Download or read book Holistic Schedulability Analysis for Distributed Hard Real time Systems written by Ken Tindell and published by . This book was released on 1993 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "This report extends the current analysis associated with static priority pre-emptive based scheduling to address the wider problem of analysing schedulability of a distributed hard real-time system; in particular it derives analysis for a distributed system where tasks with arbitrary deadlines communicate by message passing and shared data areas. A simple TDMA protocol is assumed, and analysis developed to bound not only the communications delays, but also the delays and overheads incurred when messages are processed by the protocol stack at the destination processor. The report illustrates how a window-based analysis technique can be used to find the worst-case response times of a distributed task set. An extended example illustrating the application of the analysis is presented."

Download or read book Distributed Real Time Systems written by K. Erciyes and published by Springer. This book was released on 2019-07-23 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classroom-tested textbook describes the design and implementation of software for distributed real-time systems, using a bottom-up approach. The text addresses common challenges faced in software projects involving real-time systems, and presents a novel method for simply and effectively performing all of the software engineering steps. Each chapter opens with a discussion of the core concepts, together with a review of the relevant methods and available software. This is then followed with a description of the implementation of the concepts in a sample kernel, complete with executable code. Topics and features: introduces the fundamentals of real-time systems, including real-time architecture and distributed real-time systems; presents a focus on the real-time operating system, covering the concepts of task, memory, and input/output management; provides a detailed step-by-step construction of a real-time operating system kernel, which is then used to test various higher level implementations; describes periodic and aperiodic scheduling, resource management, and distributed scheduling; reviews the process of application design from high-level design methods to low-level details of design and implementation; surveys real-time programming languages and fault tolerance techniques; includes end-of-chapter review questions, extensive C code, numerous examples, and a case study implementing the methods in real-world applications; supplies additional material at an associated website. Requiring only a basic background in computer architecture and operating systems, this practically-oriented work is an invaluable study aid for senior undergraduate and graduate-level students of electrical and computer engineering, and computer science. The text will also serve as a useful general reference for researchers interested in real-time systems.

Download or read book Advances in Real Time Systems written by Samarjit Chakraborty and published by Springer Science & Business Media. This book was released on 2012-02-09 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the lectures given in honor to Georg Färber as tribute to his contributions in the area of real-time and embedded systems. The chapters of many leading scientists cover a wide range of aspects, like robot or automotive vision systems or medical aspects.

Download or read book Analysis and Synthesis of Distributed Real Time Embedded Systems written by Paul Pop and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded computer systems are now everywhere: from alarm clocks to PDAs, from mobile phones to cars, almost all the devices we use are controlled by embedded computers. An important class of embedded computer systems is that of hard real-time systems, which have to fulfill strict timing requirements. As real-time systems become more complex, they are often implemented using distributed heterogeneous architectures. Analysis and Synthesis of Distributed Real-Time Embedded Systems addresses the design of real-time applications implemented using distributed heterogeneous architectures. The systems are heterogeneous not only in terms of hardware components, but also in terms of communication protocols and scheduling policies. Regarding this last aspect, time-driven and event-driven systems, as well as a combination of the two, are considered. Such systems are used in many application areas like automotive electronics, real-time multimedia, avionics, medical equipment, and factory systems. The proposed analysis and synthesis techniques derive optimized implementations that fulfill the imposed design constraints. An important part of the implementation process is the synthesis of the communication infrastructure, which has a significant impact on the overall system performance and cost. Analysis and Synthesis of Distributed Real-Time Embedded Systems considers the mapping and scheduling tasks within an incremental design process. To reduce the time-to-market of products, the design of real-time systems seldom starts from scratch. Typically, designers start from an already existing system, running certain applications, and the design problem is to implement new functionality on top of this system. Supporting such an incremental design process provides a high degree of flexibility, and can result in important reductions of design costs. STRONGAnalysis and Synthesis of Distributed Real-Time Embedded Systems will be of interest to advanced undergraduates, graduate students, researchers and designers involved in the field of embedded systems.

Download or read book Holistic Schedulability Analysis of a Fault tolerant Real time Distributed Run time Support written by Pascal Chevochot and published by . This book was released on 2000 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Real time Systems Scheduling 1 written by Maryline Chetto and published by John Wiley & Sons. This book was released on 2014-11-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time systems are used in a wide range of applications, including control, sensing, multimedia, etc. Scheduling is a central problem for these computing/communication systems since responsible of software execution in a timely manner. This book provides state of knowledge in this domain with special emphasis on the key results obtained within the last decade. This book addresses foundations as well as the latest advances and findings in Real-Time Scheduling, giving all references to important papers. But nevertheless the chapters will be short and not overloaded with confusing details. Coverage includes scheduling approaches for mono-core as well as multi-core platforms, dependent tasks, networks, and notably very tremendous recent advances in scheduling of energy constrained embedded systems. Other sophisticated issues such as feedback control scheduling and timing analysis of critical applications are also addressed. This volume can serve as a textbook for courses on the topic in bachelor and in more advanced master programs. It also provides a reference for computer scientists and engineers involved in the design or the development of Cyber-Physical Systems which require up-to-date real-time scheduling solutions.

