Download or read book Hydraulic Principles and Design Concepts for Submain Units with Multiple Outlet Pipelines written by Gürol Yıldırım and published by Springer Nature. This book was released on 2023-06-25 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art review of recent analytical developments on multi-outlets pipe flow hydraulics and alternative hydraulic design concepts. For this purpose, the book presents simple, but sufficiently accurate analytical equations, that can be applied directly without needing any numerical technique to achieve whole hydraulic computations. The analytical procedures explained here give an opportunity for designers to better understand the basic hydraulic principles of multi-outlet pipe flow, and demonstrate their applicability and efficiency to design problems of multi-outlet sub-main lines, covering various design configurations.
Download or read book Handbook on Pressurized Irrigation Techniques written by Andreas Phocaides and published by Food & Agriculture Org.. This book was released on 2007 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing the efficiency of water use and enhancing agricultural water productivity at all levels of the production chains are becoming priorities in a growing number of countries. In particular, shifting to modern on-farm irrigation practices can contribute to a substantial increase in both water use efficiency and water productivity. The objective of this handbook is to provide a practical guide on the use of pressurized irrigation techniques to farmers, irrigation technicians, and extension workers in the field. In this second edition, the handbook has been considerably revised, including new chapters on low-cost drip irrigation and pipe distribution systems for smallholders.--Publisher's description.
Download or read book Hydraulics of Pipeline Systems written by Bruce E. Larock and published by CRC Press. This book was released on 1999-09-28 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of its kind, this modern, comprehensive text covers both analysis and design of piping systems. The authors begin with a review of basic hydraulic principles, with emphasis on their use in pumped pipelines, manifolds, and the analysis and design of large pipe networks. After the reader obtains an understanding of how these principles are implemented in computer solutions for steady state problems, the focus then turns to unsteady hydraulics. These are covered at three levels:
Download or read book Drip And Sprinkler Irrigation written by Ranajit Kumar Biswas and published by New India Publishing Agency. This book was released on 2015-01-15 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Drip and Sprinkler Irrigation is intended as a text book of micro irrigation design and practices for the students of the agricultural sciences and the professionals and workers in the field of micro irrigation. The book discusses the type and components, hydraulics and design, installation and maintenance of micro irrigation system. It contains good number of numerical as example and task to get the students familiar to the requirements, complicacies, and possible remedies in actual working condition. In addition to conventional broad and short questions in every of the book there are multiple choice questions to assist the students in preparing the competitive examinations.
Download or read book Irrigation and Drainage Engineering written by Peter Waller and published by Springer. This book was released on 2015-11-18 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook focuses specifically on the combined topics of irrigation and drainage engineering. It emphasizes both basic concepts and practical applications of the latest technologies available. The design of irrigation, pumping, and drainage systems using Excel and Visual Basic for Applications programs are explained for both graduate and undergraduate students and practicing engineers. The book emphasizes environmental protection, economics, and engineering design processes. It includes detailed chapters on irrigation economics, soils, reference evapotranspiration, crop evapotranspiration, pipe flow, pumps, open-channel flow, groundwater, center pivots, turf and landscape, drip, orchards, wheel lines, hand lines, surfaces, greenhouse hydroponics, soil water movement, drainage systems design, drainage and wetlands contaminant fate and transport. It contains summaries, homework problems, and color photos. The book draws from the fields of fluid mechanics, soil physics, hydrology, soil chemistry, economics, and plant sciences to present a broad interdisciplinary view of the fundamental concepts in irrigation and drainage systems design.
Download or read book Power Hydraulics written by Michael J. Pinches and published by Prentice Hall. This book was released on 1989 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering and Design Structural Deformation Surveying Engineer Manual Em 1110 2 1009 written by and published by . This book was released on 2002-06-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides technical guidance for performing precise structural deformation surveys of locks, dams, and other hydraulic flood control or navigation structures. Accuracy, procedural, and quality control standards are defined for monitoring displacements in hydraulic structures.
