Download or read book Hydraulic Actuator Force Control written by Masoumeh Esfandiari and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonlinear Control Techniques for Electro Hydraulic Actuators in Robotics Engineering written by Qing Guo and published by CRC Press. This book was released on 2017-08-14 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Control Techniques for Electro-Hydraulic Actuators in Robotics Engineering meets the needs of those working in advanced electro-hydraulic controls for modern mechatronic and robotic systems. The non-linear EHS control methods covered are proving to be more effective than traditional controllers, such as PIDs. The control strategies given address parametric uncertainty, unknown external load disturbance, single-rod actuator characteristics, and control saturation. Theoretical and experimental validations are explained, and examples provided. Based on the authors' cutting-edge research, this work is an important resource for engineers, researchers, and students working in EHS.

Download or read book Pressure based Force velocity Control of a Linear Hydraulic Actuator written by Scott M. Lyon and published by . This book was released on 1999 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book On Motion Control of Linear Incremental Hydraulic Actuators written by Martin Hochwallner and published by Linköping University Electronic Press. This book was released on 2017-10-24 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear Incremental Hydraulic Actuators combine one or more short-stroke cylinders, and two or more engaging/disengaging mechanisms into one actuator with long, medium, or even unlimited stroke length. The motion of each single short-stroke actuator concatenated by the engaging/disengaging mechanisms forms the motion of the linear incremental hydraulic actuator. The patterns of how these motions are concatenated form the gaits of a specific linear incremental hydraulic actuator. Linear incremental hydraulic actuators may have more than one gait. In an application, the gaits may be combined to achieve optimal performance at various operating points. The distinguishing characteristic of linear incremental hydraulic actuators is the incremental motion. The term incremental actuator is seen as analogous to the incremental versus absolute position sensor. Incremental actuators realize naturally relative positioning. Incremental motion means also that the behavior does not depend on an absolute position but only on the relative position within a cycle or step. Incremental actuators may realize discrete incremental or continuous incremental motion. Discrete incremental actuators can only approach discrete positions, whereby stepper drives are one prominent example. In contrast, continuous incremental actuators may approach any position. Linear electric motors are one example of continuous incremental actuators. The actuator has no inherent limitation in stroke length, as every step or cycle adds only to the state at the beginning of the step or cycle and does not depend on the absolute position. This led to the alternative working title Hydraulic Infinite Linear Actuator. Linear incremental hydraulic actuator provides long stroke, high force, and linear motion and has the potential to decrease the necessary resource usage,minimize environmental impact, e.g. from potential oil spillage,extend the range of feasible products: longer, stiffer, better, etc. This thesis presents an analysis of the characteristics and properties of linear incremental hydraulic actuators as well as the gaits and possible realizations of some gaits. The gait for continuous, smooth motion with two cylinders is comprehensively studied and a control concept for the tracking problem is proposed. The control concept encapsulates the complexity of the linear incremental hydraulic actuator so that an application does not have to deal with it. One other gait, the ballistic gait, which realizes fast, energy-efficient motion, enabling energy recuperation is studied.

Download or read book Adaptive Force Control of Hydraulic Actuator Systems for Dynamic Structural Testing written by Sayed Shehata Karar and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Control of Beat up Force Using a Microprocessor Controlled Hydraulic Actuator written by Alon Sternheim and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Control of Beat up Force Using a Micoprocessor Controlled Hydraulic Actuator written by Alon Sternheim and published by . This book was released on 1989 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adaptive Position and Force Control of Hydraulic Robots written by Gang Wu and published by . This book was released on 1997 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adaptive Position and Force Control of Hydraulic Robots Theory Simulation and Experiments written by and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Hydraulic Actuator Using High speed On off Valves written by Kitti Wattananithiporn and published by . This book was released on 2002 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Force Control of Electro hydraulic Actuators in an Underwater Fish like Vehicle written by Jonah Timothy Peskin and published by . This book was released on 2000 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulic Control Systems Theory And Practice written by Shizurou Konami and published by World Scientific Publishing Company. This book was released on 2016-08-19 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hydraulic system controls the transmission of energy. It transforms the mechanical energy of a prime motor into fluid energy. It controls the fluid configuration and transforms the fluid energy into mechanical work at specified locations. Hydraulic systems feature high power density, sensitive response and precision of control, especially when operating under computer control. Thus, they have been widely used as the energy transmission control systems in aircraft, ships, construction machinery, machine tools and others. Therefore, it is indispensable for a mechanical engineer to become versed with hydraulic control technology. The technology is mainly associated with fluid mechanics and control theories, but it is related to the wider field of engineering as well.This book provides a comprehensive treatment of the analysis and design of hydraulic control systems which will be invaluable for practising engineers, as well as undergraduate and graduate students specializing in mechanical engineering. Firstly, the fundamental concepts of hydraulic control systems are addressed, and illustrated by reference to applications in the field of aviation engineering. Secondly, the fluid mechanics necessary for the comprehension of hydraulic elements are provided. The technology of the hydraulic components composing hydraulic control systems is addressed, the key focus being on how to apply theoretical concepts into the design and analysis of hydraulic components and systems. Finally, there is a discussion on fundamental control technology and its application to hydraulic servo systems. This includes the formation of hydraulic servo systems, basic control theorems, methods identifying the dynamic characteristics of hydraulic actuator systems, and a design method for hydraulic control systems. Numerical exercises are provided at the end of each chapter.