Download or read book Deadline Scheduling for Real Time Systems written by John A. Stankovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many real-time systems rely on static scheduling algorithms. This includes cyclic scheduling, rate monotonic scheduling and fixed schedules created by off-line scheduling techniques such as dynamic programming, heuristic search, and simulated annealing. However, for many real-time systems, static scheduling algorithms are quite restrictive and inflexible. For example, highly automated agile manufacturing, command, control and communications, and distributed real-time multimedia applications all operate over long lifetimes and in highly non-deterministic environments. Dynamic real-time scheduling algorithms are more appropriate for these systems and are used in such systems. Many of these algorithms are based on earliest deadline first (EDF) policies. There exists a wealth of literature on EDF-based scheduling with many extensions to deal with sophisticated issues such as precedence constraints, resource requirements, system overload, multi-processors, and distributed systems. Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms aims at collecting a significant body of knowledge on EDF scheduling for real-time systems, but it does not try to be all-inclusive (the literature is too extensive). The book primarily presents the algorithms and associated analysis, but guidelines, rules, and implementation considerations are also discussed, especially for the more complicated situations where mathematical analysis is difficult. In general, it is very difficult to codify and taxonomize scheduling knowledge because there are many performance metrics, task characteristics, and system configurations. Also, adding to the complexity is the fact that a variety of algorithms have been designed for different combinations of these considerations. In spite of the recent advances there are still gaps in the solution space and there is a need to integrate the available solutions. For example, a list of issues to consider includes: preemptive versus non-preemptive tasks, uni-processors versus multi-processors, using EDF at dispatch time versus EDF-based planning, precedence constraints among tasks, resource constraints, periodic versus aperiodic versus sporadic tasks, scheduling during overload, fault tolerance requirements, and providing guarantees and levels of guarantees (meeting quality of service requirements). Deadline Scheduling for Real-Time Systems: EDF and Related Algorithms should be of interest to researchers, real-time system designers, and instructors and students, either as a focussed course on deadline-based scheduling for real-time systems, or, more likely, as part of a more general course on real-time computing. The book serves as an invaluable reference in this fast-moving field.

Download or read book Parallel and Distributed Processing written by José D. P. Rolim and published by Springer Science & Business Media. This book was released on 1999-03-30 with total page 1474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of 11 IPPS/SPDP '98 Workshops held in conjunction with the 13th International Parallel Processing Symposium and the 10th Symposium on Parallel and Distributed Processing in San Juan, Puerto Rico, USA in April 1999. The 126 revised papers presented were carefully selected from a wealth of papers submitted. The papers are organised in topical sections on biologically inspired solutions to parallel processing problems: High-Level Parallel Programming Models and Supportive Environments; Biologically Inspired Solutions to Parallel Processing; Parallel and Distributed Real-Time Systems; Run-Time Systems for Parallel Programming; Reconfigurable Architectures; Java for Parallel and Distributed Computing; Optics and Computer Science; Solving Irregularly Structured Problems in Parallel; Personal Computer Based Workstation Networks; Formal Methods for Parallel Programming; Embedded HPC Systems and Applications.

Download or read book Embedded System Design Topics Techniques and Trends written by Achim Rettberg and published by Springer. This book was released on 2010-05-09 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the technical program of the 2007 International Embedded Systems Symposium held in Irvine, California. It covers timely topics, techniques and trends in embedded system design, including design methodology, networks-on-chip, distributed and networked systems, and system verification. It places emphasis on automotive and medical applications and includes case studies and special aspects in embedded system design.

Download or read book UML for Real written by Luciano Lavagno and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexity of most real-time and embedded systems often exceeds that of other types of systems since, in addition to the usual spectrum of problems inherent in software, they need to deal with the complexities of the physical world. That world—as the proverbial Mr. Murphy tells us—is an unpredictable and often unfriendly place. Consequently, there is a very strong motivation to investigate and apply advanced design methods and technologies that could simplify and improve the reliability of real-time software design and implementation. As a result, from the first versions of UML issued in the mid 1990’s, designers of embedded and real-time systems have taken to UML with vigour and enthusiasm. However, the dream of a complete, model-driven design flow from specification through automated, optimised code generation, has been difficult to realise without some key improvements in UML semantics and syntax, specifically targeted to the real-time systems problem. With the enhancements in UML that have been proposed and are near standardisation with UML 2. 0, many of these improvements have been made. In the Spring of 2003, adoption of a formalised UML 2. 0 specification by the members of the Object Management Group (OMG) seems very close. It is therefore very appropriate to review the status of UML as a set of notations for embedded real-time systems - both the state of the art and best practices achieved up to this time with UML of previous generations - and where the changes embodied in the 2.