Download or read book Contour levee Irrigation written by and published by . This book was released on 1969 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Landscape Irrigation Design written by Eugene W. Rochester and published by American Society of Agricultural & Biological Engineers. This book was released on 1995 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Landscape Irrigation Design provides information and approaches to assist the successful irrigation designer. Beginning with basic concepts, the text discusses the soil, plants, water and their interactions, sprinkler selection and spacing, water supply and distribution, controllers, electrical wiring, pumps and pump selection, and drip irrigation and ends with completed irrigation designs. Although the focus is on residential irrigation design, larger designs such as golf courses are also discussed. Careful presentation of a wealth of resource material allows this work to serve as both an introductory text as well as an independent learning aid and makes Landscape Irrigation Design a valuable reference for first and subsequent design projects.
Download or read book Irrigation and Water Resources Engineering written by G. L. Asawa and published by New Age International. This book was released on 2006 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Book Irrigation And Water Resources Engineering Deals With The Fundamental And General Aspects Of Irrigation And Water Resources Engineering And Includes Recent Developments In Hydraulic Engineering Related To Irrigation And Water Resources Engineering. Significant Inclusions In The Book Are A Chapter On Management (Including Operation, Maintenance, And Evaluation) Of Canal Irrigation In India, Detailed Environmental Aspects For Water Resource Projects, A Note On Interlinking Of Rivers In India, And Design Problems Of Hydraulic Structures Such As Guide Bunds, Settling Basins Etc.The First Chapter Of The Book Introduces Irrigation And Deals With The Need, Development And Environmental Aspects Of Irrigation In India. The Second Chapter On Hydrology Deals With Different Aspects Of Surface Water Resource. Soil-Water Relationships Have Been Dealt With In Chapter 3. Aspects Related To Ground Water Resource Have Been Discussed In Chapter 4. Canal Irrigation And Its Management Aspects Form The Subject Matter Of Chapters 5 And 6. Behaviour Of Alluvial Channels And Design Of Stable Channels Have Been Included In Chapters 7 And 8, Respectively. Concepts Of Surface And Subsurface Flows, As Applicable To Hydraulic Structures, Have Been Introduced In Chapter 9. Different Types Of Canal Structures Have Been Discussed In Chapters 10, 11, And 13. Chapter 12 Has Been Devoted To Rivers And River Training Methods. After Introducing Planning Aspects Of Water Resource Projects In Chapter 14, Embankment Dams, Gravity Dams And Spillways Have Been Dealt With, Respectively, In Chapters 15, 16 And 17.The Students Would Find Solved Examples (Including Design Problems) In The Text, And Unsolved Exercises And The List Of References Given At The End Of Each Chapter Useful.
Download or read book Sprinkle and Trickle Irrigation written by Jack Keller and published by Springer. This book was released on 2012-11-05 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design text, Sprinkle and Trickle Irrigation, opens up a new and clear window through which to view the physics, economics, design, and manage ment of pressurized irrigation systems. A broad array of system types and ap plications have been covered in detail to provide for complete understanding of systems design. Topics include soil-water-plant relations, general planning con cepts, hydraulics, economics, sizing, operation, maintenance, and special uses. Pressurized irrigation system types covered include hand-line, wheel-line, solid set, traveler, center-pivot, linear-moving and big-gun-sprinkler systems, pump ing systems, and a broad array of trickle system components. The work in this text culminates earlier major works by Jack Keller on the W. R. Ames Company Irrigation Handbook (1967), Rain Bird Sprinkler Man ufacturing Corp. 's Trickle Irrigation Design (1975), and the USDA-Soil Con servation Service's National Engineering Handbook, Section 15: Irrigation Chapter 11: Sprinkle Irrigation (1983) and Chapter 15: Trickle Irrigation (1984). These earlier works form the foundation upon which the majority of currently used design texts are based. The years of design and troubleshooting experiences of the authors and wide ranges of environments and design appli cations in which they have worked have resulted in the substance and robustness of this text in stated relationships and procedures.
