Download or read book Hybrid L1 Adaptive Control written by Roshni Maiti and published by Springer Nature. This book was released on 2022-03-01 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the designing of hybrid control strategies for practical systems containing time varying uncertainties, disturbances, nonlinearities, unknown parameters, unmodelled dynamics, delays, etc., concurrently. In this book, the advantages of different controllers will be brought together to produce superior control performance for the practical systems. Being aware of the advantages of adaptive controller to tackle unknown constant, time varying uncertainties and time varying disturbances, a variant of adaptive controller, namely L1 adaptive controller, is hybridized with other strategies. In this book, to facilitate optimal parameter setting of the basic L1 adaptive controller, stochastic optimization technique will be hybridized with it. The stability of the optimization technique along with the controller will be guaranteed analytically with the help of spectral radius convergence. The proposed method exhibits satisfactory exploration and exploitation capabilities. Again, this book will throw light on tackling nonlinearities along with uncertainties and disturbances by hybridizing fuzzy logic with L1 adaptive controller. The performances of the designed controllers will be compared with different control methodologies to validate their effectiveness. The overall stability of the nonlinear system with the designed controller will be guaranteed with the help of fuzzy Lyapunov function to retain the zonal behaviour of the system. This fuzzy PDC-L1 adaptive controller is efficient to tackle nonlinearities and at the same time cancels unknown constant, time varying uncertainties and time varying disturbances adequately. This book will also contain four simulation case studies to validate fruitfulness of the designed controllers. To demonstrate the superior control ability of these controllers in tackling practical system, three experimental case studies will also be provided.

Download or read book Adaptive Control Systems written by Chalam and published by Routledge. This book was released on 2017-10-19 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: impossible to access. It has been widely scattered in papers, reports, and proceedings ofsymposia, with different authors employing different symbols and terms. But now thereis a book that covers all aspects of this dynamic topic in a systematic manner.Featuring consistent terminology and compatible notation, and emphasizing unifiedstrategies, Adaptive Control Systems provides a comprehensive, integrated accountof basic concepts, analytical tools, algorithms, and a wide variety of application trendsand techniques.Adaptive Control Systems deals not only with the two principal approachesmodelreference adaptive control and self-tuning regulators-but also considers otheradaptive strategies involving variable structure systems, reduced order schemes, predictivecontrol, fuzzy logic, and more. In addition, it highlights a large number of practical applicationsin a range of fields from electrical to biomedical and aerospace engineering ...and includes coverage of industrial robots.The book identifies current trends in the development of adaptive control systems ...delineates areas for further research . : . and provides an invaluable bibliography of over1,200 references to the literature.The first authoritative reference in this important area of work, Adaptive ControlSystems is an essential information source for electrical and electronics, R&D,chemical, mechanical, aerospace, biomedical, metallurgical, marine, transportation, andpower plant engineers. It is also useful as a text in professional society seminars and inhousetraining programs for personnel involved with the control of complex systems, andfor graduate students engaged in the study of adaptive control systems.

Download or read book Adaptive Control written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2011-06-06 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Control (second edition) shows how a desired level of system performance can be maintained automatically and in real time, even when process or disturbance parameters are unknown and variable. It is a coherent exposition of the many aspects of this field, setting out the problems to be addressed and moving on to solutions, their practical significance and their application. Discrete-time aspects of adaptive control are emphasized to reflect the importance of digital computers in the application of the ideas presented. The second edition is thoroughly revised to throw light on recent developments in theory and applications with new chapters on: multimodel adaptive control with switching, direct and indirect adaptive regulation and adaptive feedforward disturbance compensation. Many algorithms are newly presented in MATLAB® m-file format to facilitate their employment in real systems. Classroom-tested slides for instructors to use in teaching this material are also now provided. All of this supplementary electronic material can be downloaded from fill in URL. The core material is also up-dated and re-edited to keep its perspective in line with modern ideas and more closely to associate algorithms with their applications giving the reader a solid grounding in: synthesis and analysis of parameter adaptation algorithms, recursive plant model identification in open and closed loop, robust digital control for adaptive control; • robust parameter adaptation algorithms, practical considerations and applications, including flexible transmission systems, active vibration control and broadband disturbance rejection and a supplementary introduction on hot dip galvanizing and a phosphate drying furnace. Control researchers and applied mathematicians will find Adaptive Control of significant and enduring interest and its use of example and application will appeal to practitioners working with unknown- and variable-parameter plant. Praise for the first edition: ...well written, interesting and easy to follow, so that it constitutes a valuable addition to the monographies in adaptive control for discrete-time linear systems... suitable (at least in part) for use in graduate courses in adaptive control.

