Download or read book Humidity Studies written by Francis D. Horigan and published by . This book was released on 1951 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book World wide Extremes of Humidity with Temperatures Between 85 Degress and 120 Degress F written by René V. Cormier and published by . This book was released on 1974 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of certain Air Force systems intended for world-wide usage requires knowledge of the possible joint extremes of high temperatures with high humidity. Previous studies have addressed themselves to this problem, but the statistics reported therein were not presented in terms of joint occurrence frequencies. This study presents joint values of temperature (to 120F) and dew point (to 93F) equalled or exceeded from 0.1 to 80% of the time (hours) in the world's severest joint high-temperature, high-humidity environment (Abadan, Iran). These values are compared with the joint high-temperature, high-humidity criteria presented in Military Specification MIL-E-38453A. This comparison indicates that the use of MIL-E-38453A can lead to overdesign at temperatures above 120F and to underdesign at lower temperatures.
Download or read book Humidity and Moisture Fundamentals and standards A Wexler and W A Wildhack editors written by Arnold Wexler and published by . This book was released on 1965 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Humidity and Electronics written by Rajan Ambat and published by Woodhead Publishing. This book was released on 2021-11-30 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humidity and Electronics: Corrosion Reliability Issues and Preventive Measures provides comprehensive information on humidity related corrosion reliability issues surrounding electronics and how to tackle potential issues from a pro-active-design-prevention perspective. The book contains a mix of academic and industrial relevance, making it suitable for a detailed understanding on humidity issues on electronics, both for materials and corrosion experts and electronics and electrical experts. It will be useful for researchers, academics, and industrial personals involved in materials, corrosion, and electronics reliability aspects. Provides basic and applied knowledge surrounding corrosion in electronics Combines electronics/electrical and electrochemical aspects related to failure modes and mechanisms Presents knowledge on influencing factors and how they can be used as preventive measures at the material, component, device and system level
Download or read book Industrial Moisture and Humidity Measurement written by Roland Wernecke and published by John Wiley & Sons. This book was released on 2013-12-18 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moisture analysis covers a variety of methods for measuring high levels of moisture, as well as trace amounts, in solids, liquids, or gases. There are many applications where trace moisture measurements are indispensable for manufacturing and for process quality assurance. Trace moisture in solids must be controlled for plastics, pharmaceuticals and heat treatment processes. Measurement applications in gases and liquids include, for example, drying processes, hydrocarbon processing, pure gases in the semiconductor industry, natural gas pipeline transport, the conditioning of food and other products. Written by experts with over 20 years of experience in the field, this one-stop guide covers all aspects of these measurements, including both the theory and a wealth of practical know-how. As such, it includes guidelines on installation, on the realization of standards for absolute and relative humidity, verification and traceability measurements, equipment calibration methods and the latest research developments. Backed by numerous case studies, this practical book serves the needs of those working in the industry tasked with performing or developing new techniques and processes for moisture and humidity measurement. As a result, the scientist or engineer has all the information required for accurate, reliable, economically viable and efficient moisture measurement.
Download or read book Research in Home Humidity Control written by S. C. Hite and published by . This book was released on 2013-02 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress Report Of Work Completed Through June 30, 1948, Purdue Research Foundation Fellowship, No. 299a, American Gas Association Research Project DGR-8-C. Purdue University, V32, No. 6, November, 1948.
Download or read book Handbook of Humidity Measurement Volume 3 written by Ghenadii Korotcenkov and published by CRC Press. This book was released on 2020-01-24 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of unique water properties, humidity affects materials and many living organisms, including humans. Humidity control is important in various fields, from production management to creating a comfortable living environment. The range of materials that can be used in the development of humidity sensors is very broad, and the third volume of the Handbook of Humidity Measurement offers an analysis on various humidity-sensitive materials and sensor technologies used in the fabrication of humidity sensors and methods acceptable for their testing. Additional features include: numerous strategies for the fabrication and characterization of humidity-sensitive materials and sensing structures used in sensor applications, methods and properties to develop smaller, cheaper, more robust, and accurate devices with better sensitivity and stability, a guide to sensor selection and an overview of the humidity sensor market, and new technology solutions for integration, miniaturization, and specificity of the humidity sensor calibration. Handbook of Humidity Measurement, Volume 3: Sensing Materials and Technologies provides valuable information for practicing engineers, measurement experts, laboratory technicians, project managers in industries and national laboratories, and university students and professors interested in solutions to humidity measurement tasks. Despite the fact that this book is devoted to the humidity sensors, it can be used as a basis for understanding fundamentals of any gas sensor operation and development.
