Download or read book High Temperature Thermal Storage Systems Using Phase Change Materials written by Luisa F. Cabeza and published by Academic Press. This book was released on 2017-11-27 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Temperature Thermal Storage Systems Using Phase Change Materials offers an overview of several high-temperature phase change material (PCM) thermal storage systems concepts, developed by several well-known global institutions with increasing interest in high temperature PCM applications such as solar cooling, waste heat and concentrated solar power (CSP). The book is uniquely arranged by concepts rather than categories, and includes advanced topics such as thermal storage material packaging, arrangement of flow bed, analysis of flow and heat transfer in the flow bed, energy storage analysis, storage volume sizing and applications in different temperature ranges. By comparing the varying approaches and results of different research centers and offering state-of-the-art concepts, the authors share new and advanced knowledge from researchers all over the world. This reference will be useful for researchers and academia interested in the concepts and applications and different techniques involved in high temperature PCM thermal storage systems. Offers coverage of several high temperature PCM thermal storage systems concepts developed by several leading research institutions Provides new and advanced knowledge from researchers all over the world Includes a base of material properties throughout

Download or read book Thermal Energy Storage Using Phase Change Materials written by Amy S. Fleischer and published by Springer. This book was released on 2015-06-22 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive introduction to the use of solid‐liquid phase change materials to store significant amounts of energy in the latent heat of fusion. The proper selection of materials for different applications is covered in detail, as is the use of high conductivity additives to enhance thermal diffusivity. Dr. Fleischer explores how applications of PCMS have expanded over the past 10 years to include the development of high efficiency building materials to reduce heating and cooling needs, smart material design for clothing, portable electronic systems thermal management, solar thermal power plant design and many others. Additional future research directions and challenges are also discussed.

Download or read book Heat and cold storage with PCM written by Harald Mehling and published by Springer Science & Business Media. This book was released on 2008-08-15 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The years 2006 and 2007 mark a dramatic change of peoples view regarding c- mate change and energy consumption. The new IPCC report makes clear that - mankind plays a dominant role on climate change due to CO emissions from en- 2 ergy consumption, and that a significant reduction in CO emissions is necessary 2 within decades. At the same time, the supply of fossil energy sources like coal, oil, and natural gas becomes less reliable. In spring 2008, the oil price rose beyond 100 $/barrel for the first time in history. It is commonly accepted today that we have to reduce the use of fossil fuels to cut down the dependency on the supply countries and to reduce CO emissions. The use of renewable energy sources and 2 increased energy efficiency are the main strategies to achieve this goal. In both strategies, heat and cold storage will play an important role. People use energy in different forms, as heat, as mechanical energy, and as light. With the discovery of fire, humankind was the first time able to supply heat and light when needed. About 2000 years ago, the Romans started to use ceramic tiles to store heat in under floor heating systems. Even when the fire was out, the room stayed warm. Since ancient times, people also know how to cool food with ice as cold storage.

Download or read book Advanced Phase Change Materials for Thermal Storage written by Rocío Bayón and published by MDPI. This book was released on 2021-08-30 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal energy storage using phase change materials (PCMs) is a research topic that has attracted much attention in recent decades. This is mainly due to the potential use of PCMs as latent storage media in a large variety of applications. Although many kinds of PCMs are already commercial products, advanced materials with improved properties and new latent storage concepts are required to better meet the specific requirements of different applications. Moreover, the development of common validation procedures for PCMs is an important issue that should be addressed in order to achieve commercial deployment and implementation of these kinds of materials in latent storage systems. The key subjects addressed on the five papers included in this Special Issue are related to methodologies for material selection, PCM validation and assessment procedures, innovative approaches of PCM applications together with simulation and testing of latent storage prototypes.

