Download or read book An Introduction to Bioreactor Hydrodynamics and Gas Liquid Mass Transfer written by Enes Kadic and published by John Wiley & Sons. This book was released on 2014-03-14 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews and compares the major types of bioreactors, defines their pros and cons, and identifies research needs and figures of merit that have yet to be addressed Describes common modes of operation in bioreactors Covers the three common bioreactor types, including stirred-tank bioreactors, bubble column bioreactors, and airlift bioreactors Details less common bioreactors types, including fixed bed bioreactors and novel bioreactor designs Discusses advantages and disadvantages of each bioreactor and provides a procedure for optimal bioreactor selection based on current process needs Reviews the problems of bioreactor selection globally while considering all bioreactor options rather than concentrating on one specific bioreactor type

Download or read book The Canadian Journal of Chemical Engineering written by and published by . This book was released on 2008-08 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2006 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the ASME Joint U S European Fluids Engineering Conference written by and published by . This book was released on 2006 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrodynamics and Transport Processes of Inverse Bubbly Flow written by Subrata Kumar Majumder and published by Elsevier. This book was released on 2016-03-31 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics and Transport Processes of Inverse Bubbly Flow provides the science and fundamentals behind hydrodynamic characteristics, including flow regimes, gas entrainment, pressure drop, holdup and mixing characteristics, bubble size distribution, and the interfacial area of inverse bubble flow regimes. Special attention is given to mass and heat transfer. This book is an indispensable reference for researchers in academia and industry working in chemical and biochemical engineering. Hydrodynamics and Transport Processes of Inverse Bubbly Flow helps facilitate a better understanding of the phenomena of multiphase flow systems as used in chemical and biochemical industries. - A first book in the market dedicated to the hydrodynamics of inverse bubbly flows - Includes fundamentals of conventional and inverse bubble columns for different hydrodynamic parameters - Includes recommendations for future applications of bubble flows

Download or read book Commencement written by Iowa State University and published by . This book was released on 2004 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tappi Journal written by and published by . This book was released on 2000-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Non Invasive Monitoring of Multiphase Flows written by J. Chaouki and published by Elsevier. This book was released on 1997-01-15 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Invasive Monitoring of Multiphase Flows is a result of the latest advances realized in non-invasive measurement of multiphase systems by means of various tomographic and velocimetric techniques. Written by experts on special topics within the realm of this subject, the book reviews in 15 chapters the theoretical background and the physics of the measurement process for each of a number of techniques. In addition, the mathematical modeling related to the measured property, such as in the image reconstitution problem for tomography, successful application of the techniques for measurement in various multiphase systems and their advantages and limitations are described. Features of this book: - Comprehensive and Complete. Covers both theoretical and application viewpoints of noninvasive measuring techniques in multiphase systems. There is no book available on this subject in the field of multiphase flows - Versatile. Material is presented in such a way that the book can be used either for research or for teaching graduate students specializing in the topic of multiphase flows - Awareness and Uniformity. The engineering community is made aware of advantages of these new techniques and they are presented in a uniform package. The editors strive to provide a comprehensive compendium of all the relevant information essential for practising engineers, consultants, university professors, graduate students and technicians who are involved in the study of multiphase flow phenomena. The book, although directed to the study of multiphase systems of interest to the chemical engineer, also provides valuable information for all other engineering disciplines that deal with multiphase systems.

Download or read book Theoretical Chemical Engineering Abstracts written by and published by . This book was released on 1986 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bubbly Flows written by Martin Sommerfeld and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarises the outcom of a priority research programme: 'Analysis, Modelling and Computation of Multiphase Flows'. The results of 24 individual research projects are presented. The main objective of the research programme was to provide a better understanding of the physical basis for multiphase gas-liquid flows as they are found in numerous chemical and biochemical reactors. The research comprises steady and unsteady multiphase flows in three frequently found reactor configurations, namely bubble columns without interiors, airlift loop reactors, and aerated stirred vessels. For this purpose new and improved measurement techniques were developed. From the resulting knowledge and data, new and refined models for describing the underlying physical processes were developed, which were used for the establishment and improvement of analytic as well as numerical methods for predicting multiphase reactors. Thereby, the development, lay-out and scale-up of such processes should be possible on a more reliable basis.

Download or read book Direct Contact Heat Transfer written by Frank Kreith and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: to increase the use of direct contact processes, the National Science Foundation sup ported a workshop on direct contact heat transfer at the Solar Energy Research Insti tute in the summer of 1985. We served as organizers for this workshop, which em phasized an area of thermal engineering that, in our opinion, has great promise for the future, but has not yet reached the point of wide-spread commercial application. Hence, a summary of the state of knowledge at this point is timely. The workshop had a dual objective: 1. To summarize the current state of knowledge in such a form that industrial practi tioners can make use of the available information. 2. To indicate the research and development needed to advance the state-of-the-art, indicating not only what kind of research is needed, but also the industrial poten tial that could be realized if the information to be obtained through the proposed research activities were available.

Download or read book Masters Abstracts International written by and published by . This book was released on 1996 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Diffusional Mass Transfer written by A. H. P. Skelland and published by . This book was released on 1974 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiphase Catalytic Reactors written by Zeynep Ilsen Önsan and published by John Wiley & Sons. This book was released on 2016-06-09 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a holistic approach to multiphase catalytic reactors from their modeling and design to their applications in industrial manufacturing of chemicals Covers theoretical aspects and examples of fixed-bed, fluidized-bed, trickle-bed, slurry, monolith and microchannel reactors Includes chapters covering experimental techniques and practical guidelines for lab-scale testing of multiphase reactors Includes mathematical content focused on design equations and empirical relationships characterizing different multiphase reactor types together with an assortment of computational tools Involves detailed coverage of multiphase reactor applications such as Fischer-Tropsch synthesis, fuel processing for fuel cells, hydrotreating of oil fractions and biofuels processing

Download or read book Advanced Fluid Dynamics written by Hyoung Woo Oh and published by BoD – Books on Demand. This book was released on 2012-03-09 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad range of topics on fluid dynamics for advanced scientists and professional researchers. The text helps readers develop their own skills to analyze fluid dynamics phenomena encountered in professional engineering by reviewing diverse informative chapters herein.

Download or read book Process and Chemical Engineering written by and published by . This book was released on 1998 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Reactor Modeling written by Hugo A. Jakobsen and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 1589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Reactor Modeling closes the gap between Chemical Reaction Engineering and Fluid Mechanics. The second edition consists of two volumes: Volume 1: Fundamentals. Volume 2: Chemical Engineering Applications In volume 1 most of the fundamental theory is presented. A few numerical model simulation application examples are given to elucidate the link between theory and applications. In volume 2 the chemical reactor equipment to be modeled are described. Several engineering models are introduced and discussed. A survey of the frequently used numerical methods, algorithms and schemes is provided. A few practical engineering applications of the modeling tools are presented and discussed. The working principles of several experimental techniques employed in order to get data for model validation are outlined. The monograph is based on lectures regularly taught in the fourth and fifth years graduate courses in transport phenomena and chemical reactor modeling and in a post graduate course in modern reactor modeling at the Norwegian University of Science and Technology, Department of Chemical Engineering, Trondheim, Norway. The objective of the book is to present the fundamentals of the single-fluid and multi-fluid models for the analysis of single and multiphase reactive flows in chemical reactors with a chemical reactor engineering rather than mathematical bias. Organized into 13 chapters, it combines theoretical aspects and practical applications and covers some of the recent research in several areas of chemical reactor engineering. This book contains a survey of the modern literature in the field of chemical reactor modeling.