Download or read book Human Thermal Environments written by Ken Parsons and published by CRC Press. This book was released on 2007-03-22 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our responses to our thermal environment have a considerable effect on our performance and behavior, not least in the realm of work. There has been considerable scientific investigation of these responses and formal methods have been developed for environmental evaluation and design. In recent years these have been developed to the extent that detailed national and international standards of practice have now become feasible. This new edition of Ken Parson's definitive text brings us back up to date. He covers hot, moderate and cold environments, and defines these in terms of six basic parameters: air temperature, radiate temperature, humidity, air velocity, clothing worn, and the person's activity. There is a focus on the principles and practice of human response, which incorporates psychology, physiology and environmental physics with applied ergonomics. Water requirements, computer modeling and computer-aided design are brought in, as are current standards. Special populations, such as the aged or disabled and specialist environments such as those found in vehicles are also considered. This book continues to be the standard text for the design of environments for humans to live and work safely, comfortably and effectively, and for the design of materials which help the same people cope with their environments.
Download or read book Humidity Sensors written by Peter W. McCarthy and published by MDPI. This book was released on 2019-07-01 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Tsinghua University–University of Waterloo Joint Research Center for Micro/Nano Energy & Environment Technology (JCMEET) is a platform. It was established on Nov.11, 2017. The Chairperson of University Council of Tsinghua University, Dr. Xu Chen, and the President of the University of Waterloo, Dr. Feridun Hamdullahpur, attended the opening ceremony and unveiled the nameplate for the joint research center on 29th of March, 2018. The research center serves as a platform for researchers at both universities to conduct joint research in the targeted areas, and to meet regularly for information exchange, talent exchange, and knowledge mobilization, especially in the fields of micro/nano, energy, and environmental technologies. The center focuses on three main interests: micro/nano energy technology, micro/nano pollution control technology, and relevant fundamental research. In order to celebrate the first anniversary of the Joint Research Center, we were invited to serve as the Guest Editors of this Special Issue of Materials focusing on the topic of micro/nano-materials for clean energy and environment. It collects research papers from a broad range of topics related to micro/nanostructured materials aimed at future energy resources, low emission energy conversion, energy storage, energy efficiency improvement, air emission control, air monitoring, air cleaning, and many other related applications. This Special Issue provides an opportunity and example for the international community to discuss how to actively address the energy and environment issues that we are facing.
Download or read book Damp Indoor Spaces and Health written by Institute of Medicine and published by National Academies Press. This book was released on 2004-10-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost all homes, apartments, and commercial buildings will experience leaks, flooding, or other forms of excessive indoor dampness at some point. Not only is excessive dampness a health problem by itself, it also contributes to several other potentially problematic types of situations. Molds and other microbial agents favor damp indoor environments, and excess moisture may initiate the release of chemical emissions from damaged building materials and furnishings. This new book from the Institute of Medicine examines the health impact of exposures resulting from damp indoor environments and offers recommendations for public health interventions. Damp Indoor Spaces and Health covers a broad range of topics. The book not only examines the relationship between damp or moldy indoor environments and adverse health outcomes but also discusses how and where buildings get wet, how dampness influences microbial growth and chemical emissions, ways to prevent and remediate dampness, and elements of a public health response to the issues. A comprehensive literature review finds sufficient evidence of an association between damp indoor environments and some upper respiratory tract symptoms, coughing, wheezing, and asthma symptoms in sensitized persons. This important book will be of interest to a wide-ranging audience of science, health, engineering, and building professionals, government officials, and members of the public.
