Download or read book Renewable and Scalable Energy Storage Materials Derived from Quinones in Biomass written by Lianlian Liu and published by Linköping University Electronic Press. This book was released on 2020-08-31 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently there is an urgent need to reduce the use of fossil fuels, and efficient sustainable energy harvesters from sun and wind have been developed and are widely used for electricity generation. Storage of electrical energy is accordingly necessary to accommodate the time varying supply of wind and solar electricity. Quinones (Q) are attractive as energy storage materials due to their high theoretical charge density and the renewable and abundant source – biomass. Plant-based biomass materials – such as lignin and humic acids – contain redox active Q-groups that potentially could be used for electricity storage instead of simply burning the biomass, which releases CO2, CH4, NOx, and SOx. Lignin accounts for 20-30% of the biomass weight and contains a sizable fraction of Q-structures. However, utilization of lignin for large scale energy storage is still a challenging task, as lignin is electrically insulating and conductive materials are required to get access to the generated electrons in the bulk. Various relatively expensive materials, such as conductive polymers and various carbon materials (carbon nanotubes, active carbon, graphene, etc.) have been combined with lignin, resulting in hybrid materials for energy storage. However, as the scale required for production of charge storage devices is huge it is of outmost importance to reduce the cost and therefore investigate low-cost conductive materials. In this thesis, common graphite flakes are combined with the lignin derivative lignosulphonate (LS) via a solvent free ball-milling process, followed by treatment with water and resulting in a paste that can be processed into electrodes. Similarly, humic acid derived from peat, lignite that contains a large amount of Q-groups is also fabricated into electrode with graphite via the ball-milling process. In order to further reduce the impact on environment during the extraction of Q-materials from biomass, barks that contain as much as 30% of lignin are directly used for energy storage via co-milling with pristine graphite to generate the biomass/graphite hybrid material electrodes. However, larger weight fraction of Q are required to further improve the electrochemical performance of these electrodes and Q chemicals (QCs) that also originate from biomass are introduced to fabricate the QCs/graphite electrodes with an increased capacity. Additionally, self-discharge mechanism is studied on the LS/graphite hybrid material electrodes, which provides instructions to achieve a low self-discharge rate. Overall, this study has brought us one step forward on the establishing of scalable, sustainable, and cost-effective energy storage systems using aqueous electrolytes.
Download or read book PRICM 6 written by Young Won Chang and published by . This book was released on 2007 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Sustainable Infrastructure Building a Greener Tomorrow written by Nemkumar Banthia and published by Springer Nature. This book was released on with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Advances in Oral and Craniofacial Tissue Engineering written by Vincenzo Guarino and published by CRC Press. This book was released on 2020-11-12 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oral tissue engineering involves the study of current approaches for in vitro regeneration of soft and hard tissues located into the oral cavity. In this context, recent approaches involves the use of innovative biomaterials to replace the lost or damaged human oral tissues. Recent discoveries in materials science and nanotechnology are drastically changing the traditional approach to dentistry by the design of innovative devices able more efficiently supporting the natural regeneration process. The objective of this book is to highlight current progress in tissue engineering for various dental hard/soft tissues including enamel, dentin, pulp, alveolar bone, periodontium, gum and oral mucosa, by emphasizing the role of materials and their specific applications.
Download or read book Hydrogen Energy written by Dragica Minic and published by BoD – Books on Demand. This book was released on 2012-10-17 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen economy represents the future of human civilization. Limited resources of our planet are compelling us to turn to renewable clean energy resources and hydrogen figures prominently as the energy carrier of a future sustainable energy system. There are significant challenges to be overcome in order to make hydrogen viable, in production, storage and power generation, while safety of operation is an ever-present factor that determines success or failure of a proposed solution. Recent developments in all of these aspects are reviewed in this book, along with some latest research in the field of hydrogen energy and use.
Download or read book Fusion Energy Update written by and published by . This book was released on 1986 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biodegradable Green Composites written by Susheel Kalia and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively addresses surface modification of natural fibers to make them more effective, cost-efficient, and environmentally friendly. Topics include the elucidation of important aspects surrounding chemical and green approaches for the surface modification of natural fibers, the use of recycled waste, properties of biodegradable polyesters, methods such as electrospinning, and applications of hybrid composite materials.
Download or read book 31st European Symposium on Computer Aided Process Engineering written by Metin Türkay and published by Elsevier. This book was released on 2021-07-22 with total page 2146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 31st European Symposium on Computer Aided Process Engineering: ESCAPE-31, Volume 50 contains the papers presented at the 31st European Symposium of Computer Aided Process Engineering (ESCAPE) event held in Istanbul, Turkey. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students and consultants in the chemical industries. - Presents findings and discussions from the 31st European Symposium of Computer Aided Process Engineering (ESCAPE) event
Download or read book Bioactive Materials for Disease Diagnosis and Therapy written by Dan Shao and published by Frontiers Media SA. This book was released on 2024-04-16 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: With their advantages of controlled delivery and modular flexibility, biomaterials have fundamentally revolutionized disease diagnosis and therapy. Bioactive nanomaterials are not simple miniaturizations of macroscopic materials. They exhibit unique and intrinsic bioactivities as they readily acquire a precise structure upon interaction with the biological environment. Nowadays, bioactive materials offer great potential in eliciting specific responses and regulations of living tissues for diagnostics, therapeutics, and regenerative medicine. We are optimistic that the increasing innovations and advances in bioactive and biomimetic materials with sophisticated bioactivities and controllable responsiveness will make an important contribution to the next generation of biomaterials and biomedical engineering.