Download or read book Thermal Energy Storage with Phase Change Materials written by Mohammed Farid and published by CRC Press. This book was released on 2021-07-25 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on latent heat storage, which is one of the most efficient ways of storing thermal energy. Unlike the sensible heat storage method, the latent heat storage method provides much higher storage density with a smaller difference between storing and releasing temperatures. Thermal Energy Storage with Phase Change Materials is structured into four chapters that cover many aspects of thermal energy storage and their practical applications. Chapter 1 reviews selection, performance, and applications of phase change materials. Chapter 2 investigates mathematical analyses of phase change processes. Chapters 3 and 4 present passive and active applications for energy saving, peak load shifting, and price-based control heating using phase change materials. These chapters explore the hot topic of energy saving in an overarching way, and so they are relevant to all courses. This book is an ideal research reference for students at the postgraduate level. It also serves as a useful reference for electrical, mechanical, and chemical engineers and students throughout their work. FEATURES Explains the technical principles of thermal energy storage, including materials and applications in different classifications Provides fundamental calculations of heat transfer with phase change Discusses the benefits and limitations of different types of phase change materials (PCM) in both micro- and macroencapsulations Reviews the mechanisms and applications of available thermal energy storage systems Introduces innovative solutions in hot and cold storage applications

Download or read book High Temperature Phase Change Materials for Thermal Energy Storage Applications written by and published by . This book was released on 2011 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: To store thermal energy, sensible and latent heat storage materials are widely used. Latent heat thermal energy storage (TES) systems using phase change materials (PCM) are useful because of their ability to charge and discharge a large amount of heat from a small mass at constant temperature during a phase transformation. Molten salt PCM candidates for cascaded PCMs were evaluated for the temperatures near 320, 350, and 380 degrees C. These temperatures were selected to fill the 300 to 400 degrees C operating range typical for parabolic trough systems, that is, as one might employ in three-PCM cascaded thermal storage. Based on the results, the best candidate for temperatures near 320 degrees C was the molten salt KNO3-4.5wt%KCl. For the 350 and 380 degrees C temperatures, the evaluated molten salts are not good candidates because of the corrosiveness and the high vapor pressure of the chlorides.

Download or read book Thermal Energy Storage written by Ibrahim Dinçer and published by John Wiley & Sons. This book was released on 2011-06-24 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of thermal energy storage (TES) systems to facilitate energy savings, renewable energy use and reduce environmental impact has led to a recent resurgence in their interest. The second edition of this book offers up-to-date coverage of recent energy efficient and sustainable technological methods and solutions, covering analysis, design and performance improvement as well as life-cycle costing and assessment. As well as having significantly revised the book for use as a graduate text, the authors address real-life technical and operational problems, enabling the reader to gain an understanding of the fundamental principles and practical applications of thermal energy storage technology. Beginning with a general summary of thermodynamics, fluid mechanics and heat transfer, this book goes on to discuss practical applications with chapters that include TES systems, environmental impact, energy savings, energy and exergy analyses, numerical modeling and simulation, case studies and new techniques and performance assessment methods.

Download or read book Ultra High Temperature Thermal Energy Storage Transfer and Conversion written by Alejandro Datas and published by Woodhead Publishing. This book was released on 2020-09-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-High Temperature Thermal Energy Storage, Transfer and Conversion presents a comprehensive analysis of thermal energy storage systems operating at beyond 800°C. Editor Dr. Alejandro Datas and his team of expert contributors from a variety of regions summarize the main technological options and the most relevant materials and characterization considerations to enable the reader to make the most effective and efficient decisions.This book helps the reader to solve the very specific challenges associated with working within an ultra-high temperature energy storage setting. It condenses and summarizes the latest knowledge, covering fundamentals, device design, materials selection and applications, as well as thermodynamic cycles and solid-state devices for ultra-high temperature energy conversion.This book provides a comprehensive and multidisciplinary guide to engineers and researchers in a variety of fields including energy conversion, storage, cogeneration, thermodynamics, numerical methods, CSP, and materials engineering. It firstly provides a review of fundamental concepts before exploring numerical methods for fluid-dynamics and phase change materials, before presenting more complex elements such as heat transfer fluids, thermal insulation, thermodynamic cycles, and a variety of energy conversation methods including thermophotovoltaic, thermionic, and combined heat and power. Reviews the main technologies enabling ultra-high temperature energy storage and conversion, including both thermodynamic cycles and solid-state devices Includes the applications for ultra-high temperature energy storage systems, both in terrestrial and space environments Analyzes the thermophysical properties and relevant experimental and theoretical methods for the analysis of high-temperature materials

Download or read book Phase Change Materials and Their Applications written by Mohsen Mhadhbi and published by BoD – Books on Demand. This book was released on 2018-08-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, the application of phase change materials (PCMs) has developed in different industries, including the solar cooling and solar power plants, photovoltaic electricity systems, the space industry, waste heat recovery systems, preservation of food and pharmaceutical products, and domestic hot water. PCMs use the principle of latent heat thermal storage to absorb energy in large quantities when there is a surplus and release it when there is a deficit. This promising technology has already been successfully implemented in many construction projects. The aim of this book is to assist the scientists and to provide the reader with a comprehensive overview of the properties that characterize the phase change materials from theoretical and experimental perspectives with a focus on their technological applications. The present status and future perspectives of phase change material are discussed.

