Download or read book Hydrogen metal Systems Handbook written by N. A. Galaktionowa and published by . This book was released on 1980 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen Metal Systems I written by Frederick A. Lewis and published by Trans Tech Publications Ltd. This book was released on 1996-01-01 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook/Databook contains hundreds of completely updated figures and tables. The authors are among the most prominent in the field - and each is a specialist in the subject matter of his peer reviewed contribution.
Download or read book The Metal Hydrogen System written by Yuh Fukai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: I think it is expedient here to clearly specify the readership for whom this book is intended. Some readers might infer from the title that this is a data book convenient for occasional reference purposes. Most of the data on the bulk properties and a comprehensive list of publications are indeed compiled here, will be found useful as they are. The primary purpose of the book is, however, and rather to provide a coherent and consistent description of the basic bulk properties of the metal-hydrogen system, ranging from macroscopic properties such as solubilities and phase diagrams to microscopic properties such as atomistic states and diffusion. The emphasis has been placed on the physics of how these properties actually come about. This structure of the book is considered to be useful, and even necessary, not only for physicists but also for researchers interested in the materials-science aspects of the system. Who could have anticipated that the solubility of hydrogen in iron reaches a level as high as [H]/[Fe] ~ 1 under a hydrogen pressure of 10 GPa; who could have anticip ated that the diffusivity of hydrogen in metals increases at low temperatures; who could unravel the mechanism of "cold" fusion (if this indeed exists), without a basic understanding of the metal-hydrogen system? Obviously, these prob lems are not only of academic interest but also have profound technical implications.
Download or read book Hydrogen in Metal Systems II written by Frederick A. Lewis and published by Trans Tech Publications Ltd. This book was released on 2000-08-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the behaviour of hydrogen in metals is one of the most pressing research tasks in the physical sciences. The embrittling effect of hydrogen in mild steel was recognised from the very beginnings of the Industrial Revolution, and its effects still plague modern alloys during either fabrication or use. At the same time, the tendency of certain alloys to form stable hydrides in a reversible manner holds out the promise of the safe storage of hydrogen in vehicles and therefore the prospect of non-polluting transport and a true 'hydrogen economy'. Researchers in this field will therefore welcome the publication of this 2-volume set, "Hydrogen Metal Systems I & II", which presents comprehensive information and critical data concerning ionic and metallic hydrides; all conveniently based upon a periodic-table layout.
Download or read book Hydrogen metal Systems Databook written by N. A. Galaktionowa and published by . This book was released on 1980 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen in Metals I written by G. Alefeld and published by Springer. This book was released on 1978-08-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Hydrogen Systems written by T. Nejat Veziroglu and published by Elsevier. This book was released on 2016-01-22 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Hydrogen Systems covers the proceedings of the Miami International Symposium on Metal-Hydrogen Systems. The book presents studies that discuss the possibility of exploiting hydrogen as an alternative energy source through metal-hydrogen systems. The first part of the text covers the general concerns with the system, such as getting and utilizing metal hydrides and developing hydrogen permeable metal membranes for the Li/LiH-process. The subsequent articles cover a much more specialized and specific topics, such as diffusion of hydrogen in metals; interaction of hydrogen with structure; hydride properties, formation, and utilization; and hydrogen storage. The book will be of use to scientists, engineers, and technicians who are involved in the research, development, and implementation of alternative energy technology.
Download or read book Handbook of Hydrogen Energy written by S.A. Sherif and published by CRC Press. This book was released on 2014-07-29 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: Can hydrogen and electricity supply all of the world’s energy needs? Handbook of Hydrogen Energy thoroughly explores the notion of a hydrogen economy and addresses this question. The handbook considers hydrogen and electricity as a permanent energy system and provides factual information based on science. The text focuses on a large cross section of applications such as fuel cells and catalytic combustion of hydrogen. The book also includes information on inversion curves, physical and thermodynamic tables, and properties of storage materials, data on specific heats, and compressibility and temperature–entropy charts and more. Analyzes the principles of hydrogen energy production, storage, and utilization Examines electrolysis, thermolysis, photolysis, thermochemical cycles, and production from biomass and other hydrogen production methods Covers all modes of hydrogen storage: gaseous, liquid, slush, and metal hydride storage Handbook of Hydrogen Energy serves as a resource for graduate students, as well as a reference for energy and environmental engineers and scientists.