Download or read book Adaptive Systems in Control and Signal Processing 1992 written by L. Dugard and published by Elsevier. This book was released on 2014-06-28 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Systems remain a very interesting field of theoretical research, extended by methodological studies and an increasing number of applications. The plenary papers, invited sessions and contributed sessions focused on many aspects of adaptive systems, such as systems identification and modelling, adaptive control of nonlinear systems and theoretical issues in adaptive control. Also covered were methodological aspects and applications of adaptive control, intelligent tuning and adaptive signal processing.

Download or read book Model Reference Adaptive Control written by Nhan T. Nguyen and published by Springer. This book was released on 2018-03-01 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides readers with a good working knowledge of adaptive control theory through applications. It is intended for students beginning masters or doctoral courses, and control practitioners wishing to get up to speed in the subject expeditiously. Readers are taught a wide variety of adaptive control techniques starting with simple methods and extending step-by-step to more complex ones. Stability proofs are provided for all adaptive control techniques without obfuscating reader understanding with excessive mathematics. The book begins with standard model-reference adaptive control (MRAC) for first-order, second-order, and multi-input, multi-output systems. Treatment of least-squares parameter estimation and its extension to MRAC follow, helping readers to gain a different perspective on MRAC. Function approximation with orthogonal polynomials and neural networks, and MRAC using neural networks are also covered. Robustness issues connected with MRAC are discussed, helping the student to appreciate potential pitfalls of the technique. This appreciation is encouraged by drawing parallels between various aspects of robustness and linear time-invariant systems wherever relevant. Following on from the robustness problems is material covering robust adaptive control including standard methods and detailed exposition of recent advances, in particular, the author’s work on optimal control modification. Interesting properties of the new method are illustrated in the design of adaptive systems to meet stability margins. This method has been successfully flight-tested on research aircraft, one of various flight-control applications detailed towards the end of the book along with a hybrid adaptive flight control architecture that combines direct MRAC with least-squares indirect adaptive control. In addition to the applications, understanding is encouraged by the use of end-of-chapter exercises and associated MATLAB® files. Readers will need no more than the standard mathematics for basic control theory such as differential equations and matrix algebra; the book covers the foundations of MRAC and the necessary mathematical preliminaries.

Download or read book Adaptive Systems in Control and Signal Processing 1989 written by T.S. Durrani and published by Elsevier. This book was released on 2014-06-28 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium covered three major areas: adaptive control, identification and signal processing. In all three, new developments were discussed covering both theoretical and applications research. Within the subject area of adaptive control the discussion centred around the challenges of robust control design to unmodelled dynamics, robust parameter estimation and enhanced performance from the estimator, while the papers on identification took the theme of it being a bridge between adaptive control and signal processing. The final area looked at two aspects of signal processing: recursive estimation and adaptive filters.

Download or read book Adaptive Systems in Control and Signal Processing 1983 written by I. D. Landau and published by Elsevier. This book was released on 2014-06-28 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Systems in Control and Signal Processing 1983 is a compendium of papers presented at the International Federation of Automatic Control in San Francisco on June 20-22, 1983. One paper addresses the results through comparative alternative algorithms in adaptive control of linear time invariant and time varying systems. Another paper presents a method in computer simulation of a wide range of stable plants to achieve an alternative approach in designing an adaptive control system. The book also compares the stability and the sensitivity approach involving the design of model-reference adaptive systems. The authors involved explain that the sensitivity concept determines the "dynamic speed of adaptation," while the stability concept focuses on finding a linear compensator for any deviant signal. One paper proposes an indirect adaptive control algorithm for MIMO square full rank minimum phase systems, while another paper discusses the application of the discrete time multivariable adaptive control system, to non-minimum phase plants with an unknown dead time. This book can prove valuable to engineers and researchers of electrical, computer, and mechanical engineering. It can also be helpful for technicians and students dealing with automatic control and telecontrol.

Download or read book 15th European Workshop on Advanced Control and Diagnosis ACD 2019 written by Elena Zattoni and published by Springer Nature. This book was released on 2022-06-13 with total page 1441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, published in two volumes, embodies the proceedings of the 15th European Workshop on Advanced Control and Diagnosis (ACD 2019) held in Bologna, Italy, in November 2019. It features contributed and invited papers from academics and professionals specializing in an important aspect of control and automation. The book discusses current theoretical research developments and open problems and illustrates practical applications and industrial priorities. With a focus on both theory and applications, it spans a wide variety of up-to-date topics in the field of systems and control, including robust control, adaptive control, fault-tolerant control, control reconfiguration, and model-based diagnosis of linear, nonlinear and hybrid systems. As the subject coverage has expanded to include cyber-physical production systems, industrial internet of things and sustainability issues, some contributions are of an interdisciplinary nature, involving ICT disciplines and environmental sciences. This book is a valuable reference for both academics and professionals in the area of systems and control, with a focus on advanced control, automation, fault diagnosis and condition monitoring.

