Download or read book Hydraulic and Electro Hydraulic Control Systems written by R.B. Walters and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Force and motion control systems of varying degrees of sophistication have shaped the lives of all individuals living in industrialized countries all over the world, and together with communication technology are largely responsible for the high standard ofliving prevalent in many communities. The brains of the vast majority of current control systems are electronic, in the shape of computers, microprocessors or programmable logic controllers (PLC), the nerves are provided by sensors, mainly electromech anical transducers, and the muscle comprises the drive system, in most cases either electric, pneumatic or hydraulic. The factors governing the choice of the most suitable drive are the nature of the application, the performance specification, size, weight, environ mental and safety constraints, with higher power levels favouring hydraulic drives. Past experience, especially in the machine tool sector, has clearly shown that, in the face of competition from electric drives, it is difficult to make a convincing case for hydraulic drives at the bottom end of the power at fractional horsepower level. A further, and frequently range, specifically overriding factor in the choice of drive is the familiarity of the system designer with a particular discipline, which can inhibit the selection of the optimum and most cost-effective solution for a given application. One of the objectives of this book is to help the electrical engineer overcome his natural reluctance to apply any other than electric drives.
Download or read book Electro Hydraulic Control Theory and Its Applications Under Extreme Environment written by Yaobao Yin and published by Butterworth-Heinemann. This book was released on 2019-02-16 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electro hydraulic Control Theory and Its Applications under Extreme Environment not only presents an overview on the topic, but also delves into the fundamental mathematic models of electro hydraulic control and the application of key hydraulic components under extreme environments. The book contains chapters on hydraulic system design, including thermal analysis on hydraulic power systems in aircraft, power matching designs of hydraulic rudder, and flow matching control of asymmetric valves and cylinders. With additional coverage on new devices, experiments and application technologies, this book is an ideal reference on the research and development of significant equipment. Addresses valves' application in aircrafts, including servo valves, relief valves and pressure reducing valves Presents a qualitative and quantitative forecast of future electro-hydraulic servo systems, service performance, and mechanization in harsh environments Provides analysis methods, mathematical models and optimization design methods of electro-hydraulic servo valves under extreme environments
Download or read book Hydraulic and Electric Hydraulic Control Systems written by R. B. Walters and published by . This book was released on 2014-09-01 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Controlling Electrohydraulic Systems written by Wayne Anderson and published by CRC Press. This book was released on 1988-01-29 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the pump's role in electrohydraulic systems and its use as a power source to a control loop, and provides a good understanding of the basics, complemented by working knowledge of the "real world." It is intended for engineers and students who have studied feedback control theory.
Download or read book Hydraulic Control Systems written by Noah D. Manring and published by John Wiley & Sons. This book was released on 2019-09-24 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides key updates to a must-have text on hydraulic control systems This fully updated, second edition offers students and professionals a reliable and comprehensive guide to the hows and whys of today's hydraulic control system fundamentals. Complete with insightful industry examples, it features the latest coverage of modeling and control systems with a widely accepted approach to systems design. The book also offers all new information on: advanced control topics; auxiliary components (reservoirs, accumulators, coolers, filters); hybrid transmissions; multi-circuit systems; and digital hydraulics. Chapters in Hydraulic Control Systems, 2nd Edition cover; fluid properties; fluid mechanics; dynamic systems and control; hydraulic valves, pumps, and actuators; auxiliary components; and both valve and pump controlled hydraulic systems. The book presents illustrative case studies throughout that highlight important topics and demonstrate how equations can be implemented and used in the real world. It also features end-of-chapter exercises to help facilitate learning. It is a powerful tool for developing a solid understanding of hydraulic control systems that will serve all practicing engineers in the field. Provides a useful review of fluid mechanics and system dynamics Offers thorough analysis of transient fluid flow forces within valves Adds all new information on: advanced control topics; auxiliary components; hybrid transmissions; multi-circuit systems; and digital hydraulics Discusses flow ripple for both gear pumps and axial piston pumps Presents updated analysis of the pump control problems associated with swash plate type machines Showcases a successful methodology for hydraulic system design Features reduced-order models and PID controllers showing control objectives of position, velocity, and effort Hydraulic Control Systems, 2nd Edition is an important book for undergraduate and first-year graduate students taking courses in fluid power. It is also an excellent resource for practicing engineers in the field of fluid power.
