Download or read book High Velocity Microparticles in Space written by Anatoly Belous and published by Springer. This book was released on 2019-01-28 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for readers the protection of electronic hardware in space vehicles from the negative effects of space dust and electromagnetic irradiation. The authors explain the mechanisms of “space dust” (high velocity particles in space), the effects on the on-board electronic hardware of space vehicles, and development of protection methods from these influences on humans, equipment and microcircuits. Coverage includes hard-to-find technical information on the design of special boosters for accelerating microparticles to space velocities, techniques for conducting experiments on Earth, data processing, and practical examples. The authors also discuss fabrication technologies and composition of special, radio absorbent materials for protecting space vehicles from the electromagnetic irradiation.
Download or read book High Velocity Microparticles in Space written by Anatoliĭ Ivanovich Belous and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for readers the protection of electronic hardware in space vehicles from the negative effects of space dust and electromagnetic irradiation. The authors explain the mechanisms of "space dust" (high velocity particles in space), the effects on the on-board electronic hardware of space vehicles, and development of protection methods from these influences on humans, equipment and microcircuits. Coverage includes hard-to-find technical information on the design of special boosters for accelerating microparticles to space velocities, techniques for conducting experiments on Earth, data processing, and practical examples. The authors also discuss fabrication technologies and composition of special, radio absorbent materials for protecting space vehicles from the electromagnetic irradiation. Provides a single-source reference on the effects on space vehicles of "space dust" and electromagnetic irradiation; Discusses the design of special boosters for acceleration of micro-particles to space velocities, for experimentation and testing on Earth; Includes information about fabrication technologies and composition of special, radio absorbent materials for protecting space vehicles from the electromagnetic irradiation
Download or read book Protection of Materials and Structures From the Space Environment written by Jacob Kleiman and published by Springer Science & Business Media. This book was released on 2012-09-22 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of the 10th International Space Conference on “Protection of Materials and Structures from Space Environment” ICPMSE-10J, since its inception in 1992, have been to facilitate exchanges between members of the various engineering and science disciplines involved in the development of space materials, including aspects of LEO, GEO and Deep Space environments, ground-based qualification, and in-flight experiments and lessons learned from operational vehicles that are closely interrelated to disciplines of the atmospheric sciences, solar-terrestrial interactions and space life sciences. The knowledge of environmental conditions on and around the Moon, Mars, Venus and the low Earth orbit as well as other possible candidates for landing such as asteroids have become an important issue, and protecting both hardware and human life from the effects of space environments has taken on a new meaning in light of the increased interest in space travel and colonization of other planets. And while many material experiments have been carried out on the ground and in open space in the last 50 years (LDEF, MEEP, SARE, MISSE, AOP, DSPSE, ESEM, EURECA, HST, MDIM, MIS, MPID, MPAC and SEED), many questions regarding the environmental impact of space on materials remain either poorly understood or unanswered. The coming generations of scientists will have to continue this work and tackle new challenges, continuing to build the level of confidence humans will need to continue the colonization of space. It is hoped that the proceedings of the ICPMSE-10J presented in this book will constitute a small contribution to doing so.
Download or read book Materials Engineering and Modern Manufacturing written by Regita Bendikiene and published by Trans Tech Publications Ltd. This book was released on 2021-06-30 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only
Download or read book Viruses Hardware and Software Trojans written by Anatoly Belous and published by Springer Nature. This book was released on 2020-06-27 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a valuable reference on cyber weapons and, in particular, viruses, software and hardware Trojans. The authors discuss in detail the most dangerous computer viruses, software Trojans and spyware, models of computer Trojans affecting computers, methods of implementation and mechanisms of their interaction with an attacker — a hacker, an intruder or an intelligence agent. Coverage includes Trojans in electronic equipment such as telecommunication systems, computers, mobile communication systems, cars and even consumer electronics. The evolutionary path of development of hardware Trojans from "cabinets", "crates" and "boxes" to the microcircuits (IC) is also discussed. Readers will benefit from the detailed review of the major known types of hardware Trojans in chips, principles of their design, mechanisms of their functioning, methods of their introduction, means of camouflaging and detecting, as well as methods of protection and counteraction.
