Download or read book Hydraulic Fracturing for Oil and Gas written by U.s. Environmental Protection Agency and published by Createspace Independent Publishing Platform. This book was released on 2017-06-09 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This final report provides a review and synthesis of available scientific information concerning the relationship between hydraulic fracturing activities and drinking water resources in the United States. The report is organized around activities in the hydraulic fracturing water cycle and their potential to impact drinking water resources. The stages include: (1) acquiring water to be used for hydraulic fracturing (Water Acquisition), (2) mixing the water with chemical additives to prepare hydraulic fracturing fluids (Chemical Mixing), (3) injecting the hydraulic fracturing fluids into the production well to create fractures in the targeted production zone (Well Injection), (4) collecting the wastewater that returns through the well after injection (Produced Water Handling), and (5) managing the wastewater via disposal or reuse methods (Wastewater Disposal and Reuse). EPA found scientific evidence that hydraulic fracturing activities can impact drinking water resources under some circumstances. The report identifies certain conditions under which impacts from hydraulic fracturing activities can be more frequent or severe.
Download or read book Hydraulic Fracturing and Natural Gas Drilling written by Aarik Schultz and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing is a technique developed initially to stimulate oil production from wells in declining oil reservoirs. More recently, it has been used to initiate oil and gas production in unconventional reservoirs where these resources were previously inaccessible. This process is now used in more than 90% of new oil and gas production wells. Hydraulic fracturing is done after a well is drilled and involves injecting large volumes of water, sand and specialized chemicals under enough pressure to fracture the formations holding the oil or gas. The sand holds the fractures open to allow the oil or gas to flow freely out of the formation and into a production well. This book explores hydraulic fracturing and safe drinking water act issues as well as the public health and environmental impacts of natural gas drilling.
Download or read book The Fracking Debate written by Daniel Raimi and published by Columbia University Press. This book was released on 2017-12-26 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over roughly the past decade, oil and gas production in the United States has surged dramatically—thanks largely to technological advances such as high-volume hydraulic fracturing, more commonly known as “fracking.” This rapid increase has generated widespread debate, with proponents touting economic and energy-security benefits and opponents highlighting the environmental and social risks of increased oil and gas production. Despite the heated debate, neither side has a monopoly on the facts. In this book, Daniel Raimi gives a balanced and accessible view of oil and gas development, clearly and thoroughly explaining the key issues surrounding the shale revolution. The Fracking Debate directly addresses the most common questions and concerns associated with fracking: What is fracking? Does fracking pollute the water supply? Will fracking make the United States energy independent? Does fracking cause earthquakes? How is fracking regulated? Is fracking good for the economy? Coupling a deep understanding of the scholarly research with lessons from his travels to every major U.S. oil- and gas-producing region, Raimi highlights stories of the people and communities affected by the shale revolution, for better and for worse. The Fracking Debate provides the evidence and context that have so frequently been missing from the national discussion of the future of oil and gas production, offering readers the tools to make sense of this critical issue.