Download or read book Hydraulic Control Systems written by Herbert E. Merritt and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of hydraulic control is rapidly growing and the objective of this book is to present a rational and well-balanced treatment of its components and systems. Coverage includes a review of applicable topics in fluid mechanisms; components encountered in hydraulic servo controlled systems; systems oriented issues and much more. Also offers practical suggestions concerning testing and limit cycle oscillation problems.
Download or read book Hydraulic and Electro Hydraulic Control Systems written by Ronald B. Walters and published by Kluwer Academic Publishers. This book was released on 2000-10-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication covers control sytems that employ proportionalcontrol elements, e.g., proportional control valves and hydrostatictransmissions, and gives extensive treatment to system modellingincluding algorithms for computer-based analysis.The three main features of this book are: The book essentially studies andanalyses force and motion control systems, from simple hydraulic tocomplex electro-hydraulic control systems, bridges the gap inknowledge between the control engineer and the average hydraulicapplication engineer, and provides a contribution towards the widerapplication of hydraulic systems.This second enlarged edition includes an entirely new addition- a tutor for the application of Hydro Analyst. The tutorprovides a hands-on' system simulation procedure for the systemmodelling package Hydro Analyst supplied with this edition as a floppydisk. The package contains an extensive component database andcomprehensive graphics facilities.This book will be of interest to engineers working in hydraulics andcontrol.
Download or read book Electro Hydraulic Components and Systems written by Medhat M K Dr Khalil and published by . This book was released on 2017-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second in its series. The book focuses on the electrohydraulic valves in building open-loop and closed-loop control systems. The book also covers the control electronics that drive the EH valves.
Download or read book Electro Hydraulic Actuation Systems written by J. Jaidev Vyas and published by Springer. This book was released on 2018-09-01 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves as a unique integrated platform, which not only describes the design methodology of electro-hydraulic actuation systems but also provides insights into the design of the servo valve, which is the most important component in the system. It presents a step-by-step design process, comparative tables, illustrative figures, and detailed explanations. The book focuses on the design and testing of electro-hydraulic actuation systems, which are increasingly being used in motion control applications, particularly in those where precision actuation at high operational rates is of prime importance. It describes in detail the design philosophy of such high-performance systems, presenting a system used as a physical test setup together with experimental results to corroborate the calculations. Of particular interest are the electro-hydraulic servo valves that form the heart of these actuations. These valves are complex and not much data is available in open literature due to OEM propriety issues. In this context, the book discusses the elaborate mathematical models that have been derived and an approach to validate the mathematical models with test results. Presenting the complex methodology in simple language, it will prove to be a valuable resource for students, researchers, and professional engineers alike.
Download or read book Nonlinear Control Techniques for Electro Hydraulic Actuators in Robotics Engineering written by Qing Guo and published by CRC Press. This book was released on 2017-08-14 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control Techniques for Electro-Hydraulic Actuators in Robotics Engineering meets the needs of those working in advanced electro-hydraulic controls for modern mechatronic and robotic systems. The non-linear EHS control methods covered are proving to be more effective than traditional controllers, such as PIDs. The control strategies given address parametric uncertainty, unknown external load disturbance, single-rod actuator characteristics, and control saturation. Theoretical and experimental validations are explained, and examples provided. Based on the authors' cutting-edge research, this work is an important resource for engineers, researchers, and students working in EHS.
