Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Direct Extrusion written by Dr Ing Dan-Andrei Marinescu and published by Independently Published. This book was released on 2019-01-22 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5 -Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Indirect Extrusion written by Dr Ing Dan Marinescu and published by . This book was released on 2019-01-22 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5-Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer from Scratch DIY Project corexy 3D Printer Double Extrusion written by Dr Ing Dan Marinescu and published by Independently Published. This book was released on 2019-01-25 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, of technical documentation in English and German. Everything is described using clear and simple to follow steps. There is as little text possible, the focus being oriented to the graphical contend. You won't find stories about 3d printing or explanations about how a 3d printer looks like and what it is supposed to do - All that is very well covered in other publications, here the content is meant to be strictly oriented on the building, setting up and programming instructions needed in order to easily build and get it running a 3D printer with the following specifications: -CoreXY architecture-Aluminum frame 20 x 20 Nut 5-Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book How to Build a 3D Printer written by Marinescu and published by Independently Published. This book was released on 2019-08-08 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EASY CoreXY M350 is a medium size 3D Printer born from the desire of making something simple to build, where only basic tools are needed but in the same time the expectation of the RepRap Makers are fully met: printing precision, rigid structure, safety, bed leveling, configurability and multi-filament printing.The 'corexy'-architecture is a very practically and cost effective solution for cartesian 3d printers and that is the reason why I've preferred this concept. The model 'M350' earned his name from the fact that all the aluminum profiles from the frame are exactly 350mm long - this simplifies already from beginning a lot of aspects concerning the building of the frame.The Book is a building manual which describes a strait forward process with easy to follow steps. There are no stories about 3d printing, the focus is set up on printing the necessary components, mechanical construction, electrical harness, wiring diagram and firmware. Everything is described using pictures from 3d and from reality, the text is in simple plain English.There were used as much as possible standard components for RepRap 3d printers - this gives the complete freedom when it comes on deciding from where to purchase the needed components. The number and dimension of the 3d-printed elements were kept at minimum in order to optimize the time and cost of printing process

Download or read book Building Manual 3D Printer Build It Yourself CoreXY V1 1 Direct Extrusion written by Ing. Dan-Andrei Marinescu and published by . This book was released on 2018-11-14 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, 80 pages, BUILDING MANUAL in English and German that will provided you every information needed in order to easily build and get it running a 3D printer with the following specifications:-CoreXY architecture-Aluminum frame 20 x 20 Nut 5 -Guides from IGUS-Assembly parts from PETG (3D printed)-Frame dimensions 508 x 460 x 480 mm (L x B x H)-Total exterior dimensions: 550 x 460 x 780 mm (L x B x H)-Working volume: 220 x 220 x 240 mm (L x B x H)-The filament spool is inside-Print Bed automatic alignment-Permanent printing surface: 220 x 220 x 6 mm-Motherboard: Rumba Board-Titan Extruder with 0.4 mm nozzle-Heat bed: max. 130 ° C-Extrusion temperature: max. 300 ° C-Power supply: 230V / 24V 400W-Interface: USB or SD-Card-Precision in XY: 0.1 mm-Resolution: 0.05-0.3 mm-Firmware: Marlin> I M P O R T A N T

Download or read book Building Manual 3D Printer Build It Yourself CoreXY V1 0 Indirect Extrusion written by Ing. Dan-Andrei Marinescu and published by . This book was released on 2018-11-15 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: -

Download or read book Practical 3D Printers written by Brian Evans and published by Apress. This book was released on 2012-08-28 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Desktop or DIY 3D printers are devices you can either buy preassembled as a kit, or build from a collection of parts to design and print physical objects including replacement household parts, custom toys, and even art, science, or engineering projects. Maybe you have one, or maybe you're thinking about buying or building one. Practical 3D Printers takes you beyond how to build a 3D printer, to calibrating, customizing, and creating amazing models, including 3D printed text, a warship model, a robot platform, windup toys, and arcade-inspired alien invaders. You'll learn about the different types of personal 3D printers and how they work; from the MakerBot to the RepRap printers like the Huxley and Mendel, as well as the whiteAnt CNC featured in the Apress book Printing in Plastic. You'll discover how easy it is to find and design 3D models using web-based 3D modeling, and even how to create a 3D model from a 2D image. After learning the basics, this book will walk you through building multi-part models with a steampunk warship project, working with meshes to build your own action heroes, and creating an autonomous robot chassis. Finally, you'll find even more bonus projects to build, including wind-up walkers, faceted vases for the home, and a handful of useful upgrades to modify and improve your 3D printer.