Download or read book Essentials of Hydraulic Fracturing written by Ralph W. Veatch and published by Pennwell Books. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing was first developed in the United States during the 1940s and has since spread internationally. A proven technology that is reaching deeper and tighter formations, hydraulic fracturing now delivers hydrocarbons from fields previously considered economically unviable. Essentials of Hydraulic Fracturing focuses on consolidating the fundamental basics of fracturing technology with advances in extended horizontal wellbores and fracturing applications. It provides the essentials required to understand fracturing behavior and offers advice for applying that knowledge to fracturing treatment design and application. Essentials of Hydraulic Fracturingis a long-awaited text for petroleum engineering students, industry-wide hydraulic fracturing training courses or seminars, and practicing fracturing treatment engineers. Features include: Understanding of fracture propagation geometry and fracture conductivity and how it affects treatment results A focus on safety and environmental prudence Economic optimization of fracturing treatments Fracturing fluid system and propping agent performance Important considerations in designing the fracture treatment for both vertical and horizontal wellbores Algorithms and examples pertinent to treatment design and analysis Pre- and post-fracturing approaches and diagnostics for evaluating treatment performance Hydraulic fracturing model construction and applicability Comparative design examples Construction of spreadsheet calculations key to treatment designs
Download or read book Environmental Impacts of Hydraulic Fracturing written by Frank R. Spellman and published by CRC Press. This book was released on 2012-09-17 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a strong need for innovation and the development of viable renewable energy sources. Recent technological advances now allow natural gas supplies—previously believed inaccessible or nonexistent—to be discovered, mined, and processed for both industrial and consumer use. The technology, a controversial process that is alternatively called hydraulic fracturing, fracking, fracing, or hydrofracking, has greatly expanded natural gas production in the United States. Presenting a balanced discussion, Environmental Impacts of Hydraulic Fracturing is a comprehensive guide to all aspects of hydraulic fracturing used to extract natural gas, along with gas exploration and production in various shale fields. As the use of hydraulic fracturing has grown, concerns about its environmental and public health impacts have also increased—one of the most significant concerns being the fluids that are injected into rock formations to cause the fracturing contain potentially hazardous chemical additives. The book covers all facets of the issue, including ongoing controversies about the environmental and operator safety issues arising from possible water pollution, drinking water contamination, on-the-job safety hazards, and harmful chemical exposure to workers and residents near well areas. The author discusses both the pros and cons of hydraulic fracturing, explaining the process in great detail. He describes the benefits of hydraulic fracturing and its importance in making the United States energy independent by drilling for its own resources, as well as the potential impacts to the surrounding environment. The text also includes suggestions and recommendations on how to mitigate environmental damage. Arguably the first book of its kind, this is the go-to text on the use and impacts of hydraulic fracturing.
Download or read book Hydraulic Fracturing written by Michael Berry Smith and published by CRC Press. This book was released on 2015-12-16 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing effectively busts the myths associated with hydraulic fracturing. It explains how to properly engineer and optimize a hydraulically fractured well by selecting the right materials, evaluating the economic benefits of the project, and ensuring the safety and success of the people, environment, and equipment. From data estimation
Download or read book Offshore Well Completion and Stimulation written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-06-08 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the public is generally aware of the use of hydraulic fracturing for unconventional resource development onshore, it is less familiar with the well completion and stimulation technologies used in offshore operations, including hydraulic fracturing, gravel packs, "fracpacks," and acid stimulation. Just as onshore technologies have improved, these well completion and stimulation technologies for offshore hydrocarbon resource development have progressed over many decades. To increase public understanding of these technologies, the National Academies of Sciences, Engineering, and Medicine established a planning committee to organize and convene a workshop on Offshore Well Completion and Stimulation: Using Hydraulic Fracturing and Other Technologies on October 2-3, 2017, in Washington, DC. This workshop examined the unique features about operating in the U.S. offshore environment, including well completion and stimulation technologies, environmental considerations and concerns, and health and safety management. Participants from across government, industry, academia, and nonprofit sectors shared their perspectives on operational and regulatory approaches to mitigating risks to the environment and to humans in the development of offshore resources. This publication summarizes the presentations and discussions from the workshop.
Download or read book Exploitation of Unconventional Oil and Gas Resources written by Kenneth Imo-Imo Israel Eshiet and published by . This book was released on 2019-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stimulation of unconventional hydrocarbon reservoirs is proven to improve their productivity to an extent that has rendered them economically viable. Generally, the stimulation design is a complex process dependent on intertwining factors such as the history of the formation, rock and reservoir fluid type, lithology and structural layout of the formation, cost, time, etc. A holistic grasp of these can be daunting, especially for people without sufficient experience and/or expertise in the exploitation of unconventional hydrocarbon reserves. This book presents the key facets integral to producing unconventional resources, and how the different components, if pieced together, can be used to create an integrated stimulation design. Areas covered are as follows: • stimulation methods, • fracturing fluids, • mixing and behavior of reservoir fluids, • assessment of reservoir performance, • integration of surface drilling data, • estimation of geomechanical properties and hydrocarbon saturation, and • health and safety. Exploitation of Unconventional Oil and Gas Resources: Hydraulic Fracturing and Other Recovery and Assessment Techniques is an excellent introduction to the subject area of unconventional oil and gas reservoirs, but it also complements existing information in the same discipline. It is an essential text for higher education students and professionals in academia, research, and the industry.
