Download or read book Design of Highway Bridges written by Richard M. Barker and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of bridge design and analysis revised to reflect the fifth edition of the AASHTO LRFD specifications Design of Highway Bridges, Third Edition offers detailed coverage of engineering basics for the design of short- and medium-span bridges. Revised to conform with the latest fifth edition of the American Association of State Highway and Transportation Officials (AASHTO) LRFD Bridge Design Specifications, it is an excellent engineering resource for both professionals and students. This updated edition has been reorganized throughout, spreading the material into twenty shorter, more focused chapters that make information even easier to find and navigate. It also features: Expanded coverage of computer modeling, calibration of service limit states, rigid method system analysis, and concrete shear Information on key bridge types, selection principles, and aesthetic issues Dozens of worked problems that allow techniques to be applied to real-world problems and design specifications A new color insert of bridge photographs, including examples of historical and aesthetic significance New coverage of the "green" aspects of recycled steel Selected references for further study From gaining a quick familiarity with the AASHTO LRFD specifications to seeking broader guidance on highway bridge design Design of Highway Bridges is the one-stop, ready reference that puts information at your fingertips, while also serving as an excellent study guide and reference for the U.S. Professional Engineering Examination.
Download or read book Design of Reinforced Masonry Structures written by Narendra Taly and published by McGraw Hill Professional. This book was released on 2010-06-05 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Definitive Guide to Designing Reinforced Masonry Structures Fully updated to the 2009 International Building Code (2009 IBC) and the 2008 Masonry Standards Joint Committee (MSJC-08), Design of Reinforced Masonry Structures, second edition, presents the latest methods for designing strong, safe, and economical structures with reinforced masonry. The book is packed with more than 425 illustrations and a wealth of new, detailed examples. This state-of-the-art guide features strength design philosophy for reinforced masonry structures based on ASCE 7-05 design loads for wind and seismic design. Written by an internationally acclaimed author, this essential professional tool takes you step-by-step through the art, science, and engineering of reinforced masonry structures. COVERAGE INCLUDES: Masonry units and their applications Materials of masonry construction Flexural analysis and design Columns Walls under gravity and transverse loads Shear walls Retaining and subterranean walls General design and construction considerations Anchorage to masonry Design aids and tables
Download or read book Design of Modern Concrete Highway Bridges written by Conrad Heins and published by Wiley-Interscience. This book was released on 1984-01-20 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: A text/reference book describing the design of many types of concrete highway bridges. Using examples, the text examines the development of all required loads and the associated bridge design specifications. Details working stress and load factor methods. Includes design charts. Illustrates the design of box beam, segmental, T-Beams, prestressed, postensured, and pier beams. Explanations can be applied directly to design problems.
Download or read book Highway Bridge Superstructure Engineering written by Narendra Taly and published by CRC Press. This book was released on 2014-11-21 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: A How-To Guide for Bridge Engineers and Designers Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis provides a detailed discussion of traditional structural design perspectives, and serves as a state-of-the-art resource on the latest design and analysis of highway bridge superstructures. This book is applicable to highway bridges of all construction and material types, and is based on the load and resistance factor design (LRFD) philosophy. It discusses the theory of probability (with an explanation leading to the calibration process and reliability), and includes fully solved design examples of steel, reinforced and prestressed concrete bridge superstructures. It also contains step-by-step calculations for determining the distribution factors for several different types of bridge superstructures (which form the basis of load and resistance design specifications) and can be found in the AASHTO LRFD Bridge Design Specifications. Fully Realize the Basis and Significance of LRFD Specifications Divided into six chapters, this instructive text: Introduces bridge engineering as a discipline of structural design Describes numerous types of highway bridge superstructures systems Presents a detailed discussion of various types of loads that act on bridge superstructures and substructures Discusses the methods of analyses of highway bridge superstructures Includes a detailed discussion of reinforced and prestressed concrete bridges, and slab-steel girder bridges Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis can be used for teaching highway bridge design courses to undergraduate- and graduate-level classes, and as an excellent resource for practicing engineers.
Download or read book Design Guide for Composite Highway Bridges written by David C. Iles and published by CRC Press. This book was released on 2001-12-20 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite construction, using a reinforced concrete slab on top of steel girders, is an economical and popular form of construction for highway bridges. This book covers the design of continuous composite bridges, with both compact and non-compact sections, and simply supported composite bridges with the 'slab-on-beam' form of construction. Part One provides advice on the general considerations for design, the initial design process, and the verification of structural adequacy in accordance with BS 5400. The determination of design forces throughout the slab is described, and key features relating to slab design are identified. Advice on structural detailing is also given. Part Two provides worked examples for a four-span bridge, three-span bridge and for the deck slab of a simply supported bridge. Each example is presented as a series of calculation sheets, with accompanying commentary and advice given on facing pages. Design Guide for Composite Highway Bridges is a compilation of guidance previously given in separate SCI publications. As such it will act as an authoritative guide for new designers and as a reference text for the bridge design office.
