Download or read book Hydrogen via Light Naphtha Reforming Cost Analysis Hydrogen E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Hydrogen production from light naphtha. The process examined is a typical steam reforming process. This report was developed based essentially on the following reference(s): "Hydrogen", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: H2, Water-gas Shifting, Reformer
Download or read book Reformate Production from Naphtha Cost Analysis Reformate E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Aromatic Reformate production from naphtha using a semi-regeneration process. The process examined is similar to UOP RZ Platforming process. In this process, hydrogen is generated as by-product. This report was developed based essentially on the following reference(s): "Aromatics", Encyclopedia of Hydrocarbons, Volume II, 2006 Keywords: Fixed Bed, Reformer, Benzene, Toluene, Aromatics, Reforming Process
Download or read book Catalytic naphtha reforming science and technology written by George J. Parera Antos (Jose M.Aitani, Abdullah M) and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management of Energy environment Systems written by Wesley K. Foell and published by John Wiley & Sons. This book was released on 1979 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comporison of the geman democratic republic. A methodology for constructing and modeling energy/environment futures. Alternative energy/environment futures for rhone-alpes prologue: The wisconsin scenarios in retrospect. Alternative energy/environment futures for wisconsin. Cross-regional comparison of energy/environment futures.
Download or read book Perspectives on Deep Sea Mining written by Rahul Sharma and published by Springer Nature. This book was released on 2022-01-13 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a sequel to ’Deep-Sea Mining: Resource Potential, Technical and Environmental Considerations’ (2017) and ‘Environmental Issues of Deep-Sea Mining: Impacts, Consequences and Policy Perspectives’ (2019), and aims to provide a comprehensive volume on different perspectives of deep-sea mining from specialists around the world. The work is timely, as deep-sea minerals continue to enthuse researchers involved in activities such as ascertaining their potential as alternative sources for critical metals for green energy and other industrial applications, as well as technology development for their sustainable exploration and exploitation, while addressing environmental concerns. With a steady increase in the number of contractors having exclusive rights over large tracts of seafloor in the ‘Area’, i.e. area beyond national jurisdictions, the International Seabed Authority, mandated with the responsibility of regulating such activities, is in the process of developing a code for exploitation of deep-sea minerals. These, coupled with growing interest among private entrepreneurs, investment companies and policy makers, underscore the need for updated information to be made available in one place on the subject of deep-sea mining. The book evaluates the potential and sustainability of mining for deep-sea minerals compared to other land-based deposits, the technologies needed for mining and processing of ores, the approach towards environmental monitoring and management, as well as the regulatory frameworks and legal challenges to manage deep-sea mining activities. The book is expected to serve as an important reference for all stakeholders including researchers, contractors, mining companies, regulators and NGOs involved in deep-sea mining.
Download or read book Hydrogen Power Theoretical and Engineering Solutions written by T.O. Saetre and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains selected contributions to the second Hydrogen Power, Theoretical and Engineering Solutions, International Symposium (HYPOTHESIS II), held in Grimstad, Norway, from 18 to 22 August 1997. The scientific programme included 10 oral sessions and a poster session. Widely based national committees, supported by an International Scientific Advisory Board and the International Coordinators, made every effort to design and bring together a programme of great excellence. The more than one hundred papers submitted represent the efforts of research groups from all over the World. The international character of HYPOTHESIS II has been augmented by contributions coming from seven countries outside Europe. The contributions reflect the progress that has been achieved in hydrogen technology aimed primarily at hydrogen as the ultimate energy vector. This research have already yielded mature technologies for mass production in many areas. These and future results will be of increased interest and importance as global and local environmental issues move higher up the political agenda. In order to facilitate new contacts between scientists and strengthen existing ones, the symposium incorporated an extensive social program managed by the Conference Administrator, Ms. Ann Y stad.
Download or read book CO2 Sequestration and Valorization written by Claudia R. V. Morgado and published by BoD – Books on Demand. This book was released on 2014-03-12 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reconciliation of economic development, social justice and reduction of greenhouse gas emissions is one of the biggest political challenges of the moment. Strategies for mitigating CO2 emissions on a large scale using sequestration, storage and carbon technologies are priorities on the agendas of research centres and governments. Research on carbon sequestration is the path to solving major sustainability problems of this century a complex issue that requires a scientific approach and multidisciplinary and interdisciplinary technology, plus a collaborative policy among nations. Thus, this challenge makes this book an important source of information for researchers, policymakers and anyone with an inquiring mind on this subject.
