Download or read book Hot Working Guide written by Y. V. R. K. Prasad and published by ASM International. This book was released on 1997-01-01 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique source book with flow stress data for hot working, processing maps with metallurgical interpretation and optimum processing conditions for metals, alloys, intermetallics, and metal matrix composites. The use of this book replaces the expensive and time consuming trial and error methods in process design and product development.
Download or read book Hot Working Guide A Compendium of Processing Maps Second Edition written by Y.V.R.K. Prasad; K.P. Rao; S. Sasidhar and published by ASM International. This book was released on 2015-08-01 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot Working Guide: A Compendium of Processing Maps, Second Edition is a unique source book with flow stress data for hot working, processing maps with metallurgical interpretation and optimum processing conditions for metals, alloys, intermetallics, and metal matrix composites. The use of this book replaces the expensive and time consuming trial and error methods in process design and product development.
Download or read book ASM Specialty Handbook written by M. M. Avedesian and published by ASM International. This book was released on 1999-01-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ASM Handbook is the most comprehensive collection of engineering information on this important structural material published in the last sixty years. Prepared with the cooperation of the International Magnesium Association, it presents the current industrial practices and provides information and data about the properties and performance of magnesium alloys. Materials science and engineering are covered, including processing, properties, and commercial uses.
Download or read book Ergonomics Guidelines and Problem Solving written by A. Mital and published by Elsevier. This book was released on 2000-01-31 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an urgent need to disseminate ergonomics "know-how" to the work place. This book meets that need by providing clear guidelines and problem solving recommendations to assist the practitioner in decisions that directly protect the health, safety and well-being of the worker.The guidelines have evolved from a series of symposia on Ergonomic Guidelines and Problem Solving. Initially experts in each area selected were asked to write draft guidelines. These guidelines were circulated to participants at the symposia and to other experts for review before being comprehensively revised. In some instances these guidelines cannot be considered complete but it is important now to put some recommendations forward as guidelines. It is hoped that as new research emerges each guideline will be updated.Each guideline has been divided into two parts. Part I contains the guidelines for the practitioner and Part II provides the scientific basis or the knowledge for the guide. Such separation of the applied and theoretical content was designed to facilitate rapid incorporation of the guide into practice.The target audience for this book is the practitioner. The practitioner may be a manager, production system designer, shop supervisor, occupational health and safety professional, union representative, labor inspector or production engineer. For each of the guidelines, relevant practitioners are described.Topics covered include work space design, tool design, work-rest schedules, illumination and maintenance.
Download or read book Guide to Information Sources in Engineering written by Charles Lord and published by Bloomsbury Publishing USA. This book was released on 2000-08-15 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only source that focuses exclusively on engineering and technology, this important guide maps the dynamic and changing field of information sources published for engineers in recent years. Lord highlights basic perspectives, access tools, and English-language resources—directories, encyclopedias, yearbooks, dictionaries, databases, indexes, libraries, buyer's guides, Internet resources, and more. Substantial emphasis is placed on digital resources. The author also discusses how engineers and scientists use information, the culture and generation of scientific information, different types of engineering information, and the tools and resources you need to locate and access that material. Other sections describe regulations, standards and specifications, government resources, professional and trade associations, and education and career resources. Engineers, scientists, librarians, and other information professionals working with engineering and technology information will welcome this research
Download or read book American Reference Books Annual written by Juneal M. Chenoweth and published by Bloomsbury Publishing USA. This book was released on 2019-06-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Read professional, fair reviews by practicing academic, public, and school librarians and subject-area specialists that will enable you to make the best choices from among the latest reference resources. This newest edition of American Reference Books Annual (ARBA) provides librarians with insightful, critical reviews of print and electronic reference resources released or updated in 2017-2018, as well as some from 2019 that were received in time for review in the publication. By using this invaluable guide to consider both the positive and negative aspects of each resource, librarians can make informed decisions about which new reference resources are most appropriate for their collections and their patrons' needs. Collection development librarians who are working with limited budgets—as is the case in practically every library today—will be able to maximize the benefit from their monetary resources by selecting what they need most for their collection, while bypassing materials that bring limited value to their specific environment.
Download or read book Magnesium Technology 2011 written by Wim Sillekens and published by Springer. This book was released on 2016-12-10 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Advances in Materials Research written by G. Kumaresan and published by Springer Nature. This book was released on 2021-02-04 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the International Conference on Advances in Materials Research (ICAMR 2019). The contents cover latest research in materials and their applications relevant to composites, metals, alloys, polymers, energy and phase change. The indigenous properties of materials including mechanical, electrical, thermal, optical, chemical and biological functions are discussed. The book also elaborates the properties and performance enhancement and/or deterioration in order of the modifications in atomic particles and structure. This book will be useful for both students and professionals interested in the development and applications of advanced materials.
Download or read book Shape Memory Alloys 2017 written by Takuo Sakon and published by MDPI. This book was released on 2018-03-15 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue Shape Memory Alloys 2017" that was published in Metals
Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.