Download or read book Electro Hydraulic Actuation Systems written by J. Jaidev Vyas and published by Springer. This book was released on 2018-09-01 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves as a unique integrated platform, which not only describes the design methodology of electro-hydraulic actuation systems but also provides insights into the design of the servo valve, which is the most important component in the system. It presents a step-by-step design process, comparative tables, illustrative figures, and detailed explanations. The book focuses on the design and testing of electro-hydraulic actuation systems, which are increasingly being used in motion control applications, particularly in those where precision actuation at high operational rates is of prime importance. It describes in detail the design philosophy of such high-performance systems, presenting a system used as a physical test setup together with experimental results to corroborate the calculations. Of particular interest are the electro-hydraulic servo valves that form the heart of these actuations. These valves are complex and not much data is available in open literature due to OEM propriety issues. In this context, the book discusses the elaborate mathematical models that have been derived and an approach to validate the mathematical models with test results. Presenting the complex methodology in simple language, it will prove to be a valuable resource for students, researchers, and professional engineers alike.

Download or read book Study of an Energy Conserving Hydraulic Servo Actuator written by Jesse Eugene Cornwell and published by . This book was released on 1994 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Analysis and Control of Hydraulic Actuator for Forging written by Xinjiang Lu and published by Springer. This book was released on 2017-12-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes load modeling approaches for complex work pieces and batch forgings, and demonstrates analytical modeling and data-driven modeling approaches for known and unknown complex forging processes. It overcomes the current shortcomings of modeling, analysis and control approaches, presenting contributions in three major areas: In the first, several novel modeling approaches are proposed: a process/shape-decomposition modeling method to help estimate the deformation force; an online probabilistic learning machine for the modeling of batch forging processes; and several data-driven identification and modeling approaches for unknown forging processes under different work conditions. The second area develops model-based dynamic analysis methods to derive the conditions of stability and creep. Lastly, several novel intelligent control methods are proposed for complex forging processes. One of the most serious problems in forging forming involves the inaccurate forging conditions, velocity and position offered by the hydraulic actuator due to the complexity of both the deformation process of the metal work piece and the motion process of the hydraulic actuator. The book summarizes the current weaknesses of modeling, analysis and control approaches. are summarized as follows: a) With the current modeling approaches it is difficult to model complex forging processes with unknown parameters, as they only model the dynamics in local working areas but do not effectively model unknown nonlinear systems across multiple working areas; further, they do not take the batch forging process into account, let alone its distribution modeling. b) All previous dynamic analysis studies simplify the forging system to having a single-frequency pressure fluctuation and neglect the influences of non-linear load force. Further, they fail to take the flow equation in both valves and cylinders into account. c) Conventional control approaches only consider the linear deformation force and pay no attention to sudden changes and the motion synchronization for the multi-cylinder system, making them less effective for complex, nonlinear time-varying forging processes subject to sudden changes.

Download or read book Hydraulic Control Systems written by Noah D. Manring and published by John Wiley & Sons. This book was released on 2019-09-24 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides key updates to a must-have text on hydraulic control systems This fully updated, second edition offers students and professionals a reliable and comprehensive guide to the hows and whys of today's hydraulic control system fundamentals. Complete with insightful industry examples, it features the latest coverage of modeling and control systems with a widely accepted approach to systems design. The book also offers all new information on: advanced control topics; auxiliary components (reservoirs, accumulators, coolers, filters); hybrid transmissions; multi-circuit systems; and digital hydraulics. Chapters in Hydraulic Control Systems, 2nd Edition cover; fluid properties; fluid mechanics; dynamic systems and control; hydraulic valves, pumps, and actuators; auxiliary components; and both valve and pump controlled hydraulic systems. The book presents illustrative case studies throughout that highlight important topics and demonstrate how equations can be implemented and used in the real world. It also features end-of-chapter exercises to help facilitate learning. It is a powerful tool for developing a solid understanding of hydraulic control systems that will serve all practicing engineers in the field. Provides a useful review of fluid mechanics and system dynamics Offers thorough analysis of transient fluid flow forces within valves Adds all new information on: advanced control topics; auxiliary components; hybrid transmissions; multi-circuit systems; and digital hydraulics Discusses flow ripple for both gear pumps and axial piston pumps Presents updated analysis of the pump control problems associated with swash plate type machines Showcases a successful methodology for hydraulic system design Features reduced-order models and PID controllers showing control objectives of position, velocity, and effort Hydraulic Control Systems, 2nd Edition is an important book for undergraduate and first-year graduate students taking courses in fluid power. It is also an excellent resource for practicing engineers in the field of fluid power.

Download or read book Hydraulic Servo systems written by Mohieddine Jelali and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date book details the basic concepts of many recent developments of nonlinear identification and nonlinear control, and their application to hydraulic servo-systems. It is very application-oriented and provides the reader with detailed working procedures and hints for implementation routines and software tools.