Download or read book Robust Adaptive Control written by Petros Ioannou and published by Courier Corporation. This book was released on 2013-09-26 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in a tutorial style, this comprehensive treatment unifies, simplifies, and explains most of the techniques for designing and analyzing adaptive control systems. Numerous examples clarify procedures and methods. 1995 edition.

Download or read book Modelling and Simulation in Science Technology and Engineering Mathematics written by Surajit Chattopadhyay and published by Springer. This book was released on 2018-10-24 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the peer-reviewed proceedings of the International Conference on Modelling and Simulation (MS-17), held in Kolkata, India, 4th-5th November 2017, organized by the Association for the Advancement of Modelling and Simulation Techniques in Enterprises (AMSE, France) in association with the Institution of Engineering Technology (IET, UK), Kolkata Network. The contributions contained here showcase some recent advances in modelling and simulation across various aspects of science and technology. This book brings together articles describing applications of modelling and simulation techniques in fields as diverse as physics, mathematics, electrical engineering, industrial electronics, control, automation, power systems, energy and robotics. It includes a special section on mechanical, fuzzy, optical and opto-electronic control of oscillations. It provides a snapshot of the state of the art in modelling and simulation methods and their applications, and will be of interest to researchers and engineering professionals from industry, academia and research organizations.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume II written by Heinz Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume XIV written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs

Download or read book Analysis and Control of Industrial Processes written by Dobrivoje Popović and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of a 2-days Workshop on Automation Engineering held in Salzhausen (near Hamburg), F.R. Germany. The Workshop is annually organ ized by the Institute of Automation Technology and the Institute of Applied and Physical Chemistry of the University of Bremen. It is regularly joined by 30 to 40 participants representing the teaching and reserarch staff of both Institutes, as weIl as some invited colleagues from other universities and the regional industry. Usually 15/20 selected contributions, grouped in technical sessions (system modelling and identification, control systems design, computer hardware and soft ware, knowledge-based systems, robotics etc.), are presented at the Workshop, whereby the invited guests preferably present survey papers on current problems of modern systems engineering. For this book, 22 papers, contributed to the last two Workshops, are selected and grouped into 6 Chapters. The Chapters reflect the technical sessions listed above and give an average view on current research activities at both Institutes of the University. It is expected that the book will prove as a useful reference to the scientists and practicing engineers in the area of devel opment and application of methods of modern systems engineering in processing industry and the robotics.

Download or read book Nonlinear and Adaptive Control with Applications written by Alessandro Astolfi and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors here provide a detailed treatment of the design of robust adaptive controllers for nonlinear systems with uncertainties. They employ a new tool based on the ideas of system immersion and manifold invariance. New algorithms are delivered for the construction of robust asymptotically-stabilizing and adaptive control laws for nonlinear systems. The methods proposed lead to modular schemes that are easier to tune than their counterparts obtained from Lyapunov redesign.

Download or read book Control Systems Robotics and AutomatioN Volume XII written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Soft Computing for Hybrid Intelligent Systems written by Oscar Castillo and published by Springer Science & Business Media. This book was released on 2008-08-25 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: We describe in this book, new methods and applications of hybrid intelligent systems using soft computing techniques. Soft Computing (SC) consists of several intelligent computing paradigms, including fuzzy logic, neural networks, and evolutionary al- rithms, which can be used to produce powerful hybrid intelligent systems. The book is organized in five main parts, which contain a group of papers around a similar subject. The first part consists of papers with the main theme of intelligent control, which are basically papers that use hybrid systems to solve particular problems of control. The second part contains papers with the main theme of pattern recognition, which are basically papers using soft computing techniques for achieving pattern recognition in different applications. The third part contains papers with the themes of intelligent agents and social systems, which are papers that apply the ideas of agents and social behavior to solve real-world problems. The fourth part contains papers that deal with the hardware implementation of intelligent systems for solving particular problems. The fifth part contains papers that deal with modeling, simulation and optimization for real-world applications.

Download or read book Intelligent Adaptive Control written by Lakhmi C. Jain and published by CRC Press. This book was released on 1998-12-29 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes important techniques, developments, and applications of computational intelligence in system control. Chapters present: an introduction to the fundamentals of neural networks, fuzzy logic, and evolutionary computing a rigorous treatment of intelligent control industrial applications of intelligent control and soft computing, including transportation, petroleum, motor drive, industrial automation, and fish processing other knowledge-based techniques, including vehicle driving aid and air traffic management Intelligent Adaptive Control provides a state-of-the-art treatment of practical applications of computational intelligence in system control. The book cohesively covers introductory and advanced theory, design, implementation, and industrial use - serving as a singular resource for the theory and application of intelligent control, particularly employing fuzzy logic, neural networks, and evolutionary computing.