Download or read book Practical 3D Printers written by Brian Evans and published by Apress. This book was released on 2012-09-25 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Desktop or DIY 3D printers are devices you can either buy preassembled as a kit, or build from a collection of parts to design and print physical objects including replacement household parts, custom toys, and even art, science, or engineering projects. Maybe you have one, or maybe you're thinking about buying or building one. Practical 3D Printers takes you beyond how to build a 3D printer, to calibrating, customizing, and creating amazing models, including 3D printed text, a warship model, a robot platform, windup toys, and arcade-inspired alien invaders. You'll learn about the different types of personal 3D printers and how they work; from the MakerBot to the RepRap printers like the Huxley and Mendel, as well as the whiteAnt CNC featured in the Apress book Printing in Plastic. You'll discover how easy it is to find and design 3D models using web-based 3D modeling, and even how to create a 3D model from a 2D image. After learning the basics, this book will walk you through building multi-part models with a steampunk warship project, working with meshes to build your own action heroes, and creating an autonomous robot chassis. Finally, you'll find even more bonus projects to build, including wind-up walkers, faceted vases for the home, and a handful of useful upgrades to modify and improve your 3D printer.

Download or read book Advances in Soft and Hard Computing written by Jerzy Pejaś and published by Springer. This book was released on 2018-12-12 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a collection of carefully selected, peer-reviewed papers from the 21st International Multi-Conference on Advanced Computer Systems 2018 (ACS 2018), which was held in Międzyzdroje, Poland on September 24th-26th, 2018. The goal of the ACS 2018 was to bring artificial intelligence, software technologies, biometrics, IT security and distance learning researchers in contact with the ACS community, and to give ACS attendees the opportunity to exchange notes on the latest advances in these areas of interest. The primary focus of the book is on high-quality, original and unpublished research, case studies, and implementation experiences. All of the respective papers are of practical relevance to the construction, evaluation, application or operation of advanced systems. The topics addressed are divided into five major groups: artificial intelligence, software technologies, information technology security, multimedia systems, and information system design.

Download or read book 3D Printing in Biomedical Engineering written by Sunpreet Singh and published by Springer Nature. This book was released on 2020-07-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of the rapidly evolving field of three-dimensional (3D) printing, and its increasing applications in the biomedical domain. 3D printing has distinct advantages like improved quality, cost-effectiveness, and higher efficiency compared to traditional manufacturing processes. Besides these advantages, current challenges and opportunities regarding choice of material, design, and efficiency are addressed in the book. Individual chapters also focus on select areas of applications such as surgical guides, tissue regeneration, artificial scaffolds and implants, and drug delivery and release. This book will be a valuable source of information for researchers and professionals interested in the expanding biomedical applications of 3D printing.

Download or read book Mastering 3D Printing written by Joan Horvath and published by Apress. This book was released on 2020-05-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get the most out of your printer, including how to design models, choose materials, work with different printers, and integrate 3D printing with traditional prototyping to make techniques like sand casting more efficient.This book is for new 3D printer owners, makers of all kinds, entrepreneurs, technology educators, and anyone curious about what you can do with a 3D printer. In this revised and expanded new edition of Mastering 3D Printing, which has been a trusted resource through five years of evolution in the 3D printing industry, you’ll gain a comprehensive understanding of 3D printing. This book presumes no foreknowledge and describes what you need to know about how printers work, how to decide which type of printer (filament, resin, or powder) makes the most sense for you, and then how to go forward in the case of filament and resin printers. This new edition now includes material about consumer resin printing, the evolution of lower-cost metal printing, and the plethora of both materials and applications. What You’ll LearnChoose among the different 3D printing technologiesCreate or find 3D models to printMake both easy and challenging prints come out as you imaginedAssess whether your business, factory, home or classroom will benefit from 3D printingWork with applications that are good candidates for first projects in home and industrial applications Who This Book Is For People who are encountering 3D printing for the first time, or for those who want to level up their skills. It is designed for the nontechnical adult and minimizes jargon. However more sophisticated users will still find tips and insights of value.

Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer. This book was released on 2019-12-01 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Download or read book Mastering 3D Printing written by Joan Horvath and published by Apress. This book was released on 2014-09-18 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering 3D Printing shows you how to get the most out of your printer, including how to design models, choose materials, work with different printers, and integrate 3D printing with traditional prototyping to make techniques like sand casting more efficient. You've printed key chains. You've printed simple toys. Now you're ready to innovate with your 3D printer to start a business or teach and inspire others. Joan Horvath has been an educator, engineer, author, and startup 3D printing company team member. She shows you all of the technical details you need to know to go beyond simple model printing to make your 3D printer work for you as a prototyping device, a teaching tool, or a business machine.

Download or read book Modelling and Control of Mechatronic and Robotic Systems written by Alessandro Gasparetto and published by MDPI. This book was released on 2021-09-02 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, the modelling and control of mechatronic and robotic systems is an open and challenging field of investigation in both industry and academia. The book encompasses the kinematic and dynamic modelling, analysis, design, and control of mechatronic and robotic systems, with the scope of improving their performance, as well as simulating and testing novel devices and control architectures. A broad range of disciplines and topics are included, such as robotic manipulation, mobile systems, cable-driven robots, wearable and rehabilitation devices, variable stiffness safety-oriented mechanisms, optimization of robot performance, and energy-saving systems.

Download or read book 3D Printing with Delta Printers written by Charles Bell and published by Apress. This book was released on 2015-07-14 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Do you find yourself wondering what the fuss is about a delta 3D printer? Perhaps you’ve decided to buy one but all of your 3D printing friends are busily perfecting their Cartesian printers. Maybe you find yourself stymied by the fact that your delta printer has very different needs for setup, configuration, calibration, and maintenance than Cartesian printers. 3D Printing with Delta Printers contains detailed descriptions of the innovative delta design including unique hardware, software, and maintenance requirements. The book also covers tips for building your own delta printer as well as examples of common enhancements. This book will enable you to build, configure, and enhance your delta printer. The topics covered will reveal the often-mysterious nuances of the delta design that will enable your printer to compete with the best of what your 3D printer friends can build.

Download or read book Process Structure Properties in Polymer Additive Manufacturing written by Swee Leong Sing and published by MDPI. This book was released on 2021-09-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is an exciting field and has great potential in transformative and translational research in many fields, such as biomedical, aerospace, and even electronics. Current methods for polymer AM include material extrusion, material jetting, vat polymerisation, and powder bed fusion. With the promise of more applications, detailed understanding of AM—from the processability of the feedstock to the relationship between the process–structure–properties of AM parts—has become more critical. More research work is needed in material development to widen the choice of materials for polymer additive manufacturing. Modelling and simulations of the process will allow the prediction of microstructures and mechanical properties of the fabricated parts while complementing the understanding of the physical phenomena that occurs during the AM processes. In this book, state-of-the-art reviews and current research are collated, which focus on the process–structure–properties relationships in polymer additive manufacturing.

Download or read book Additive Manufacturing Hybrid Processes for Composites Systems written by António Torres Marques and published by Springer Nature. This book was released on 2020-04-27 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the emerging additive manufacturing technology and its applications beyond state-of-the-art, fibre-reinforced thermoplastics. It also discusses the development of a hybrid, integrated process that combines additive and subtractive operations in a single-step platform, allowing CAD-to-Part production with freeform shapes using long or continuous fibre-reinforced thermoplastics. The book covers the entire value chain of this next-generation technology, from part design and materials composition to transformation stages, product evaluation, and end-of-life studies. Moreover, it addresses the following engineering issues: • Design rules for hybrid additive manufacturing; • Thermoplastic compounds for high-temperature and -strength applications; • Advanced extrusion heads and process concepts; • Hybridisation strategies; • Software ecosystems for hAM design, pre-processing, process planning, emulating and multi-axis processing; • 3D path generators for hAM based on a multi-objective optimisation algorithm that matches the recent curved adaptive slicing method with a new transversal scheme; • hAM parameters, real-time monitoring and closed-loop control; • Multiparametric nondestructive testing (NDT) tools customised for FRTP AM parts; • Sustainable manufacturing processes validated by advanced LCA/LCC models.