Download or read book Sewerage and Sewage Treatment written by Harold Eaton Babbitt and published by . This book was released on 1922 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Digital Manufacturing Science written by Zude Zhou and published by Springer Science & Business Media. This book was released on 2011-10-22 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing industry will reap significant benefits from encouraging the development of digital manufacturing science and technology. Digital Manufacturing Science uses theorems, illustrations and tables to introduce the definition, theory architecture, main content, and key technologies of digital manufacturing science. Readers will be able to develop an in-depth understanding of the emergence and the development, the theoretical background, and the techniques and methods of digital manufacturing science. Furthermore, they will also be able to use the basic theories and key technologies described in Digital Manufacturing Science to solve practical engineering problems in modern manufacturing processes. Digital Manufacturing Science is aimed at advanced undergraduate and postgraduate students, academic researchers and researchers in the manufacturing industry. It allows readers to integrate the theories and technologies described with their own research works, and to propose new ideas and new methods to improve the theory and application of digital manufacturing science.
Download or read book Seawater Intrusion in Coastal Aquifers written by Jacob Bear and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coastal aquifers serve as major sources for freshwater supply in many countries around the world, especially in arid and semi-arid zones. Many coastal areas are also heavily urbanized, a fact that makes the need for freshwater even more acute. Coastal aquifers are highly sensitive to disturbances. Inappropriate management of a coastal aquifer may lead to its destruction as a source for freshwater much earlier than other aquifers which are not connected to the sea. The reason is the threat of seawater intrusion. In many coastal aquifers, intrusion of seawater has become one of the major constraints imposed on groundwater utilization. As sea water intrusion progresses, existing pumping wells, especially those close to the coast, become saline and have to be abandoned. Also, the area above the intruding seawater wedge is lost as a source of natural replenishment to the aquifer. Despite the importance of this subject, so far there does not exist a book that integrates our present knowledge of seawater intrusion, its occurrences, physical mechanism, chemistry, exploration by geo physical and geochemical techniques, conceptual and mathematical modeling, analytical and numerical solution methods, engineering measures of combating seawater intrusion, management strategies, and experience learned from case studies. By presenting this fairly comprehensive volume on the state-of-the-art of knowledge and ex perience on saltwater intrusion, we hoped to transfer this body of knowledge to the geologists, hydrologists, hydraulic engineers, water resources planners, managers, and governmental policy makers, who are engaged in the sustainable development of coastal fresh ground water resources.
Download or read book Erosion and Sedimentation Manual written by and published by Government Printing Office. This book was released on 2006 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: NOTE: NO FURTHER DISCOUNT FOR THIS PRINT PRODUCT--OVERSTOCK SALE --Significantly reduced list price while supplies last The Erosion and Sedimentation Manual provides a comprehensive coverage of subjects in nine chapters (i.e., introduction, erosion and reservoir sedimentation, noncohesive sediment transport, cohesive sediment transport, sediment modeling for rivers and reservoirs, sustainable development and use of reservoirs, river process and restoration, dam decommissioning and sediment management, and reservoir surveys and data analysis). Each chapter is self-contained, with cross references of subjects that are discussed in different chapters of this manual. The manual also includes a list of commonly used notations used in the erosion and sedimentation literature, conversion factors between the Imperial and metric units, physical properties of water, and author and subject indexes for easy reference. Each chapter has a list of reference for readers who would like to seek out more detailed information on specific subjects. Audience The manual would be useful for researchers, university professors, graduate students, geologists, hydrographic survey analysts, municipal and state water research specialists, and engineers in solving erosion and sedimentation problems. Related products: Earth Science resources collection can be found here: https: //bookstore.gpo.gov/catalog/science-technology/earth-science
Download or read book Irrigation Manual written by Andreas Savva and published by Food & Agriculture Org. This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual (most of whose modules were originally published 2001-2002) aims at strengthening various aspects of irrigation development, mainly emphasizing the engineering, agronomic and economic aspects of smallholder irrigation, in view of the limited practical references available in this area. It also introduces the irrigation practitioner to the social, health and environmental aspects, providing a bridge between the various disciplines involved in irrigation development.--Publisher's description.
Download or read book Air release Air vacuum and Combination Air Valves written by and published by American Water Works Association. This book was released on 2001 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operators, technicians, and engineers will find the information in this manual useful for gaining a basic understanding of the use and application of air valves. A valuable guide for selecting, sizing, locating, and installing air valves in water applications, M51 provides information on air valve types listed in AWWA Standard C512, latest edition, including the following: air-release valve; air/vacuum valve; and combination air valve.