Download or read book Load Rating Highway Bridges written by Lubin Gao and published by . This book was released on 2013-05-30 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: LOAD RATING HIGHWAY BRIDGES In accordance with Load and Resistance Factor Rating Method First Edition The first comprehensive text introducing the background theory along with the practical procedure of load rating highway bridges with the state-of-the-art Load and Resistance Factor Rating (LRFR) method. With its simplicity and complete contents on this subject, this is an indispensable text for both students and practicing engineers. The safety of bridges is essential to the traveling public. To ensure that bridges in our highway system function safely and serve properly, engineers need to inspect and assess the live load carrying capacity of the bridges. Based on the results of inspection and evaluation, decisions are made on load restriction, repair, retrofit or replacement. Load rating, one of the critical tasks in this decision-making process, uses either an analytical method or non-destructive load testing to determine the live load carrying capacity of a bridge. This is a book solely concentrated on bridge load rating by using analytical load rating methods, with a focus on the LRFR method. The primary purpose of this book is to provide the basic concept of load rating highway bridges in terms of the LRFR method. The target readers are practicing engineers who want to acquire fundamental knowledge of the LRFR method. Bearing that in mind, the author attempts to strike a balance between theory and how-to. Engineers who are conducting or will perform load ratings of bridges can use this text as a reference in supplement to the AASHTO Manual for Bridge Evaluation (MBE). This book can also serve as a textbook or supplemental material for a senior level undergraduate or graduate course in bridge design and load rating. This text is divided into three major sections. The first section contains a brief introduction to bridge load rating (Chapter 1) and fundamentals of structural failure and structural reliability theory (Chapter 2). After completing this section, re
Download or read book Design of Modern Highway Bridges written by Narendra Taly and published by McGraw-Hill Companies. This book was released on 1998 with total page 1376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to the theory and practice of designing modern highway bridge superstructures. Beginning with the history of bridges, it describes various types of bridge superstructures, materials of construction, bridge loadings, and analysis techniques for various types.
Download or read book Design of Highway Bridges written by Richard M. Barker and published by Wiley-Interscience. This book was released on 1997-03-17 with total page 1236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Highway Bridges provides a complete introduction to this important area of engineering, with comprehensive coverage of the theory, specifications, and procedures for the design of short- and medium-span bridges. Beginning with an overview of bridge engineering history, the book examines key bridge types, selection principles, and aesthetic considerations. Design issues are then discussed in detail, from limit states and loads to resistance factors and substructure design.
Download or read book Conveniences Sorely Needed written by Jon Axline and published by Montana Historical Society. This book was released on 2005 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although fast-disappearing, Montana's historic bridges are an integral and often overlooked part of Montana's landscape. This book tells the stories of those bridges and how they shaped the development of the Treasure State from the early horse-and-buggy days to the car culture of the post-World War II era.
Download or read book Overall Design of Bridges Design Manuals of Highway Bridges and Culverts written by Yousheng Jiang and published by . This book was released on 2021-06-30 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main contents of this book include: overview, planing study of bridge, technical standards and general layout, overall design of beam bridge, arch bridge, cable-stayed bridge, suspension bridge, composite structure bridge, environmental protection and landscaping design of bridge, bridge maintenance, monitoring and repair design , life cycle design and engineering risk analysis, etc.. It covers various aspects of bridge planning, design, construction, maintenance, etc., and introduces key technologies for the development of current bridges, which is very informative. It is highly instructive and practical, suitable for bridge construction personnel engaged in bridge planning, design, scientific research. It can also be used as a reference for teachers and students of related majors in universities and colleges.
Download or read book Bridge Engineering written by Demetrios E. Tonias and published by McGraw Hill Professional. This book was released on 2007 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at US audience - architects (113,000), civil engineers (228,000), and universities and colleges offering structural engineering programs. This work reflects the bridge design code changes and the newest ASCE [American Association of Civil Engineers] design methods. It uses SI units throughout for international usage.
Download or read book China Highway Canyon Bridges written by Zhendong Huang and published by Springer Nature. This book was released on 2021-11-23 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 108 canyon bridges that best represent the highest level of bridge construction in China and is divided into four chapters including suspension bridge, cable-stayed bridge, arch bridge and beam bridge. It introduces the definition of canyon bridge for the first time and gives an overview of each bridge's structural characteristics, design and construction techniques, as well as management and maintenance measures. Furthermore, this book provides elevation layout drawings and real view pictures. Chinese version of this book was awarded “Fan Lichu Book Prize” by Bridge and Structure Committee of China Civil Engineering Society in August 2020. It is the first book accounting of canyon bridges and appeals to a wide readership, from bridge designers and engineers to the general public who has interests to learn bridge construction in mountainous areas.
Download or read book Seismic Design of Highway Bridges written by Roy A. Imbsen and published by . This book was released on 1981 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Construction of Dams for Highway Bridges written by United States. Congress. House. Committee on Roads and published by . This book was released on 1946 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book State Trunk Highway Bridges written by and published by . This book was released on 1998 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Highway Bridges written by Richard M. Barker and published by John Wiley & Sons. This book was released on 2021-03-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest in bridge design and analysis—revised to reflect the eighth edition of the AASHTO LRFD specifications Design of Highway Bridges: An LRFD Approach, 4th Edition, offers up-to-date coverage of engineering fundamentals for the design of short- and medium-span bridges. Fully updated to incorporate the 8th Edition of the AASHTO Load and Resistance Factor Design Specifications, this invaluable resource offers civil engineering students and practitioners a a comprehensive introduction to the latest construction methods and materials in bridge design, including Accelerated Bridge Construction (ABC), ultra high-performance concrete (UHPC), and Practical 3D Rigorous Analysis. This updated Fourth Edition offers: Dozens of end-of-chapter worked problems and design examples based on the latest AASHTO LRFD Specifications. Access to a Solutions Manual and multiple bridge plans including cast-in-place, precast concrete, and steel multi-span available on the Instructor’s companion website From gaining base knowledge of the AASHTO LRFD specifications to detailed guidance on highway bridge design, Design of Highway Bridges is the one-stop reference for civil engineering students and a key study resource for those seeking engineering licensure through the Principles and Practice of Engineering (PE) exam.
Download or read book Alteration of Highway Bridges Over Navigable Waterways written by United States. Congress. House. Committee on Public Works and published by . This book was released on 1952 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