Download or read book Structural Information and Communication Complexity written by Adrian Kosowski and published by Springer. This book was released on 2011-06-24 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 18th International Colloquium on Structural Information and Communication Complexity, SIROCCO 2011, held in Gdańsk, Poland, in June 2011. The 24 revised full papers presented together with 1 survey lecture and 2 invited talks were carefully reviewed and selected from 57 submissions. The papers are organized in topical section on fault tolerance, routing, mobile agents, mobile robots, probabilistic methods, distributed algorithms on graphs, and ad-hoc networks.

Download or read book Embedded Systems Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2018-09-03 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area of computer engineering with a currently appropriate emphasis on developments in networking and applications. Those experts directly involved in the creation and evolution of the ideas and technologies presented offer tutorials, research surveys, and technology overviews that explore cutting-edge developments and deployments and identify potential trends. This first self-contained volume of the handbook, Embedded Systems Design and Verification, is divided into three sections. It begins with a brief introduction to embedded systems design and verification. It then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Those interested in taking their work with embedded systems to the network level should complete their study with the second volume: Network Embedded Systems.

Download or read book Reconfigurable Distributed Control written by Fabián García-Nocetti and published by Springer Science & Business Media. This book was released on 2005-07 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed control systems offer the advantages of control local to the process being controlled while retaining the ease of control at a single centralised location. Typically such a system has involved a great deal of hard-wiring and has been of most use only in situations where flexibility is not essential. Now, however, distributed control systems are being applied more often in process control, autonomous systems and safety-critical systems where control needs to change to cope with fault appearance or other (possibly intentional) process disturbance. Reconfigurable Distributed Control helps meet the challenge of applying distributed control to dynamical systems, integrating different approaches to the problem. It presents an holistic view based on the appropriate use of stochastic, formal and robust control paradigms. The use of smart peripheral elements means that the degree of effort required for the reconfiguration of a networked control system can now be reduced, particular emphasis being placed on the reduction of time delays. Case studies are employed to demonstrate the real applications of the theory. While being of most interest to academic researchers and graduate students grappling with the problem of making distributed control systems more responsive to changes in process and plant, Reconfigurable Distributed Control will also be informative for readers with a background in more general distributed computing.

Download or read book Computer Aided Verification written by Isil Dillig and published by Springer. This book was released on 2019-07-12 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: The open access two-volume set LNCS 11561 and 11562 constitutes the refereed proceedings of the 31st International Conference on Computer Aided Verification, CAV 2019, held in New York City, USA, in July 2019. The 52 full papers presented together with 13 tool papers and 2 case studies, were carefully reviewed and selected from 258 submissions. The papers were organized in the following topical sections: Part I: automata and timed systems; security and hyperproperties; synthesis; model checking; cyber-physical systems and machine learning; probabilistic systems, runtime techniques; dynamical, hybrid, and reactive systems; Part II: logics, decision procedures; and solvers; numerical programs; verification; distributed systems and networks; verification and invariants; and concurrency.

Download or read book Real Time Systems in Mechatronic Applications written by Jan Wikander and published by Springer Science & Business Media. This book was released on 2007-11-23 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-Time Systems in Mechatronic Applications brings together in one place important contributions and up-to-date research results in this fast moving area. Real-Time Systems in Mechatronic Applications serves as an excellent reference, providing insight into some of the most challenging research issues in the field.

Download or read book Algorithms and Architectures for Parallel Processing written by Guojin Wang and published by Springer. This book was released on 2015-11-18 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Workshops and Symposiums of the 15th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2015, held in Zhangjiajie, China, in November 2015. The program of this year consists of 6 symposiums/workshops that cover a wide range of research topics on parallel processing technology: the Sixth International Workshop on Trust, Security and Privacy for Big Data, TrustData 2015; the Fifth International Symposium on Trust, Security and Privacy for Emerging Applications, TSP 2015; the Third International Workshop on Network Optimization and Performance Evaluation, NOPE 2015; the Second International Symposium on Sensor-Cloud Systems, SCS 2015; the Second International Workshop on Security and Privacy Protection in Computer and Network Systems, SPPCN 2015; and the First International Symposium on Dependability in Sensor, Cloud, and Big Data Systems and Applications, DependSys 2015. The aim of these symposiums/workshops is to provide a forum to bring together practitioners and researchers from academia and industry for discussion and presentations on the current research and future directions related to parallel processing technology. The themes and topics of these symposiums/workshops are a valuable complement to the overall scope of ICA3PP 2015 and give additional values and interests.

Download or read book The Engineering of Complex Real Time Computer Control Systems written by George W. Irwin and published by Springer. This book was released on 2007-11-23 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineering of Complex Real-Time Computer Control Systems brings together in one place important contributions and up-to-date research results in this important area. The Engineering of Complex Real-Time Computer Control Systems serves as an excellent reference, providing insight into some of the most important research issues in the field.