Download or read book Human Error in Process Plant Design and Operations written by J. Robert Taylor and published by CRC Press. This book was released on 2016-01-05 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to nuclear plants and aerospace systems, human error is largely ignored in quantitative risk assessment for petroleum and chemical plants. Because of this, current risk analysis methods are able to calculate and predict only about one-third of the accidents happening in practice. Human Error in Process Plant Design and Operations: A Pra
Download or read book Guidelines for Preventing Human Error in Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost all the major accident investigations--Texas City, Piper Alpha, the Phillips 66 explosion, Feyzin, Mexico City--show human error as the principal cause, either in design, operations, maintenance, or the management of safety. This book provides practical advice that can substantially reduce human error at all levels. In eight chapters--packed with case studies and examples of simple and advanced techniques for new and existing systems--the book challenges the assumption that human error is "unavoidable." Instead, it suggests a systems perspective. This view sees error as a consequence of a mismatch between human capabilities and demands and inappropriate organizational culture. This makes error a manageable factor and, therefore, avoidable.
Download or read book Plant Design and Operations written by Ian Sutton and published by William Andrew. This book was released on 2014-10-06 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Design and Operations provides practical guidance on the design, operation, and maintenance of process facilities. The book is based on years of hands-on experience gathered during the design and operation of a wide range of facilities in many different types of industry including chemicals, refining, offshore oil and gas, and pipelines. The book helps managers, engineers, operators, and maintenance specialists with advice and guidance that can be used right away in working situations. Each chapter provides information and guidance that can be used immediately. For example, the chapter on Energy Control Procedures describes seven levels of positive isolation — ranging from a closed block valve all the way to double block and bleed with line break. The Safety in Design chapter describes topics such as area classification, fire protection, stairways and platforms, fixed ladders, emergency showers, lighting, and alarms. Other areas covered in detail by the book include security, equipment, and transportation. A logical, practical guide to maintenance task organization is provided, from conducting a Job Hazards Analysis to the issue of a work permit, and to the shutdown and isolation of equipment. Common hazards are covered in detail, including flow problems, high pressure, corrosion, power failure, and many more. - Provides information to managers, engineers, operators and maintenance personnel which is immediately applicable to their operations - Supported by useful, real-world examples and experience from a wide range of facilities and industries - Includes guidance on occupational health and safety, industrial hygiene and personal protective equipment
Download or read book Design Error written by Ronald William Day and published by CRC Press. This book was released on 2016-09-19 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how to identify potential design errors and modify procedures in the design process to mitigate design-induced error. Real life examples are used to demonstrate the points being made. Many of the concerns raised in the book have come from a worldwide study conducted with designers, managers, and end-users.
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Bow Tie Industrial Risk Management Across Sectors written by Luca Fiorentini and published by John Wiley & Sons. This book was released on 2021-05-19 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: BOW-TIE INDUSTRIAL RISK MANAGEMENT ACROSS SECTORS Explore an approachable but rigorous treatment of systematic barrier-based approaches to risk management and failure analysis In Bow-Tie Industrial Risk Management Across Sectors: A Barrier-Based Approach, accomplished researcher and author Luca Fiorentini delivers a practical guide to risk management tools, with a particular emphasis on a systematic barrier-based approach called “bow-tie.” The book includes discussions of two barrier-based methods, Bow-Tie and Layers of Protection Analysis (LOPA), for risk assessment, and one barrier-based method for incident analysis, Barrier Failure Analysis (BFA). The author also describes a traditional method–Root Cause Analysis–and three quantitative methods–FMEA/FMECA, Fault Tree (FTA), and Event Tree (ETA) with a discussion about their link with barriers. Written from the ground up to be in full compliance with recent ISO 31000 standards on enterprise risk management, and containing several case studies and examples from a variety of industries, Bow-Tie Industrial Risk Management Across Sectors also contains discussions of international standards dealing with common risks faced by organizations, including occupational health and safety, industrial safety, functional safety, environmental, quality, business continuity, asset integrity, and information security. Readers will also benefit from the inclusion of: A thorough introduction to the Bow-Tie method, including its practical application in risk management workflow from ISO 31000, the history of Bow-Tie, related methods, and the application of Bow-Tie in qualitative and quantitative ways An exploration of Barrier Failure Analysis, including events, timelines, barriers, causation paths, and multi-level causes A practical discussion of how to build a Barrier Failure Analysis, including fact finding, event chaining, identifying barriers, assessing barrier states, causation analysis, and recommendations A concise treatment of Bow-Tie construction workflow, including a step-by-step guide Perfect for engineers and other professionals working in risk management, Bow-Tie Industrial Risk Management Across Sectors: A Barrier-Based Approach will also earn a place in the libraries of advanced undergraduate and graduate students studying risk management and seeking a one-stop reference on the “bow-tie” approach and barrier-based methods.
Download or read book Human Factors Handbook for Process Plant Operations written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2022-03-25 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human Factors Handbook for Process Plant Operations Provides clear and simple instructions for integrating Human Factors principles and practices in the design of processes and work tasks Human Factors, the science of interaction between humans and other elements of a system, draws from disciplines such as psychology, ergonomics, anthropometrics, and physiology to understand how and why people behave and perform as they do—and how best to support them in performing tasks. The goals of the Human Factors approach are to improve human reliability, minimize the risk from human error, and optimize the working environment, human wellbeing, and overall system performance. Human Factors Handbook for Process Plant Operations guides supervisors, managers, and engineers on incorporating Human Factors principles and practices into plant maintenance and operations. With thorough and accessible coverage of all Human Factors topics of relevance to process industries, this easy-to-use handbook uses real-world anecdotes and case studies to demonstrate effective training and learning, task planning, communications, emergency response, risk and error management, and more. Throughout the text, the authors offer valuable insights into why people make mistakes while providing advice on how to help workers perform their process operational tasks successfully. Explains all essential Human Factors concepts and knowledge with clear descriptions and illustrative examples Offers actionable advice and models of good practice that can be applied to design, process operations, start-ups and shut-downs, and maintenance Addresses job aids, equipment design, competence, task support, non-technical skills, working with contractors, and managing change Discusses how lack of Human Factors considerations during the engineering design phase can adversely affect safety and performance Describes how to use indicators to both recognize and learn from human error and performance issues Written by highly experienced operating and maintenance personnel, Human Factors Handbook for Process Plant Operations is an indispensable resource for everyone involved with defining, planning, training, and managing process operations, maintenance, and emergency response in the food, pharmaceutical, chemical, petroleum, and refining industries. The missions of both the CCPS and EI include developing and disseminating knowledge, skills and good practices to protect people, the environment, and property by bringing the best knowledge and practices to industry, academia, governments and the public around the world through collective wisdom, tools, training and expertise. The CCPS, an industrial technology alliance of the American Institute of Chemical Engineers (AIChE), has been at the forefront of documenting and sharing important process safety risk assessment methodologies for more than 35 years and has published over 100 books in its process safety guidelines and process safety concept book series. The EI’s Technical Work Program addresses the depth and breadth of the energy sector from fuels and fuels distribution to health and safety, sustainability and the environment. The EI program provides cost-effective, value-adding knowledge on key current and future international issues affecting those in the energy sector.
Download or read book The Field Guide to Human Error Investigations written by Sidney Dekker and published by Routledge. This book was released on 2017-11-01 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title was first published in 2002: This field guide assesses two views of human error - the old view, in which human error becomes the cause of an incident or accident, or the new view, in which human error is merely a symptom of deeper trouble within the system. The two parts of this guide concentrate on each view, leading towards an appreciation of the new view, in which human error is the starting point of an investigation, rather than its conclusion. The second part of this guide focuses on the circumstances which unfold around people, which causes their assessments and actions to change accordingly. It shows how to "reverse engineer" human error, which, like any other componant, needs to be put back together in a mishap investigation.
Download or read book Human Factors Methods for Improving Performance in the Process Industries written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2007-02-03 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human Factors Methods for Improving Performance in the Process Industries provides guidance for managers and plant engineering staff on specific, practical techniques and tools for addressing forty different human factors issues impacting process safety. Human factors incidents can result in injury and death, damage to the environment, fines, and business losses due to ruined batches, off-spec products, unplanned shutdowns, and other adverse effects. Prevention of these incidents increases productivity and profits. Complete with examples, case histories, techniques, and implementation methodologies, Human Factors Methods for Improving Performance in the Process Industries helps managers and engineering staff design and execute an efficient program. Organized for topical reference, the book includes: An overview on implementing a human factors program at the corporate level or the plant level, covering the business value, developing a program to meet specific needs, improving existing systems, roles and responsibilities, measures of performance, and more Summaries of forty different human factors relating to process safety, with a description of the tools, a practical example with graphics and visual aids, and additional resources Information on addressing the OSHA Process Safety Management (PSM) requirement for conducting human factors reviews in process hazard analyses (PHAs) A CD-ROM with a color version of the book Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Download or read book Human Factors for Naval Marine Vehicle Design and Operation written by Jonathan M. Ross and published by CRC Press. This book was released on 2017-03-02 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a driving need for naval professionals to focus on human factors issues. The number of maritime accidents is increasing and the chief cause is human error, both by the designer and the operator. Decreasing crew size, lack of experienced operators, operations in higher sea states and fatigue worsen the situation. Automation can be a partial solution, but flawed automated systems actually contribute to accidents at sea. Up to now, there has been no overarching resource available to naval marine vehicle designers and human factors professionals which bridges the gap between the human and the machine in this context. Designers understand the marine vehicle; human factors professionals understand how a particular environment affects people. Yet neither has a practical understanding of the other's field, and thus communicating requirements and solutions is difficult. This book integrates knowledge from numerous sources as well as the advice of a panel of eight recognized experts in the fields of related research, development and operation. The result is a reference that bridges the communications gap, and stands to help enhance the design and operation of all naval marine vehicles.