Download or read book Hydraulic Control Systems written by Shizurou Konami and published by World Scientific Publishing Company. This book was released on 2016-08-19 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hydraulic system controls the transmission of energy. It transforms the mechanical energy of a prime motor into fluid energy. It controls the fluid configuration and transforms the fluid energy into mechanical work at specified locations. Hydraulic systems feature high power density, sensitive response and precision of control, especially when operating under computer control. Thus, they have been widely used as the energy transmission control systems in aircraft, ships, construction machinery, machine tools and others. Therefore, it is indispensable for a mechanical engineer to become versed with hydraulic control technology. The technology is mainly associated with fluid mechanics and control theories, but it is related to the wider field of engineering as well. This book provides a comprehensive treatment of the analysis and design of hydraulic control systems which will be invaluable for practising engineers, as well as undergraduate and graduate students specializing in mechanical engineering. Firstly, the fundamental concepts of hydraulic control systems are addressed, and illustrated by reference to applications in the field of aviation engineering. Secondly, the fluid mechanics necessary for the comprehension of hydraulic elements are provided. The technology of the hydraulic components composing hydraulic control systems is addressed, the key focus being on how to apply theoretical concepts into the design and analysis of hydraulic components and systems. Finally, there is a discussion on fundamental control technology and its application to hydraulic servo systems. This includes the formation of hydraulic servo systems, basic control theorems, methods identifying the dynamic characteristics of hydraulic actuator systems, and a design method for hydraulic control systems. Numerical exercises are provided at the end of each chapter. Request Inspection Copy
Download or read book Hydraulic Fluid Power written by Andrea Vacca and published by John Wiley & Sons. This book was released on 2021-04-28 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: HYDRAULIC FLUID POWER LEARN MORE ABOUT HYDRAULIC TECHNOLOGY IN HYDRAULIC SYSTEMS DESIGN WITH THIS COMPREHENSIVE RESOURCE Hydraulic Fluid Power provides readers with an original approach to hydraulic technology education that focuses on the design of complete hydraulic systems. Accomplished authors and researchers Andrea Vacca and Germano Franzoni begin by describing the foundational principles of hydraulics and the basic physical components of hydraulics systems. They go on to walk readers through the most practical and useful system concepts for controlling hydraulic functions in modern, state-of-the-art systems. Written in an approachable and accessible style, the book’s concepts are classified, analyzed, presented, and compared on a system level. The book also provides readers with the basic and advanced tools required to understand how hydraulic circuit design affects the operation of the equipment in which it’s found, focusing on the energy performance and control features of each design architecture. Readers will also learn how to choose the best design solution for any application. Readers of Hydraulic Fluid Power will benefit from: Approaching hydraulic fluid power concepts from an “outside-in” perspective, emphasizing a problem-solving orientation Abundant numerical examples and end-of-chapter problems designed to aid the reader in learning and retaining the material A balance between academic and practical content derived from the authors’ experience in both academia and industry Strong coverage of the fundamentals of hydraulic systems, including the equations and properties of hydraulic fluids Hydraulic Fluid Power is perfect for undergraduate and graduate students of mechanical, agricultural, and aerospace engineering, as well as engineers designing hydraulic components, mobile machineries, or industrial systems.
Download or read book Hydraulic Systems Volume 7 written by Medhat Khalil and published by Compudraulic LLC. This book was released on 2020-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book adopted lumped modeling technique, using Matlab-Simulink, to model discrete hydraulic components that can be re-characterized and used repeatedly in system models.
Download or read book Fundamentals of Fluid Power Control written by John Watton and published by Cambridge University Press. This book was released on 2009-08-24 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exciting reference text is concerned with fluid power control. It is an ideal reference for the practising engineer and a textbook for advanced courses in fluid power control. In applications in which large forces and/or torques are required, often with a fast response time, oil-hydraulic control systems are essential. They excel in environmentally difficult applications because the drive part can be designed with no electrical components and they almost always have a more competitive power/weight ratio compared to electrically actuated systems. Fluid power systems have the capability to control several parameters, such as pressure, speed, position, and so on, to a high degree of accuracy at high power levels. In practice there are many exciting challenges facing the fluid power engineer, who now must preferably have a broad skill set.
Download or read book Hydraulic Control Systems written by Noah Manring and published by John Wiley & Sons. This book was released on 2005-04-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique resource that demystifies the physical basics of hydraulic systems Hydraulic Control Systems offers students and professionals a reliable, complete volume of the most up-to-date hows and whys of today's hydraulic control system fundamentals. Complete with insightful industry examples, it features the latest coverage of modeling and control systems with a widely accepted approach to systems design. Hydraulic Control Systems is a powerful tool for developing a solid understanding of hydraulic control systems that will serve the practicing engineer in the field. Throughout the book, illustrative case studies highlight important topics and demonstrate how equations can be implemented and used in the real world. Featuring exercise problems at the end of every chapter, Hydraulic Control Systems presents: A useful review of fluid mechanics and system dynamics Thorough analysis of transient fluid flow forces within valves Discussions of flow ripple for both gear pumps and axial piston pumps Updated analysis of the pump control problems associated with swash plate type machines A successful methodology for hydraulic system design—starting from the load point of the system and working backward to the ultimate power source Reduced-order models and PID controllers showing control objectives of position, velocity, and effort
Download or read book Design of Electrohydraulic Systems for Industrial Motion Control written by Parker Hannifin Corporation and published by . This book was released on 1995 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains engineering information for the design of electro hydraulic motion control systems plus problems
Download or read book FLUID POWER CONTROL SYSTEMS written by MD FAIYAZ AHMED and published by Lulu.com. This book was released on 2016-10-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed coverage of the concepts of Hydraulics, Pneumatic, Control valves, Lever systems. Objective type questions included in each chapter. Detailed study of each and every topic in the chapter.