Download or read book Handbook of Humidity Measurement Volume 2 written by Ghenadii Korotcenkov and published by CRC Press. This book was released on 2019-01-25 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of unique water properties, humidity affects many living organisms, including humans and materials. Humidity control is important in various fields, from production management to creating a comfortable living environment. The second volume of The Handbook of Humidity Measurement is entirely devoted to the consideration of different types of solid-state devices developed for humidity measurement. This volume discusses the advantages and disadvantages about the capacitive, resistive, gravimetric, hygrometric, field ionization, microwave, Schottky barrier, Kelvin probe, field-effect transistor, solid-state electrochemical, and thermal conductivity-based humidity sensors. Additional features include: Provides a comprehensive analysis of the properties of humidity-sensitive materials, used for the development of such devices. Describes numerous strategies for the fabrication and characterization of humidity sensitive materials and sensing structures used in sensor applications. Explores new approaches proposed for the development of humidity sensors. Considers conventional devices such as phsychometers, gravimetric, mechanical (hair), electrolytic, child mirror hygrometers, etc., which were used for the measurement of humidity for several centuries. Handbook of Humidity Measurement, Volume 2: Electronic and Electrical Humidity Sensors provides valuable information for practicing engineers, measurement experts, laboratory technicians, project managers in industries and national laboratories, as well as university students and professors interested in solutions to humidity measurement tasks as well as in understanding fundamentals of any gas sensor operation and development.
Download or read book Science written by John Michels (Journalist) and published by . This book was released on 1902 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Moisture Control Handbook written by Joseph Lstiburek and published by John Wiley & Sons. This book was released on 1996-01-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the climate-controlled buildings of today, moisture problemsaffect not only the useable life expectancy of the structure, butthe comfort and health of the occupants. This reference is thefirst to apply up-to-date moisture control and treatment techniquesin a problem/solution format. Opening with an introductoryexplanation of the nature and causes of mold, mildew, andcondensation, the book gives specific advice on heated, cooled, andcombination environments, plus a short course in the dynamics ofmoisture movement within buildings. Other invaluable coverageincludes: * clear, detailed recommended practices for all United Statesclimates * practices for cooling as well as heating climates (often, heatingclimate solutions are applied in cooling climates, where problemsand solutions are completely different) * an overall, systematic view of moisture problems--including howmechanical systems and occupant lifestyles can create and alsoresolve moisture problems * actual case studies of buildings with moisture problems thatillustrate the principles and practices presented in the book This detailed, no-nonsense exploration of moisture cause andeffect--as well as its protection and remediation--will expandreaders' knowledge on this crucial subject. Moisture ControlHandbook will be welcomed by building contractors, architects,mechanical engineers, building science researchers, buildingproduct manufacturers, homeowners, and small commercial buildingowners.
Download or read book Humidity Studies written by Amy Cooke Ambrose and published by . This book was released on 1930 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book California Citrograph written by and published by . This book was released on 1919 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Weather Studies written by L. P. Smith and published by Elsevier. This book was released on 2013-10-22 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weather Studies presents thorough discussions on various aspects of weather and weather studies. This text first presents the methods of measuring the weather, including measuring the temperature, humidity, rainfall, snowfall, visibility, wind force and direction, and pressure. Then, this book explains how to put these measurements in graphs to better present the data. This topic is followed by discussions on “weather in pairs, or the relationships of weather measurements, such as of temperature and pressure, wind, and humidity, as well as of visibility and wind direction and humidity. This book ends by discussing local weather and forecasting the weather. This selection will be very invaluable to those studying the weather, including weather researchers, meteorologists, and students of meteorology.
Download or read book Experimental Agrometeorology A Practical Manual written by Latief Ahmad and published by Springer. This book was released on 2017-12-05 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a practical manual which has been created to support the syllabus of agro-meteorology courses specifically designed for graduate and post-graduate students. The topics covered in the manual include working with meteorological instruments for measurement of various meteorological parameters like temperature, humidity, sunshine hours, precipitation, etc. Separate chapters have been included for computation of growing degree days, agro-climatic zones, crop modelling and agro-advisory services. The book will have great appeal to students of agriculture, horticulture, and forestry.
