments (4 years), field measurements (20 years), theoretical studies, back analysis and numerical simulations are used to study the mechanical behavior of this rock. Firstly, laboratory studies such as oedometer tests, HM triaxial tests, HM triaxial creep tests and SEM tests, etc. intuitively show the nonlinear behaviour of the argillaceous rock and it provides a basis for the theoretical studies. Secondly, considering the anisotropic mechanical properties and nonlinear creep potential of Boom Clay, a relatively complete theoretical system has been established. Thirdly, based on the field measurements in the last few decades, using back analysis method, the theoretical studies are verified. Finally, based on the study above, long term stability analysis of the underground disposal facilities is implemented and the risks facing future generations in the event of failure in the disposal system are also quantified through numerical simulation.

Download or read book Coupled Thermo Hydro Mechanical Processes in Fractured Rock Masses written by Fengshou Zhang and published by Springer Nature. This book was released on 2023-09-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of thermo-hydro-mechanical coupled processes in fractured rock masses has close relevance to energy-related deep earth engineering activities, such as enhanced geothermal systems, geological disposal of radioactive waste, sequestration of CO2, long-term disposal of waste water and recovery of hydrocarbons from unconventional reservoirs. Despite great efforts by engineers and researchers, comprehensive understanding of the thermo-hydro-mechanical coupled processes in fractured rock mass remains a great challenge. The discrete element method (DEM), originally developed by Dr. Peter Cundall, has become widely used for the modeling of a rock mass, including its deformation, damage, fracturing and stability. DEM modeling of the coupled thermo-hydro-mechanical processes in fractured rock masses can provide some unique insights, to say the least, for better understanding of those complex issues. The authors of this book have participated in various projects involving DEM modeling of coupled thermo-hydro-mechanical processes during treatment of a rock mass by fluid injection and/or extraction and have provided consulting services to some of the largest oil-and-gas companies in the world. The breadth and depth of our engineering expertise are reflected by its successful applications in the major unconventional plays in the world, including Permian, Marcellus, Bakken, Eagle Ford, Horn River, Chicontepec, Sichuan, Ordos and many more. The unique combination of the state-of-the-art numerical modeling techniques with state-of-the-practice engineering applications makes the presented material relevant and valuable for engineering practice. We believe that it is beneficial to share the advances on this subject and promote some further development.

Download or read book Coupled Thermo Hydro Mechanical Processes of Fractured Media written by O. Stephanson and published by Elsevier. This book was released on 1997-02-10 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work brings together the results, information and data that emerged from an international cooperative project, DECOVALEX, 1992-1995. This project was concerned with the mathematical and experimental studies of coupled thermo(T) -hydro(H) -mechanical(M) processes in fractured media related to radioactive waste disposal. The book presents, for the first time, the systematic formulation of mathematical models of the coupled T-H-M processes of fractured media, their validation against theoretical bench-mark tests, and experimental studies at both laboratory and field scales. It also presents, for the first time, a comprehensive analysis of continuum, and discrete approaches to the study of the problems of (as well as a complete description of), the computer codes applied to the studies. The first two chapters provide a conceptual introduction to the coupled T-H-M processes in fractured media and the DECOVALEX project. The next seven chapters give a state-of-the-art survey of the constitutive models of rock fractures and formulation of coupled T-H-M phenomena with continuum and discontinuum approaches, and associated numerical methods. A study on the three generic Bench-Mark Test problems and six Test Case problems of laboratory and field experiments are reported in chapters 10 to 18. Chapter 19 contains lessons learned during the project. The research contained in this book will be valuable for designers, practising engineers and national waste management officials who are concerned with planning, design and performance, and safety assessments of radioactive waste repositories. Researchers and postgraduate students working in this field will also find the book of particular relevance.

Download or read book Multilevel Modeling of Secure Systems in QoP ML written by Bogdan Księżopolski and published by CRC Press. This book was released on 2015-07-02 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing the Quality of Protection Modeling Language (QoP-ML), this book provides for the abstraction of security systems while maintaining emphasis on the details of quality protection . It delineates the steps used in cryptographic protocol and introduces a multilevel protocol analysis that expands current understanding. Every operation defined by QoP-ML is described within parameters of security metrics, therefore evaluating the impact of the operation on the entire system's security.

Download or read book Thermo Hydro Mechanical Chemical Processes in Fractured Porous Media Modelling and Benchmarking written by Olaf Kolditz and published by Springer. This book was released on 2014-11-26 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book provides guidance to understanding complicated coupled processes based on the experimental data available and implementation of developed algorithms in numerical codes. Results of selected test cases in the fields of closed-form solutions (e.g., deformation processes), single processes (such as groundwater flow) as well as coupled processes are presented. It is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation with the community.

Download or read book G otechnique written by and published by . This book was released on 2009 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: