Download or read book Advanced Finite Element Contact Benchmarks written by A. W. A. Konter and published by . This book was released on 2006 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Contact Problems in Elasticity written by N. Kikuchi and published by SIAM. This book was released on 1988-01-01 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contact of one deformable body with another lies at the heart of almost every mechanical structure. Here, in a comprehensive treatment, two of the field's leading researchers present a systematic approach to contact problems. Using variational formulations, Kikuchi and Oden derive a multitude of new results, both for classical problems and for nonlinear problems involving large deflections and buckling of thin plates with unilateral supports, dry friction with nonclassical laws, large elastic and elastoplastic deformations with frictional contact, dynamic contacts with dynamic frictional effects, and rolling contacts. This method exposes properties of solutions obscured by classical methods, and it provides a basis for the development of powerful numerical schemes. Among the novel results presented here are algorithms for contact problems with nonlinear and nonlocal friction, and very effective algorithms for solving problems involving the large elastic deformation of hyperelastic bodies with general contact conditions. Includes detailed discussion of numerical methods for nonlinear materials with unilateral contact and friction, with examples of metalforming simulations. Also presents algorithms for the finite deformation rolling contact problem, along with a discussion of numerical examples.

Download or read book Introduction to Hydrocodes written by Jonas Zukas and published by Elsevier. This book was released on 2004-01-20 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hydrocode refers to a computer program used for the study of the dynamic response of materials and structures to impulse (primary blast), impact (involving everything from car and aircraft collisions to impacts of space structures by assorted debris). The understanding of hydrocodes requires knowledge of numerical methods in the code as well as a keen understanding of the physics of the problem being addressed. This can take many years to learn via codes. There are currently a number of titles addressing the physics of high pressure and high rate material but nothing introducing the novice to the fundamentals of this highly technical and complicated study. Introduction to Hydrocodes bridges the gap, bringing together the large body of literature, scattered through diverse journals, government and corporate reports and conference proceedings. As valuable as the text are the cited references and the combination will take years off the preparation time of future code users. - Introduces complex physics essential for the understanding of hydrocodes - Infused with over 30 years practical experience in the field - Brings together a wide range of literature saving valuable research time

Download or read book Practical Finite Element Analysis written by Nitin S. Gokhale and published by FINITE TO INFINITE. This book was released on 2008 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights of the book: Discussion about all the fields of Computer Aided Engineering, Finite Element Analysis Sharing of worldwide experience by more than 10 working professionals Emphasis on Practical usuage and minimum mathematics Simple language, more than 1000 colour images International quality printing on specially imported paper Why this book has been written ... FEA is gaining popularity day by day & is a sought after dream career for mechanical engineers. Enthusiastic engineers and managers who want to refresh or update the knowledge on FEA are encountered with volume of published books. Often professionals realize that they are not in touch with theoretical concepts as being pre-requisite and find it too mathematical and Hi-Fi. Many a times these books just end up being decoration in their book shelves ... All the authors of this book are from IIT€™s & IISc and after joining the industry realized gap between university education and the practical FEA. Over the years they learned it via interaction with experts from international community, sharing experience with each other and hard route of trial & error method. The basic aim of this book is to share the knowledge & practices used in the industry with experienced and in particular beginners so as to reduce the learning curve & avoid reinvention of the cycle. Emphasis is on simple language, practical usage, minimum mathematics & no pre-requisites. All basic concepts of engineering are included as & where it is required. It is hoped that this book would be helpful to beginners, experienced users, managers, group leaders and as additional reading material for university courses.

Download or read book Contact mechanics perspective of tribology written by Irina Goryacheva and published by Frontiers Media SA. This book was released on 2021-06-04 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Methods in Contact Mechanics written by Vladislav A. Yastrebov and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational contact mechanics is a broad topic which brings together algorithmic, geometrical, optimization and numerical aspects for a robust, fast and accurate treatment of contact problems. This book covers all the basic ingredients of contact and computational contact mechanics: from efficient contact detection algorithms and classical optimization methods to new developments in contact kinematics and resolution schemes for both sequential and parallel computer architectures. The book is self-contained and intended for people working on the implementation and improvement of contact algorithms in a finite element software. Using a new tensor algebra, the authors introduce some original notions in contact kinematics and extend the classical formulation of contact elements. Some classical and new resolution methods for contact problems and associated ready-to-implement expressions are provided. Contents: 1. Introduction to Computational Contact. 2. Geometry in Contact Mechanics. 3. Contact Detection. 4. Formulation of Contact Problems. 5. Numerical Procedures. 6. Numerical Examples. About the Authors Vladislav A. Yastrebov is a postdoctoral-fellow in Computational Solid Mechanics at MINES ParisTech in France. His work in computational contact mechanics was recognized by the CSMA award and by the Prix Paul Caseau of the French Academy of Technology and Electricité de France.

Download or read book Handbook of Friction Vibration Interactions written by Gang Sheng Chen and published by Woodhead Publishing. This book was released on 2017-11-13 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-vibration interactions are common but important phenomena in science and engineering. "Handbook of Friction-Vibration Interactions" introduces the principles and provides the resources to understand and work with them. A unified theoretical framework includes some of the most important engineering applications. The first three chapters in the book introduce basic concepts and analytical methods of friction and vibration. The fourth chapter presents the general principles on friction-vibration interactions, and also touches on various engineering applications. In the fifth chapter the concepts and methods are extended to some of the most critical engineering applications in high-tech industry, presenting the friction-vibration interaction principle and applications in data storage systems. Covers a key topic in science and engineering, with applications in daily lifeIntroduces the principles of friction-vibration interactionsAnalyzes, presents experiments, and treats real systems ranging from nano to micro to macro scales

Download or read book Contact Mechanics and Friction written by Valentin L. Popov and published by Springer. This book was released on 2018-07-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This application-oriented book introduces readers to the associations and relationships between contact mechanics and friction, providing them with a deeper understanding of tribology. It addresses the related phenomena of contacts, adhesion, capillary forces, friction, lubrication, and wear from a consistent point of view. The author presents (1) methods for rough estimates of tribological quantities, (2) simple and general methods for analytical calculations, and (3) the crossover into numerical simulation methods, the goal being to convey a consistent view of tribological processes at various scales of magnitude (from nanotribology to earthquake research). The book also explores the system dynamic aspects of tribological systems, such as squeal and its suppression, as well as other types of instabilities and spatial patterns. It includes problems and worked-out solutions for the respective chapters, giving readers ample opportunity to apply the theory to practical situations and to deepen their understanding of the material discussed. The second edition has been extended with a more detailed exposition of elastohydrodynamic lubrication, an updated chapter on numerical simulation methods in contact mechanics, a new section on fretting in the chapter on wear, as well as numerous new exercises and examples, which help to make the book an excellent reference guide.

Download or read book Mechanical and Aerospace Engineering V written by Dashnor Hoxha and published by Trans Tech Publications Ltd. This book was released on 2014-08-28 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2014 5th International Conference on Mechanical and Aerospace Engineering (ICMAE 2014), July 18-19, 2014, Madrid, Spain

Download or read book Method of Dimensionality Reduction in Contact Mechanics and Friction written by Valentin L. Popov and published by Springer. This book was released on 2014-08-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for the first time a simulation method for the fast calculation of contact properties and friction between rough surfaces in a complete form. In contrast to existing simulation methods, the method of dimensionality reduction (MDR) is based on the exact mapping of various types of three-dimensional contact problems onto contacts of one-dimensional foundations. Within the confines of MDR, not only are three dimensional systems reduced to one-dimensional, but also the resulting degrees of freedom are independent from another. Therefore, MDR results in an enormous reduction of the development time for the numerical implementation of contact problems as well as the direct computation time and can ultimately assume a similar role in tribology as FEM has in structure mechanics or CFD methods, in hydrodynamics. Furthermore, it substantially simplifies analytical calculation and presents a sort of “pocket book edition” of the entirety contact mechanics. Measurements of the rheology of bodies in contact as well as their surface topography and adhesive properties are the inputs of the calculations. In particular, it is possible to capture the entire dynamics of a system – beginning with the macroscopic, dynamic contact calculation all the way down to the influence of roughness – in a single numerical simulation model. Accordingly, MDR allows for the unification of the methods of solving contact problems on different scales. The goals of this book are on the one hand, to prove the applicability and reliability of the method and on the other hand, to explain its extremely simple application to those interested.

Download or read book Metal Forming Analysis written by R. H. Wagoner and published by Cambridge University Press. This book was released on 2001-05-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2001 book describes the most important numerical techniques for simulating metal forming operations.

Download or read book Handbook of Contact Mechanics written by Valentin L. Popov and published by Springer. This book was released on 2019-04-26 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains a structured collection of the complete solutions of all essential axisymmetric contact problems. Based on a systematic distinction regarding the type of contact, the regime of friction and the contact geometry, a multitude of technically relevant contact problems from mechanical engineering, the automotive industry and medical engineering are discussed. In addition to contact problems between isotropic elastic and viscoelastic media, contact problems between transversal-isotropic elastic materials and functionally graded materials are addressed, too. The optimization of the latter is a focus of current research especially in the fields of actuator technology and biomechanics. The book takes into account adhesive effects which allow access to contact-mechanical questions about micro- and nano-electromechanical systems. Solutions of the contact problems include both the relationships between the macroscopic force, displacement and contact length, as well as the stress and displacement fields at the surface and, if appropriate, within the half-space medium. Solutions are always obtained with the simplest available method - usually with the method of dimensionality reduction (MDR) or approaches which use the solution of the non-adhesive normal contact problem to solve the respective contact problem.

Download or read book Computational Contact Mechanics written by Peter Wriggers and published by Springer Science & Business Media. This book was released on 2008-04-01 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics of this book span the range from spatial and temporal discretization techniques for contact and impact problems with small and finite deformations over investigations on the reliability of micromechanical contact models over emerging techniques for rolling contact mechanics to homogenization methods and multi-scale approaches in contact problems.

Download or read book Practical Stress Analysis with Finite Elements 3rd Edition written by Bryan J Mac Donald and published by . This book was released on 2020-06-22 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Are you tired of picking up a book that claims to be on "practical" finite element analysis only to find that it is full of the same old theory rehashed and contains no advice to help you plan your analysis? If so then this book is for you!

Download or read book TEXTBOOK OF FINITE ELEMENT ANALYSIS written by P. SESHU and published by PHI Learning Pvt. Ltd.. This book was released on 2003-01-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for a one-semester course in Finite Element Method, this compact and well-organized text presents FEM as a tool to find approximate solutions to differential equations. This provides the student a better perspective on the technique and its wide range of applications. This approach reflects the current trend as the present-day applications range from structures to biomechanics to electromagnetics, unlike in conventional texts that view FEM primarily as an extension of matrix methods of structural analysis. After an introduction and a review of mathematical preliminaries, the book gives a detailed discussion on FEM as a technique for solving differential equations and variational formulation of FEM. This is followed by a lucid presentation of one-dimensional and two-dimensional finite elements and finite element formulation for dynamics. The book concludes with some case studies that focus on industrial problems and Appendices that include mini-project topics based on near-real-life problems. Postgraduate/Senior undergraduate students of civil, mechanical and aeronautical engineering will find this text extremely useful; it will also appeal to the practising engineers and the teaching community.

Download or read book An Engineer s Guide to Friction written by William A. Glaeser and published by . This book was released on 1970 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for coefficient of friction information often arises in the solution of a problem by an engineer who may not be concerned with friction on a day-to-day basis, and therefore not current on the derivation and use of such information. The memorandum reviews the theory of friction, discusses the various factors that influence it, and points out some of the common misconceptions in the use of coefficients of friction. A section is specifically devoted to friction in metalworking operations, and another covers rolling friction specifically. (Author).

Download or read book Friction and Wear written by I V Kragelsky and published by Elsevier. This book was released on 2013-10-22 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction and Wear: Calculation Methods provides an introduction to the main theories of a new branch of mechanics known as ""contact interaction of solids in relative motion."" This branch is closely bound up with other sciences, especially physics and chemistry. The book analyzes the nature of friction and wear, and some theoretical relationships that link the characteristics of the processes and the properties of the contacting bodies essential for practical application of the theories in calculating friction forces and wear values. The effect of the environment on friction and wear is also considered. Finally, the requirements, which must be fulfilled by the physicomechanical properties of the materials of which contacting bodies are made and which determine their behavior in moving contacts, are formulated. The book will be of interest to a wide circle of readers, e.g. engineers, designers, machine users, and research workers, working on the production of wear-resistant materials and working on the nature of friction and wear.