Download or read book Algae Based Polymers Blends and Composites written by Khalid Mahmood Zia and published by Elsevier. This book was released on 2017-06-19 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algae Based Polymers, Blends, and Composites: Chemistry, Biotechnology and Material Sciences offers considerable detail on the origin of algae, extraction of useful metabolites and major compounds from algal bio-mass, and the production and future prospects of sustainable polymers derived from algae, blends of algae, and algae based composites. Characterization methods and processing techniques for algae-based polymers and composites are discussed in detail, enabling researchers to apply the latest techniques to their own work. The conversion of bio-mass into high value chemicals, energy, and materials has ample financial and ecological importance, particularly in the era of declining petroleum reserves and global warming. Algae are an important source of biomass since they flourish rapidly and can be cultivated almost everywhere. At present the majority of naturally produced algal biomass is an unused resource and normally is left to decompose. Similarly, the use of this enormous underexploited biomass is mainly limited to food consumption and as bio-fertilizer. However, there is an opportunity here for materials scientists to explore its potential as a feedstock for the production of sustainable materials. - Provides detailed information on the extraction of useful compounds from algal biomass - Highlights the development of a range of polymers, blends, and composites - Includes coverage of characterization and processing techniques, enabling research scientists and engineers to apply the information to their own research and development - Discusses potential applications and future prospects of algae-based biopolymers, giving the latest insight into the future of these sustainable materials
Download or read book Chemical Reaction Engineering written by Martin Schmal and published by CRC Press. This book was released on 2014-04-04 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reaction Engineering: Essentials, Exercises and Examples presents the essentials of kinetics, reactor design and chemical reaction engineering for undergraduate students. Concise and didactic in its approach, it features over 70 resolved examples and many exercises.The work is organized in two parts: in the first part kinetics is presented
Download or read book Catalytic Ammonia Synthesis written by J.R. Jennings and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phenomenon of catalysis is found in many homogeneous and heterogeneous systems undergoing chemical change, where it effects the rates of approach to the equilibrium state in processes as diverse as those found in the stars, the earth's mantle, living organisms, and the various chemistries utilized by industry. The economies and the living standards of both developed and developing countries depend to varying degrees upon the efficacy of their chemical industries. Con sequently, this century has seen a wide exploration and expansion of catalytic chemistry together with an intensive investigation of specific, essential processes like those contributing to life-supporting agricultures. Prime among the latter must surely be the "fixation" of atmospheric nitrogen by catalytic hydrogenation to anhydrous ammonia, still the preferred synthetic precursor of the nitrogenous components of fertilizers. In each decade contemporary concepts and techniques have been used to further the understanding, as yet incomplete, of the catalyst, the adsorbates, the surface reactions, and the technology of large-scale operation. The contributors to the present volume review the state of the art, the science, and the technology; they reveal existing lacunae, and suggest ways forward. Around the turn of the century, Sabatier's school was extending the descriptive catalytic chemistry of hydrogenation by metals to include almost all types of multiple bond. The triple bond of dinitrogen, which continued to be more resistant than the somewhat similar bonds in carbon monoxide and ethyne, defied their efforts.
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
Download or read book Basic Principles and Calculations in Chemical Engineering written by David Mautner Himmelblau and published by FT Press. This book was released on 2012 with total page 975 pages. Available in PDF, EPUB and Kindle. Book excerpt: Best-selling introductory chemical engineering book - now updated with far more coverage of biotech, nanotech, and green engineering Thoroughly covers material balances, gases, liquids, and energy balances. Contains new biotech and bioengineering problems throughout.
Download or read book Clusters and Colloids written by Günter Schmid and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the rapidly developing field of cluster science. In an interdisciplinary approach, basic concepts as well as recent developments in research and practical applications are authoritatively discussed by leading authors. Topics covered include 'naked' metal clusters, clusters stabilized by ligands, clusters in solids, and colloids. The reader will find answers to questions like: * How many metal atoms must a particle have to exhibit metallic properties? * How can the large specific surface of clusters and colloids be employed in catalysts? * How can metal clusters be introduced into solid hosts? * Which effects are responsible for the transition from isolated to condensed clusters? The editor has succeeded in bringing the contributions of various authors together into a homogeneous, readable book, which will be useful for the academic and industrial reader alike.
Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications
Download or read book Piping Materials Guide written by Peter Smith and published by Elsevier. This book was released on 2005-01-20 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book of its kind on the market, this book is the companion to our Valve Selection Handbook, by the same author. Together, these two books form the most comprehensive work on piping and valves ever written for the process industries. This book covers the entire piping process, including the selection of piping materials according to the job, the application of the materials and fitting, trouble-shooting techniques for corrosion control, inspections for OSHA regulations, and even the warehousing, distributing, and ordering of materials. There are books on materials, fitting, OSHA regulations, and so on, but this is the only "one stop shopping" source for the piping engineer on piping materials.- Provides a "one stop shopping" source for the piping engineer on piping materials- Covers the entire piping process. - Designed as an easy-to-access guide
Download or read book Concepts In Syngas Manufacture written by Jens Rostrup-nielsen and published by World Scientific. This book was released on 2011-07-21 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general overview of syngas technologies as well as an in-depth analysis of the steam reforming process. Syngas is a mixture of hydrogen and carbon oxides which can be made from hydrocarbons, coal and biomass. It is an important intermediate in the chemical industry for manufacture of ammonia, methanol and other petrochemicals as well as hydrogen for refineries and fuel cells. Syngas is playing a growing role in the energy sector, because it can be converted into a number of important energy carriers and fuels. Syngas catalysis creates new options and flexibility in the complex energy network. The steam reforming process is the main technology today for manufacture of syngas. It is a complex intern-mingling of catalysis and heat transfer with restrictions caused by secondary phenomena such as carbon formation. Many of the principles are applicable for other gasification technologies of growing importance. Concepts of Syngas Preparation aims to provide a comprehensive introduction to this complex field of growing importance and gives a detailed analysis of the catalyst and process problems. This book also serves as an important link between science and industry by illustrating how the basic principles can be applied to solve design issues and operational problems./a
Download or read book Cotton Fiber Chemistry and Technology written by Phillip J. Wakelyn and published by CRC Press. This book was released on 2006-12-15 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annual cotton production exceeds 25 million metric tons and accounts for more than 40 percent of the textile fiber consumed worldwide. A key textile fiber for over 5000 years, this complex carbohydrate is also one of the leading crops to benefit from genetic engineering. Cotton Fiber Chemistry and Technology offers a modern examination of co