Download or read book Smithells Metals Reference Book written by William F. Gale and published by Elsevier. This book was released on 2003-12-09 with total page 2072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smithells is the only single volume work which provides data on all key apsects of metallic materials.Smithells has been in continuous publication for over 50 years. This 8th Edition represents a major revision.Four new chapters have been added for this edition. these focus on; * Non conventional and emerging materials - metallic foams, amorphous metals (including bulk metallic glasses), structural intermetallic compounds and micr/nano-scale materials. * Techniques for the modelling and simulation of metallic materials. * Supporting technologies for the processing of metals and alloys.* An Extensive bibliography of selected sources of further metallurgical information, including books, journals, conference series, professional societies, metallurgical databases and specialist search tools.* One of the best known and most trusted sources of reference since its first publication more than 50 years ago* The only single volume containing all the data needed by researchers and professional metallurgists* Fully updated to the latest revisions of international standards
Download or read book Material and Process Design for Lightweight Structures written by Talal Al-Samman and published by MDPI. This book was released on 2019-05-27 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lightweight structures across several industries has become inevitable in today’s world given the ever-rising demand for improved fuel economy and resource efficiency. In the automotive industry, composites, reinforced plastics, and lightweight materials, such as aluminum and magnesium are being adopted by many OEMs at increasing rates to reduce vehicle mass and develop efficient new lightweight designs. Automotive weight reduction with high-strength steel is also witnessing major ongoing efforts to design novel damage-controlled forming processes for a new generation of efficient, lightweight steel components. Although great progress has been made over the past decades in understanding the thermomechanical behavior of these materials, their extensive use as lightweight solutions is still limited due to numerous challenges that play a key role in cost competitiveness. Hence, significant research efforts are still required to fully understand the anisotropic material behavior, failure mechanisms, and, most importantly, the interplay between industrial processing, microstructure development, and the resulting properties. This Special Issue reprint book features concise reports on the current status in the field. The topics discussed herein include areas of manufacturing and processing technologies of materials for lightweight applications, innovative microstructure and process design concepts, and advanced characterization techniques combined with modeling of material’s behavior.
Download or read book Cold Spray Technology written by Anatolii Papyrin and published by Elsevier. This book was released on 2006-10-04 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is Cold Spray technology. Cold Spray is a process of applying coatings by exposing a metallic or dielectric substrate to a high velocity (300 to 1200 m/s) jet of small (1 to 50 μm) particles accelerated by a supersonic jet of compressed gas. This process is based on the selection of the combination of particle temperature, velocity, and size that allows spraying at the lowest temperature possible. In the Cold Spray process, powder particles are accelerated by the supersonic gas jet at a temperature that is always lower than the melting point of the material, resulting in coating formation from particles in the solid state. As a consequence, the deleterious effects of high-temperature oxidation, evaporation, melting, crystallization, residual stresses, gas release, and other common problems for traditional thermal spray methods are minimized or eliminated. This book is the first of its kind on the Cold Spray process. Cold Spray Technology covers a wide spectrum of various aspects of the Cold Spray technology, including gas-dynamics, physics of interaction of high-speed solid particles with a substrate as well as equipment, technologies, and applications. Cold Spray Technology includes the results of more than 20 years of original studies (1984-2005) conducted at the Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Science, as well as the results of studies conducted at most of the research centres around the world. The authors' goal is threefold. The first goal is to explain basic principles and advantages of the Cold Spray process. The second goal is, to give practical information on technologies and equipment. The third goal is to present the current state of research and development in this field over the world. The book provides coverage and data that will be of interest for users of Cold Spray technology as well as for other coating experts. At the present time the Cold Spray method is recognized by world leading scientists and specialists. A wide spectrum of research is being conducted at many research centres and companies in many countries. New approach to spray coatings Results are exceptionally pure coatings Low spray temperature without degradation of powder and substrate materials High productivity, high deposition efficiency High operational safety because of absence of high temperature gas jets, radiation and explosive gases Excellent thermal and electrical conductivity Wide spectrum of applications because of important advantages of the process
Download or read book Advances in Plastic Forming of Metals written by Myoung-Gyu Lee and published by MDPI. This book was released on 2018-10-18 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advances in Plastic Forming of Metals" that was published in Metals
Download or read book Processing and Characterization of Magnesium Based Materials written by Domonkos Tolnai and published by MDPI. This book was released on 2021-08-31 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their lightweight and high specific strength, Mg-based alloys are considered as substitutes to their heavier counterparts in applications in which corrosion is non-relevant and weight saving is of importance. Furthermore, due to the biocompatibility of Mg, some alloys with controlled corrosion rates are used as degradable implant materials in the medical sector. The typical processing route of Mg parts incorporates a casting step and, subsequently, a thermo–mechanical treatment. In order to achieve the desired macroscopic properties and thus fulfill the service requirements, thorough knowledge of the relationship between the microstructure, the processing steps, and the resulting property profile is necessary. This Special Issue covers in situ and ex situ experimental and computational investigations of the behavior under thermo–mechanical load of Mg-based alloys utilizing modern characterization and simulation techniques. The papers cover investigations on the effect of rare earth additions on the mechanical properties of different Mg alloys, including the effect of long-period stacking-ordered (LPSO) structures, and the experimental and computational investigation of the effect of different processing routes.
Download or read book Physics and Engineering of Metallic Materials written by Yafang Han and published by Springer. This book was released on 2019-02-14 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the Chinese Materials Conference 2018 (CMC2018) held in Xiamen City, Fujian, China, on July 12–16, 2018. The Chinese Materials Conference (CMC) is the Chinese Materials Research Society’s most important conference series and has been held annually since the early 1990s. The 2018 edition consisted of 32 domestic symposia, 2 international symposia and 1 international materials forum. This proceedings book covers the fields of powder metallurgy, advanced aluminum alloys, advanced magnesium alloys, superalloys, metal matrix composites, space materials science and technology, as well as nanoporous metal materials, and presents recent original research findings from more than 300 research groups at various universities and research institutes.
Download or read book Handbook of Workability and Process Design written by George E. Dieter and published by ASM International. This book was released on 2003-01-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
