Download or read book High Throughput Iterative Decoders written by Engling Yeo and published by Kluwer Academic Publishers. This book was released on 2007-08-01 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Throughput Iterative Decoders: Towards Shannon Bound in VLSI addresses the algorithms and implementations of iterative decoders for error control in communication applications. The iterative codes are based on various concatenated schemes of convolutional codes, also known as turbo codes, and low density parity check (LDPC) codes. The decoding alogirthms are instances of message passing or belief propagation algorithms, which rely on the iterative cooperation between soft-decoding modules known as soft-input-Iterative decoding is a recent advacement in communication theory that is applicable to wireless, wireline, and optical communicatiosn systems. It promises significant advantage in bit-error rate (BER) performance at signal to noise ratios very close to the theoretical capacity bound. However, a direct mapping of the decoding algorithms leads to a multifold increase in the implementation complexity. As deep submicron technology matures, there is a possibility of implementing these applications that were once thought to be too complex to fit onto a single silicon die. We present the architectural and implementation issues related to the VLSI implementation of high throughput iterative decoders. The computational hardware and memory requirements of different competing architectures are discussed. This monograph also introduces reduced complexity modifications of algorithms that provide efficient mapping into architectures and VLSI implementations.
Download or read book High Throughput VLSI Architectures for Iterative Decoders written by Engling Yeo and published by . This book was released on 2003 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book THz Communications written by Thomas Kürner and published by Springer Nature. This book was released on 2021-12-07 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of THz communications, spanning the whole range of applications, propagation and channel models, RF transceiver technology, antennas, baseband techniques, and networking interfaces. The requested data rate in wireless communications will soon reach from 100 Gbit/s up to 1 Tbps necessitating systems with ultra-high bandwidths of several 10s of GHz which are available only above 200 GHz. In the last decade, research at these frequency bands has made significant progress, enabling mature experimental demonstrations of so-called THz communications, which are thus expected to play a vital role in future wireless networks. In addition to chapters by leading experts on the theory, modeling, and implementation of THz communication technology, the book also features the latest experimental results and addresses standardization and regulatory aspects. This book will be of interest to both academic researchers and engineers in the telecommunications industry.
Download or read book Advances in Computing and Communications Part II written by Ajith Abraham and published by Springer. This book was released on 2011-07-08 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the second part of a four-volume set (CCIS 190, CCIS 191, CCIS 192, CCIS 193), which constitutes the refereed proceedings of the First International Conference on Computing and Communications, ACC 2011, held in Kochi, India, in July 2011. The 72 revised full papers presented in this volume were carefully reviewed and selected from a large number of submissions. The papers are organized in topical sections on database and information systems; distributed software development; human computer interaction and interface; ICT; internet and Web computing; mobile computing; multi agent systems; multimedia and video systems; parallel and distributed algorithms; security, trust and privacy.
Download or read book Advanced Hardware Design for Error Correcting Codes written by Cyrille Chavet and published by Springer. This book was released on 2014-10-30 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides thorough coverage of error correcting techniques. It includes essential basic concepts and the latest advances on key topics in design, implementation, and optimization of hardware/software systems for error correction. The book’s chapters are written by internationally recognized experts in this field. Topics include evolution of error correction techniques, industrial user needs, architectures, and design approaches for the most advanced error correcting codes (Polar Codes, Non-Binary LDPC, Product Codes, etc). This book provides access to recent results, and is suitable for graduate students and researchers of mathematics, computer science, and engineering. • Examines how to optimize the architecture of hardware design for error correcting codes; • Presents error correction codes from theory to optimized architecture for the current and the next generation standards; • Provides coverage of industrial user needs advanced error correcting techniques. Advanced Hardware Design for Error Correcting Codes includes a foreword by Claude Berrou.
Download or read book Electronics for Microwave Backhaul written by Vittorio Camarchia and published by Artech House. This book was released on 2016-03-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely new resource presents an overview of the electronics of mobile network backhaul. Infrastructure planning, architecture evolution, digital controls, and countermeasures are all presented highlighting the building blocks of specific backhaul features. Tx and Rx design and antenna requirements and covered while examining the overall construction of the microwave radio hardware blocks. Single blocks are explored: the antenna, the analog transmitter and receiver, and the modem, recalling the most important aspects of transport networks and microwave link dimensioning. Essential theory is provided for each hardware block with an emphasis on present solutions. Authored by academic and industrial experts in the field, development and design engineers will benefit from the practical guidance in solving realistic issues and providing useful tips throughout the design process. This book guides readers through the historical evolution of microwave radios and the components of the next generation of mobile networks.
Download or read book Computer Engineering and Technology written by Weixia Xu and published by Springer. This book was released on 2015-02-26 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 18th National Conference on Computer Engineering and Technology, NCCET 2014, held in Guiyang, China, during July/August 2014. The 18 papers presented were carefully reviewed and selected from 85 submissions. They are organized in topical sections on processor architecture; computer application and software optimization; technology on the horizon.