Download or read book Hydraulic Fracturing in Unconventional Reservoirs written by Hoss Belyadi and published by Gulf Professional Publishing. This book was released on 2019-06-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing in Unconventional Reservoirs: Theories, Operations, and Economic Analysis, Second Edition, presents the latest operations and applications in all facets of fracturing. Enhanced to include today’s newest technologies, such as machine learning and the monitoring of field performance using pressure and rate transient analysis, this reference gives engineers the full spectrum of information needed to run unconventional field developments. Covering key aspects, including fracture clean-up, expanded material on refracturing, and a discussion on economic analysis in unconventional reservoirs, this book keeps today's petroleum engineers updated on the critical aspects of unconventional activity. Helps readers understand drilling and production technology and operations in shale gas through real-field examples Covers various topics on fractured wells and the exploitation of unconventional hydrocarbons in one complete reference Presents the latest operations and applications in all facets of fracturing
Download or read book Geomechanics and Hydraulic Fracturing for Shale Reservoirs written by Yu Wang and published by Scientific Research Publishing, Inc. USA. This book was released on 2020-07-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as a reference book for advanced graduate students and research engineers in shale gas development or rock mechanical engineering. Globally, there is widespread interest in exploiting shale gas resources to meet rising energy demands, maintain energy security and stability in supply and reduce dependence on higher carbon sources of energy, namely coal and oil. However, extracting shale gas is a resource intensive process and is dependent on the geological and geomechanical characteristics of the source rocks, making the development of certain formations uneconomic using current technologies. Therefore, evaluation of the physical and mechanical properties of shale, together with technological advancements, is critical in verifying the economic viability of such formation. Accurate geomechanical information about the rock and its variation through the shale is important since stresses along the wellbore can control fracture initiation and frac development. In addition, hydraulic fracturing has been widely employed to enhance the production of oil and gas from underground reservoirs. Hydraulic fracturing is a complex operation in which the fluid is pumped at a high pressure into a selected section of the wellbore. The interaction between the hydraulic fractures and natural fractures is the key to fracturing effectiveness prediction and high gas development. The development and growth of a hydraulic fracture through the natural fracture systems of shale is probably more complex than can be described here, but may be somewhat predictable if the fracture system and the development of stresses can be explained. As a result, comprehensive shale geomechanical experiments, physical modeling experiment and numerical investigations should be conducted to reveal the fracturing mechanical behaviors of shale.
Download or read book Hydraulic Fracturing for Oil and Gas written by Usepa and published by . This book was released on 2017-01-30 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing is a technique used to increase oil and gas production from underground oil-or-gas-bearing rock formations. Since the mid-2000s, the combination of hydraulic fracturing and directional drilling has become widespread, raising concerns about the potential impacts of hydraulic fracturing on drinking water resources. This is the Executive Summary of the report on a study that assessed the potential for activities in the hydraulic fracturing water cycle to impact the quality or quantity of drinking water resources and to identify factors that affect the frequency or severity of those goals. The report is based on data and information gathered by the Environmental Protection Agency (EPA) through independent research, technical workshops and roundtables with stakeholders, and reviews of approximately 1,200 cited sources of data and information. Figures and tables. This is a print on demand report.