Download or read book Space Microelectronics Volume 1 Modern Spacecraft Classification Failure and Electrical Component Requirements written by Anatoly Belous and published by Artech House. This book was released on 2017-06-30 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative first volume provides a solid understanding of modern spacecraft classification, failure, and electrical component requirements. This book focuses on the study of modern spacecraft, including their classification, packaging and protection, design versions, launch failure and accident analysis, and the main requirements of electronic components used. Readers find comprehensive coverage of the design and development of individual components as well as systems, their packaging, and how to make them last in space. This is a useful resource for military and civil applications. Specific topics include: The manufacturing of electronics for space; The main physical mechanisms of the impact of destabilizing factors of outer space, including various kinds of radiation, high-energy galactic icons, and particles of cosmic dust;The design of advanced space-grade microelectronic products such as memory microcircuits, microprocessors, interface and logic of microcircuits and power control microcircuits;Facts and features about the “space race” that have not been available until now.
Download or read book An Investigation of High velocity Impact Cratering Into Nonmetallic Targets and Correlation of Penetration Data for Metallic and Nonmetallic Targets written by William H. Kinard and published by . This book was released on 1961 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Symposium 13 15 September 1961 Hotel Westward Ho Phoenix Arizona July 1961 written by and published by . This book was released on 1961 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1985 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Factors Influencing Metals Applications in Space Vehicles written by J. M. Allen and published by . This book was released on 1960 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In space Technology Development Atomic Oxygen and Orbital Debris Effects written by James T. Visentine and published by . This book was released on 1989 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Note written by and published by . This book was released on 1965 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Define Universe and Give Two Examples written by Barton E. Dahneke and published by Barton Dahneke. This book was released on 2006 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerospace Polymeric Materials written by Inamuddin and published by John Wiley & Sons. This book was released on 2022-08-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses polymeric and composite materials for aerospace industries and discusses some general qualities of aviation materials, e.g., strength, density, malleability, ductility, elasticity, toughness, brittleness, fusibility, conductivity, and thermal expansion. Metals and alloys have so far been best able to utilize their qualities almost to the maximum. The latest advancements in polymers and composites have opened up a new area of conjecture about how to modify airplanes and shuttles to be more polymeric and less metallic. Polymeric materials have been the focus of exploration due to their high strength-to-weight ratio, low cost, and a greater degree of freedom in strengthening the needed qualities. Strength, density, malleability, ductility, elasticity, toughness, brittleness, fusibility, conductivity, and thermal expansion are some of the general qualities of aviation materials that are taken into account. Aerospace Polymeric Materials discusses a wide range of methods with an outline of polymeric and composite materials for aerospace applications. Among the range of topics discussed are aerogel properties; polymeric welding; polymeric reinforcement, their properties, and manufacturing; conducting polymer composites; electroactive polymeric composites; and polymer nanocomposite dielectrics. In addition, a summary of self-healing materials is also presented, including their significance, manufacturing methods, properties, and applications. Audience This is a useful guide for engineers, materials scientists, researchers, and postgraduate students from industry, academia, and laboratories that are linked to polymeric composites.
Download or read book Western Aviation Missiles and Space written by and published by . This book was released on 1963 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Protection of Materials and Structures from the Space Environment written by Jacob I. Kleiman and published by Springer Science & Business Media. This book was released on 2006-07-13 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of various space environment factors like atomic oxygen, vacuum ultraviolet radiation, charging, micrometeoroids, meteoroid showers, etc. on materials and structures in various orbits are discussed. In addition the ways to prevent these effects or reduce them through protection by coatings or modification of affected surfaces are considered in the book. The discussions on development of predictive models of material erosion that will allow the materials engineers and designers of future spacecraft to evaluate materials' behaviour is continued from the past meetings.
Download or read book Deep Impact as a World Observatory Event Synergies in Space Time and Wavelength written by Hans Ulrich Käufl and published by Springer Science & Business Media. This book was released on 2008-10-18 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the context of the NASA Deep Impact space mission, comet 9P/Tempel1 has been at the focus of an unprecedented worldwide long-term multi-wavelength observation campaign. The comet was also studied throughout its perihelion passage by various sources including the Deep Impact mission itself, the Hubble Space Telescope, Spitzer, Rosetta, XMM and all major ground-based observatories in a wavelength band from cm-wave radio astronomy to x-rays. This book includes the proceedings of a meeting that brought together an audience of theoreticians and observers - across the electromagnetic spectrum and from different sites and projects - to make full use of the massive ground-based observing data set. The coherent presentation of all data sets illustrates and examines the various observational constraints on modelling the cometary nucleus, cometary gas, cometary plasma, cometary dust, and the comet's surface and its activity.