Download or read book Multi Processor System on Chip 2 written by and published by John Wiley & Sons. This book was released on 2021-03-31 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Multi-Processor System-on-Chip (MPSoC) is the key component for complex applications. These applications put huge pressure on memory, communication devices and computing units. This book, presented in two volumes – Architectures and Applications – therefore celebrates the 20th anniversary of MPSoC, an interdisciplinary forum that focuses on multi-core and multi-processor hardware and software systems. It is this interdisciplinarity which has led to MPSoC bringing together experts in these fields from around the world, over the last two decades. Multi-Processor System-on-Chip 2 covers application-specific MPSoC design, including compilers and architecture exploration. This second volume describes optimization methods, tools to optimize and port specific applications on MPSoC architectures. Details on compilation, power consumption and wireless communication are also presented, as well as examples of modeling frameworks and CAD tools. Explanations of specific platforms for automotive and real-time computing are also included.
Download or read book Iterative Error Correction written by Sarah J. Johnson and published by Cambridge University Press. This book was released on 2010 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents all of the key ideas needed to understand, design, implement and analyse iterative-based error correction schemes.
Download or read book Algorithms and VLSI Implementations of MIMO Detection written by Ibrahim A. Bello and published by Springer Nature. This book was released on 2022-07-22 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed overview of detection algorithms for multiple-input multiple-output (MIMO) communications systems focusing on their hardware realisation. The book begins by analysing the maximum likelihood detector, which provides the optimal bit error rate performance in an uncoded communications system. However, the maximum likelihood detector experiences a high complexity that scales exponentially with the number of antennas, which makes it impractical for real-time communications systems. The authors proceed to discuss lower-complexity detection algorithms such as zero-forcing, sphere decoding, and the K-best algorithm, with the aid of detailed algorithmic analysis and several MATLAB code examples. Furthermore, different design examples of MIMO detection algorithms and their hardware implementation results are presented and discussed. Finally, an ASIC design flow for implementing MIMO detection algorithms in hardware is provided, including the system simulation and modelling steps and register transfer level modelling using hardware description languages. Provides an overview of MIMO detection algorithms and discusses their corresponding hardware implementations in detail; Highlights architectural considerations of MIMO detectors in achieving low power consumption and high throughput; Discusses design tradeoffs that will guide readers’ efforts when implementing MIMO algorithms in hardware; Describes a broad range of implementations of different MIMO detectors, enabling readers to make informed design decisions based on their application requirements.
Download or read book Springer Handbook of Optical Networks written by Biswanath Mukherjee and published by Springer Nature. This book was released on 2020-10-15 with total page 1169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an authoritative, comprehensive reference on optical networks, the backbone of today’s communication and information society. The book reviews the many underlying technologies that enable the global optical communications infrastructure, but also explains current research trends targeted towards continued capacity scaling and enhanced networking flexibility in support of an unabated traffic growth fueled by ever-emerging new applications. The book is divided into four parts: Optical Subsystems for Transmission and Switching, Core Networks, Datacenter and Super-Computer Networking, and Optical Access and Wireless Networks. Each chapter is written by world-renown experts that represent academia, industry, and international government and regulatory agencies. Every chapter provides a complete picture of its field, from entry-level information to a snapshot of the respective state-of-the-art technologies to emerging research trends, providing something useful for the novice who wants to get familiar with the field to the expert who wants to get a concise view of future trends.
Download or read book Channel Coding Theory Algorithms and Applications written by and published by Academic Press. This book was released on 2014-07-29 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a review of the principles, methods and techniques of important and emerging research topics and technologies in Channel Coding, including theory, algorithms, and applications. Edited by leading people in the field who, through their reputation, have been able to commission experts to write on a particular topic. With this reference source you will: Quickly grasp a new area of research Understand the underlying principles of a topic and its applications Ascertain how a topic relates to other areas and learn of the research issues yet to be resolved Quick tutorial reviews of important and emerging topics of research in Channel Coding Presents core principles in Channel Coding theory and shows their applications Reference content on core principles, technologies, algorithms and applications Comprehensive references to journal articles and other literature on which to build further, more specific and detailed knowledge
Download or read book Resource Efficient LDPC Decoders written by Vikram Arkalgud Chandrasetty and published by Academic Press. This book was released on 2017-12-15 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes a practical hands-on approach to developing low complexity algorithms and transforming them into working hardware. It follows a complete design approach – from algorithms to hardware architectures - and addresses some of the challenges associated with their design, providing insight into implementing innovative architectures based on low complexity algorithms. The reader will learn: Modern techniques to design, model and analyze low complexity LDPC algorithms as well as their hardware implementation How to reduce computational complexity and power consumption using computer aided design techniques All aspects of the design spectrum from algorithms to hardware implementation and performance trade-offs Provides extensive treatment of LDPC decoding algorithms and hardware implementations Gives a systematic guidance, giving a basic understanding of LDPC codes and decoding algorithms and providing practical skills in implementing efficient LDPC decoders in hardware Companion website containing C-Programs and MATLAB models for simulating the algorithms, and Verilog HDL codes for hardware modeling and synthesis
Download or read book Turbo like Codes written by Aliazam Abbasfar and published by Springer Science & Business Media. This book was released on 2007-09-09 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces turbo error correcting concept in a simple language, including a general theory and the algorithms for decoding turbo-like code. It presents a unified framework for the design and analysis of turbo codes and LDPC codes and their decoding algorithms. A major focus is on high speed turbo decoding, which targets applications with data rates of several hundred million bits per second (Mbps).