Download or read book Hydraulic Fracturing Impacts and Technologies written by Venkatesh Uddameri and published by CRC Press. This book was released on 2015-06-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing Impacts and Technologies: A Multidisciplinary Perspective serves as an introduction to hydraulic fracturing and provides balanced coverage of its benefits and potential negative effects. Presenting a holistic assessment of hydraulic fracturing and its environmental impacts, this book chronicles the history and development of unconventional oil and gas production and describes the risks associated with the use of these technologies. More specifically, it addresses hydraulic fracturing’s use and dependence on large amounts of water as a fracturing medium. It examines the limits of reusing flowback and produced water, explores cost-effective ways to clean or effectively dispose of water used in fracturing, and provides suggestions for the efficient use, discovery, and recycle potential of non-potable water. Utilizing a team of experts from industry and academia, the text provides readers with a multiple lens approach—incorporating various perspectives and solutions surrounding this evolving technology.
Download or read book The Power Surge written by Michael Levi and published by Oxford University Press. This book was released on 2014-10 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Looks at the clash between gas/oil proponents and supports of alternative energies and offers a plan for the future that combines the best of both worlds.
Download or read book Hydraulic Fracturing Explained written by Erle C. Donaldson and published by Elsevier. This book was released on 2014-02-25 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rocks mechanics legend Erle Donaldson, along with colleagues Waqi Alam and Nasrin Begum from the oil and gas consultant company Tetrahedron, have authored this handbook on updated fundamentals and more recent technology used during a common hydraulic fracturing procedure. Meant for technical and non-technical professionals interested in the subject of hydraulic fracturing, the book provides a clear and simple explanation of the technology and related issues to promote the safe development of petroleum reserves leading to energy independence throughout the world.
Download or read book Fracking and the Environment written by Daniel J. Soeder and published by Springer Nature. This book was released on 2020-11-11 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic scientific approach to the understanding of hydraulic fracturing (fracking) as a hydrocarbon extraction technology and its impact on the environment. The book addresses research from the past decade to assess how fracking can affect air, water, landscapes and ecosystems, and presents the subject in the context of the history of fracking and shale gas development in the United States, describing what is known and not known about environmental impacts, and the broader implications of fossil energy use, climate change, and technology development. In 9 chapters, the author lays out how and why hydraulic fracturing was developed, what driving forces existed at the beginning of the so-called "shale revolution", how success was achieved, and when and why public acceptance of the technology changed. The intended audience is scientific people who are concerned about fracking, but perhaps do not know all that much about it. It is also intended for lay people who would be interested in understanding the technical details of the process and what effects it might or might not be having on the environment. The book is written at a level that is both understandable and technically correct. A further goal is to give some useful insights even to experienced petroleum geologists and engineers who have been doing fracking for many years.
Download or read book Fracking written by Michael D. Holloway and published by John Wiley & Sons. This book was released on 2013-05-20 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the history, techniques, and materials used in the practice of induced hydraulic fracturing, one of today's hottest topics, for the production of natural gas, while examining the environmental and economic impact. You can't squeeze blood from a turnip, but you can release trapped natural gas from rock. At least that is what is being accomplished now throughout North America. Natural gas that is primarily methane has been proven to be an excellent fuel source. It can be safely burned to create heat to power engines, boilers in factories and homes as well as powering turbines for generating electricity. Projections on natural gas volumes trapped underground suggest a nearly inexhaustible supply of this product. Yet with such abundance comes controversy. A popular and economical technique relies on the gas from subterranean sources and requires fracturing rock bed. This process is actually carried out naturally every day with water or magma. Magma may flow into rock beds superheating water to generate steam. The resulting pressure of the expanding water molecules can be so great, it can lift and separate thousands of tons of rock deep beneath the Earth's surface. This same practice can be carried out artificially (induced) using high-powered pumps and various liquid compounds. This technique combined with new horizontal directional drilling machines have enabled the harvest and distribution of natural gas. But at what cost? Does this practice contribute to greenhouse gas? Does it create earthquakes? Does it contaminate the groundwater supply? These are important issues surrounding hydraulic fracturing, and they are covered here in detail.
Download or read book Hydraulic Fracturing written by and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