Download or read book Index Directory of Current Research on Hydrogen metal Systems written by Ordentlich and published by . This book was released on 1980 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gaseous Hydrogen Embrittlement of Materials in Energy Technologies written by Richard P Gangloff and published by Elsevier. This book was released on 2012-01-19 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many modern energy systems are reliant on the production, transportation, storage, and use of gaseous hydrogen. The safety, durability, performance and economic operation of these systems is challenged by operating-cycle dependent degradation by hydrogen of otherwise high performance materials. This important two-volume work provides a comprehensive and authoritative overview of the latest research into managing hydrogen embrittlement in energy technologies. Volume 2 is divided into three parts, part one looks at the mechanisms of hydrogen interactions with metals including chapters on the adsorption and trap-sensitive diffusion of hydrogen and its impact on deformation and fracture processes. Part two investigates modern methods of modelling hydrogen damage so as to predict material-cracking properties. The book ends with suggested future directions in science and engineering to manage the hydrogen embrittlement of high-performance metals in energy systems. With its distinguished editors and international team of expert contributors, Volume 2 of Gaseous hydrogen embrittlement of materials in energy technologies is an invaluable reference tool for engineers, designers, materials scientists, and solid mechanicians working with safety-critical components fabricated from high performance materials required to operate in severe environments based on hydrogen. Impacted technologies include aerospace, petrochemical refining, gas transmission, power generation and transportation. Summarises the wealth of recent research on understanding and dealing with the safety, durability, performance and economic operation of using gaseous hydrogen at high pressure Chapters review mechanisms of hydrogen embrittlement including absorption, diffusion and trapping of hydrogen in metals Analyses ways of modelling hydrogen-induced damage and assessing service life
Download or read book Atomic Interactions and Phase Transitions in Hydrogen Metal Systems written by Arthur I. Shirley and published by . This book was released on 1985 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen in Steel written by Michael Smialowski and published by Elsevier. This book was released on 2014-05-09 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen in Steel: Effect of Hydrogen on Iron and Steel During Production, Fabrication, and Use focuses on the effect of hydrogen on iron and steel during production, fabrication, and use. Topics covered range from the solubility of hydrogen in iron and ferrous alloys to the diffusion and permeation of hydrogen through iron and steel. Electrochemical problems related to the ability of iron to absorb hydrogen from aqueous solutions are also considered. Comprised of 19 chapters, this book begins with a detailed treatment of the nature and properties of metal-hydrogen systems, paying particular attention to the behavior of hydrogen in the bulk of the metal phase and the mechanism of reactions between metals and hydrogen or hydrogen-producing compounds. The reader is then introduced to the solubility of hydrogen in iron and ferrous alloys as well as the nature of the final product of the hydrogen-iron interaction. Subsequent chapters deal with dimensional changes and stresses produced in steel by cathodically evolved hydrogen; the effects of hydrogen on the physical, mechanical, and chemical properties of iron and steel; influence of welding on hydrogen; and sulfide corrosion cracking of steel. The effects of pickling on steel are also examined, along with the blistering and embrittlement caused by hydrogen on the base metal during electroplating. This book will be of value to students and practitioners in the field of physical chemistry.
Download or read book Hydrogen in Metals Application oriented properties written by G. Alefeld and published by . This book was released on 1978 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Interactions and Phase Transitions in Hydrogen Metal Systems written by Arthur Irving Shirley and published by . This book was released on 1987 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Structure and Properties of Hydrogen in Metals written by C.B. Satterthwaite and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen is the smallest impurity atom that can be implanted in a metallic host. Its small mass and strong interaction with the host electrons and nuclei are responsible for many anomalous and interesting solid state effects. In addition, hydrogen in metals gives rise to a number of technological problems such as hydrogen embrittlement, hydrogen storage, radiation hardening, first wall problems associated with nuclear fusion reactors, and degradation of the fuel cladding in fission reactors. Both the fundamental effects and applied problems have stimulated a great deal of inter est in the study of metal hydrogen systems in recent years. This is evident from a growing list of publications as well as several international conferences held in this field during the past decade. It is clear that a fundamental understanding of these problems re quires a firm knowledge of the basic interactions between hydrogen, host metal atoms, intrinsic lattice defects and electrons. This understanding is made particularly difficult by hyrogen's small mass and by the large lattice distortions that accompany the hydrogenation process. The purpose of the "International Symposium on the Electronic Structure and Properties of Hydrogen in Metals" held in Richmond, Virginia, March 4-6, 1982 was to increase our fundamental under standing of hydrogen in metals. Such knowledge is essential in solving technologically important questions. The symposium con sisted of twenty-two invited papers and seventy-two contributed poster presentations and attracted nearly 150 participants from thirteen countries. The proceedings of this symposium constitute this book.
Download or read book Hydrogen Materials Science and Chemistry of Metal Hydrides written by Michael D. Hampton and published by Springer Science & Business Media. This book was released on 2002-08-31 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of metal hydrides opens up promising avenues for the solution of world energy problems, as well as casting light on the interactions of hydrogen with materials, the role of hydrogen in materials science, and the chemistry of metal hydrides, all of which are discussed in this book in terms that range from a global look at the new vision of energy and how hydrogen fits into that future to reviews such as a look at nickel hydride over the last 40 years. Very specific current research in such areas as hydrogen in materials science discuss properties like superconductivity, diffusion EMF, magnetic properties, physicochemical properties, phase composition, and permeability. Hydrogen can also be used as a processing or alloying agent, and in the synthesis of battery electrodes, composite materials and alloys. The interaction of hydrogen with many metals, composites and alloys offers potential hydrogen storage systems. There is also a discussion of hydrogen sensors.
Download or read book Hydrogen Metal Systems II written by and published by . This book was released on 2000 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the behaviour of hydrogen in metals is one of the most pressing research tasks in the physical sciences. The embrittling effect of hydrogen in mild steel was recognised from the very beginnings of the Industrial Revolution, and its effects still plague modern alloys during either fabrication or use. At the same time, the tendency of certain alloys to form stable hydrides in a reversible manner holds out the promise of the safe storage of hydrogen in vehicles and therefore the prospect of non-polluting transport and a true 'hydrogen economy'. Researchers in this field will therefore welcome the publication of this 2-volume set, "Hydrogen Metal Systems I & II", which presents comprehensive information and critical data concerning ionic and metallic hydrides; all conveniently based upon a periodic-table layout. The new volume, "Hydrogen Metal,Systems II", complements its predecessor, "Hydrogen in Metal Systems I", by covering groups 6 to 11 of the periodic table. Both volumes will constitute an indispensable reference source for any library serving a physical sciences community. Somewhere within these pages must lie a clue to the ultimate solution of the twin puzzles of hydrogen embrittlement and safe, efficient hydrogen storage.