Download or read book Architectures for Baseband Signal Processing written by Frank Kienle and published by Springer Science & Business Media. This book was released on 2013-08-15 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses challenges faced by both the algorithm designer and the chip designer, who need to deal with the ongoing increase of algorithmic complexity and required data throughput for today’s mobile applications. The focus is on implementation aspects and implementation constraints of individual components that are needed in transceivers for current standards, such as UMTS, LTE, WiMAX and DVB-S2. The application domain is the so called outer receiver, which comprises the channel coding, interleaving stages, modulator, and multiple antenna transmission. Throughout the book, the focus is on advanced algorithms that are actually in use in modern communications systems. Their basic principles are always derived with a focus on the resulting communications and implementation performance. As a result, this book serves as a valuable reference for two, typically disparate audiences in communication systems and hardware design.
Download or read book Error Control Coding for B3G 4G Wireless Systems written by Thierry Lestable and published by John Wiley & Sons. This book was released on 2011-03-10 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the fast evolving area of advanced coding, Error Control Coding for B3G/4G Wireless Systems targets IMT-Advanced systems to present the latest findings and implementation solutions. The book begins by detailing the fundamentals of advanced coding techniques such as Coding, Decoding, Design, and Optimization. It provides not only state-of-the-art research findings in 3D Turbo-codes, non-binary LDPC Codes, Fountain, and Raptor codes, but also insights into their real-world implementation by examining hardware architecture solutions, for example VLSI complexity, FPGA, and ASIC. Furthermore, special attention is paid to Incremental redundancy techniques, which constitute a key feature of Wireless Systems. A promising application of these advanced coding techniques, the Turbo-principle (also known as iterative processing), is illustrated through an in-depth discussion of Turbo-MIMO, Turbo-Equalization, and Turbo-Interleaving techniques. Finally, the book presents the status of major standardization activities currently implementing such techniques, with special interest in 3GPP UMTS, LTE, WiMAX, IEEE 802.11n, DVB-RCS, DVB-S2, and IEEE 802.22. As a result, the book coherently brings together academic and industry vision by providing readers with a uniquely comprehensive view of the whole topic, whilst also giving an understanding of leading-edge techniques. Includes detailed coverage of coding, decoding, design, and optimization approaches for advanced codes Provides up to date research findings from both highly reputed academics and industry standpoints Presents the latest status of standardization activities for Wireless Systems related to advanced coding Describes real-world implementation aspects by giving insights into architecture solutions for both LDPC and Turbo-codes Examines the most advanced and promising concepts of turbo-processing applications: Turbo-MIMO, Turbo-Equalization, Turbo-Interleaving
Download or read book Reconfigurable Logic written by Pierre-Emmanuel Gaillardon and published by CRC Press. This book was released on 2018-09-03 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last three decades, reconfigurable logic has been growing steadily and can now be found in many different fields. Field programmable gate arrays (FPGAs) are one of the most famous architecture families of reconfigurable devices. FPGAs can be seen as arrays of logic units that can be reconfigured to realize any digital systems. Their high versatility has enabled designers to drastically reduce time to market, and made FPGAs suitable for prototyping or small production series in many branches of industrial products. In addition, and thanks to innovations at the architecture level, FPGAs are now conquering segments of mass markets such as mobile communications. Reconfigurable Logic: Architecture, Tools, and Applications offers a snapshot of the state of the art of reconfigurable logic systems. Covering a broad range of architectures, tools, and applications, this book: Explores classical FPGA architectures and their supporting tools Evaluates recent proposals related to FPGA architectures, including the use of network-on-chips (NoCs) Examines reconfigurable processors that merge concepts borrowed from the reconfigurable domain into processor design Exploits FPGAs for high-performance systems, efficient error correction codes, and high-bandwidth network routers with built-in security Expounds on emerging technologies to enhance FPGA architectures, improve routing structures, and create non-volatile configuration flip-flops Reconfigurable Logic: Architecture, Tools, and Applications reviews current trends in reconfigurable platforms, providing valuable insight into the future potential of reconfigurable systems.