Download or read book 30th European Symposium on Computer Aided Chemical Engineering written by Sauro Pierucci and published by Elsevier. This book was released on 2020-10-23 with total page 2119 pages. Available in PDF, EPUB and Kindle. Book excerpt: 30th European Symposium on Computer Aided Chemical Engineering, Volume 47 contains the papers presented at the 30th European Symposium of Computer Aided Process Engineering (ESCAPE) event held in Milan, Italy, May 24-27, 2020. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. - Presents findings and discussions from the 30th European Symposium of Computer Aided Process Engineering (ESCAPE) event - Offers a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries
Download or read book Journal written by National Cancer Institute (U.S.) and published by . This book was released on 1964 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Aerogels written by Michel A. Aegerter and published by Springer Nature. This book was released on 2023-10-01 with total page 1778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This indispensable handbook provides comprehensive coverage of the current state-of-the-art in inorganic, organic, and composite aerogels – from synthesis and characterization to cutting-edge applications and their potential market impact. Built upon Springer’s successful Aerogels Handbook published in 2011, this handbook features extensive revisions and timely updates, reflecting the changes in this fast-growing field. Aerogels are the lightest solids known to man. Up to 1000 times lighter than glass and with a density only four times that of air, they possess extraordinarily high thermal, electrical, and acoustic insulation properties, and boast numerous entries in Guinness World Records. Originally based on silica, R&D efforts have extended this class of materials to incorporate non-silicate inorganic oxides, natural and synthetic organic polymers, carbon, metal, and ceramic materials. Composite systems involving polymer-crosslinked aerogels and interpenetrating hybrid networks have been developed and exhibit remarkable mechanical strength and flexibility. Even more exotic aerogels based on clays, chalcogenides, phosphides, quantum dots, and biopolymers such as chitosan are opening new applications for the construction, transportation, energy, defense and healthcare industries. Applications in electronics, chemistry, mechanics, engineering, energy production and storage, sensors, medicine, nanotechnology, military and aerospace, oil and gas recovery, thermal insulation, and household uses are being developed. Readers of this fully updated and expanded edition will find an exhaustive source for all aerogel materials known today, their fabrication, upscaling aspects, physical and chemical properties, and the most recent advances towards applications and commercial use. This key reference is essential reading for a combined audience of graduate students, academic researchers, and industry professionals.
Download or read book Journal of the National Cancer Institute written by and published by . This book was released on 1966 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Progress in Lead Free Solder Technology written by Mohd Arif Anuar Mohd Salleh and published by Springer Nature. This book was released on 2022-03-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent research progress in lead (Pb)-free solder technology, focusing on materials development, processing, and performances. It discusses various Pb-free solder materials’ development, encompassing composite solders, transient liquid phase sintering, and alloying. The book also details various Pb-free solder technology processing and performances, including flux modification for soldering, laser soldering, wave soldering, and reflow soldering, while also examining multiple technologies pertaining to the rigid and flexible printed circuit board (PCB). Some chapters explain the materials characterization and modeling techniques using computational fluid dynamics (CFD). This book serves as a valuable reference for researchers, industries, and stakeholders in advanced microelectronic packaging, emerging interconnection technology, and those working on Pb-free solder.
Download or read book Integrated Chemical Processes written by Kai Sundmacher and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to the entire field of integrated chemical processes, covering process design, analysis, operation and control of these processes. Both the editors and authors are internationally recognized experts from different fields in industry and academia, and their contributions describe all aspects of intelligent integrations of chemical reactions and physical unit operations such as heat exchange, separational operations and mechanical unit operations. As a unique feature, the book also introduces new concepts for treating different integration concepts on a generalized basis. Of great value to a broad audience of researchers and engineers from industry and academia.
Download or read book Biopolymers for Biomedical Applications written by Annu and published by John Wiley & Sons. This book was released on 2024-04-10 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers for Biomedical Applications The twenty chapters written by experts in the field of biopolymers and biomedical engineering, provide a complete resource that systematically discusses the most widely used biopolymers and their biomedical applications, and presents all the important research and developments that have occurred in the field. In recent decades, significant progress has been made in polymer science for biomedical applications. The use of biopolymers specifically attracted the focus on the development of therapeutic polymeric systems. The exclusive features of biopolymers, such as biodegradability and biocompatibility make them highly sought after, and major research conducted with them has resulted in various therapeutic systems. However, until now only a few showed a potential to be appropriate for human use. Each chapter covers a single biopolymer, its properties, and biomedical applications. The chapters are arranged systematically, with the most common biopolymers discussed early in the book to give more insight into the field. Further, a specific chapter is dedicated to the application of biopolymers for wound healing. Later, specific chapters are dedicated to the application of bioplastics and biopolymers for the development of medical devices and biosensors, respectively. Additionally, a chapter is dedicated to the application of biopolymers in the field of dentistry, with a special focus on their risk to human health. Keeping in mind recent advanced technologies, a chapter is dedicated solely to the latest progress of biopolymers in 3D and 4D printing for biomedical applications. The final chapter comprehensively explains the future perspectives of biopolymers in the biomedical field. Audience The book is a reference source for scientists, research scholars, chemical and polymer engineers, biologists, biotechnologists, polymer technologists, industrialists, health experts, and policymakers.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