Download or read book Human Factors in Simple and Complex Systems written by Robert W. Proctor and published by CRC Press. This book was released on 2018-01-02 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, there have been a number of advances in technology, including in mobile devices, globalization of companies, display technologies and healthcare, all of which require significant input and evaluation from human factors specialists. Accordingly, this textbook has been completely updated, with some chapters folded into other chapters and new chapters added where needed. The text continues to fill the need for a textbook that bridges the gap between the conceptual and empirical foundations of the field.
Download or read book Plant Hazard Analysis and Safety Instrumentation Systems written by Swapan Basu and published by Academic Press. This book was released on 2016-10-21 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Hazard Analysis and Safety Instrumentation Systems is the first book to combine coverage of these two integral aspects of running a chemical processing plant. It helps engineers from various disciplines learn how various analysis techniques, international standards, and instrumentation and controls provide layers of protection for basic process control systems, and how, as a result, overall system reliability, availability, dependability, and maintainability can be increased. This step-by-step guide takes readers through the development of safety instrumented systems, also including discussions on cost impact, basics of statistics, and reliability. Swapan Basu brings more than 35 years of industrial experience to this book, using practical examples to demonstrate concepts. Basu links between the SIS requirements and process hazard analysis in order to complete SIS lifecycle implementation and covers safety analysis and realization in control systems, with up-to-date descriptions of modern concepts, such as SIL, SIS, and Fault Tolerance to name a few. In addition, the book addresses security issues that are particularly important for the programmable systems in modern plants, and discusses, at length, hazardous atmospheres and their impact on electrical enclosures and the use of IS circuits. - Helps the reader identify which hazard analysis method is the most appropriate (covers ALARP, HAZOP, FMEA, LOPA) - Provides tactics on how to implement standards, such as IEC 61508/61511 and ANSI/ISA 84 - Presents information on how to conduct safety analysis and realization in control systems and safety instrumentation
Download or read book Behind Human Error written by David Woods and published by CRC Press. This book was released on 2017-09-18 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human error is cited over and over as a cause of incidents and accidents. The result is a widespread perception of a 'human error problem', and solutions are thought to lie in changing the people or their role in the system. For example, we should reduce the human role with more automation, or regiment human behavior by stricter monitoring, rules or procedures. But in practice, things have proved not to be this simple. The label 'human error' is prejudicial and hides much more than it reveals about how a system functions or malfunctions. This book takes you behind the human error label. Divided into five parts, it begins by summarising the most significant research results. Part 2 explores how systems thinking has radically changed our understanding of how accidents occur. Part 3 explains the role of cognitive system factors - bringing knowledge to bear, changing mindset as situations and priorities change, and managing goal conflicts - in operating safely at the sharp end of systems. Part 4 studies how the clumsy use of computer technology can increase the potential for erroneous actions and assessments in many different fields of practice. And Part 5 tells how the hindsight bias always enters into attributions of error, so that what we label human error actually is the result of a social and psychological judgment process by stakeholders in the system in question to focus on only a facet of a set of interacting contributors. If you think you have a human error problem, recognize that the label itself is no explanation and no guide to countermeasures. The potential for constructive change, for progress on safety, lies behind the human error label.
Download or read book Safety Reliability Human Factors and Human Error in Nuclear Power Plants written by B.S. Dhillon and published by CRC Press. This book was released on 2017-12-14 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each year billions of dollars are being spent in the area of nuclear power generation to design, construct, manufacture, operate, and maintain various types of systems around the globe. Many times these systems fail due to safety, reliability, human factors, and human error related problems. The main objective of this book is to combine nuclear power plant safety, reliability, human factors, and human error into a single volume for those individuals that work closely during the nuclear power plant design phase, as well as other phases, thus eliminating the need to consult many different and diverse sources in obtaining the desired information.
Download or read book Hazard Analysis Techniques for System Safety written by Clifton A. Ericson, II and published by John Wiley & Sons. This book was released on 2015-07-20 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains in detail how to perform the most commonly used hazard analysis techniques with numerous examples of practical applications Includes new chapters on Concepts of Hazard Recognition, Environmental Hazard Analysis, Process Hazard Analysis, Test Hazard Analysis, and Job Hazard Analysis Updated text covers introduction, theory, and detailed description of many different hazard analysis techniques and explains in detail how to perform them as well as when and why to use each technique Describes the components of a hazard and how to recognize them during an analysis Contains detailed examples that apply the methodology to everyday problems
Download or read book International Encyclopedia of Ergonomics and Human Factors 3 Volume Set written by Informa Healthcare and published by CRC Press. This book was released on 2000-12-14 with total page 1980 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first encyclopedia in the field, the International Encyclopedia of Ergonomics and Human Factors provides a comprehensive and authoritative compendium of current knowledge on ergonomics and human factors. It gives specific information on concepts and tools unique to ergonomics. About 500 entries, published in three volumes and on CD-ROM, are pre