Download or read book Advances in Concentrating Solar Thermal Research and Technology written by Manuel Blanco and published by Woodhead Publishing. This book was released on 2016-11-10 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: After decades of research and development, concentrating solar thermal (CST) power plants (also known as concentrating solar power (CSP) and as Solar Thermal Electricity or STE systems) are now starting to be widely commercialized. Indeed, the IEA predicts that by 2050, with sufficient support over ten percent of global electricity could be produced by concentrating solar thermal power plants. However, CSP plants are just but one of the many possible applications of CST systems. Advances in Concentrating Solar Thermal Research and Technology provides detailed information on the latest advances in CST systems research and technology. It promotes a deep understanding of the challenges the different CST technologies are confronted with, of the research that is taking place worldwide to address those challenges, and of the impact that the innovation that this research is fostering could have on the emergence of new CST components and concepts. It is anticipated that these developments will substantially increase the cost-competiveness of commercial CST solutions and reshape the technological landscape of both CST technologies and the CST industry. After an introductory chapter, the next three parts of the book focus on key CST plant components, from mirrors and receivers to thermal storage. The final two parts of the book address operation and control and innovative CST system concepts. Contains authoritative reviews of CST research taking place around the world Discusses the impact this research is fostering on the emergence of new CST components and concepts that will substantially increase the cost-competitiveness of CST power Covers both major CST plant components and system-wide issues

Download or read book Solar Thermal Energy Storage written by H.P. Garg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Storage not only plays an important role in conservinq the energy but also improves the performance and reliability of a wide range of energy systems. Energy storagp. leads to saving of premium fuels and makes the system morA cost effective by reducing the wastage of energy. In most systems there is a mismatch between the energy supply and energy demand. The energy storage can even out this imbalance and thereby help in savings of capital costs. Enerqy storage is all the more important where the enerqy source is intermittent such as Solar Energy. The use of jntermittent energy sources is likely to grow. If more and more solar energy is to be used for domestic and industrial applications then energy storage is very crucial. If no storage is used in solar energy systems then the major part of the energy demand will be met by the back-up or auxiliary energy and therefore the so called annual solar load fract]on will be very low. In case of solar energy, both short term and long term energy storage systems can be used whjch can adjust the phase difference between solar energy supply and energy demand and can match seasonal demands to the solar availability respectively. Thermal energy storage can lead to capital cost savings, fuel savjngs, and fuel substitution in many application areas. Developing an optimum thermal storaqe system is as important an area of research as developinq an alternative source of energy.

Download or read book Efficient Phase Change Materials written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: HEATS Project: USF is developing low-cost, high-temperature phase-change materials (PCMs) for use in thermal energy storage systems. Heat storage materials are critical to the energy storage process. In solar thermal storage systems, heat can be stored in these materials during the day and released at night--when the sun is not out--to drive a turbine and produce electricity. In nuclear storage systems, heat can be stored in these materials at night and released to produce electricity during daytime peak-demand hours. Most PCMs do not conduct heat very well. Using an innovative, electroless encapsulation technique, USF is enhancing the heat transfer capability of its PCMs. The inner walls of the capsules will be lined with a corrosion-resistant, high-infrared emissivity coating, and the absorptivity of the PCM will be controlled with the addition of nano-sized particles. USF's PCMs remain stable at temperatures from 600 to 1,000°C and can be used for solar thermal power storage, nuclear thermal power storage, and other applications.

Download or read book Advances in Thermal Energy Storage Systems written by Luisa F. Cabeza and published by Elsevier. This book was released on 2014-10-31 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal energy storage (TES) technologies store thermal energy (both heat and cold) for later use as required, rather than at the time of production. They are therefore important counterparts to various intermittent renewable energy generation methods and also provide a way of valorising waste process heat and reducing the energy demand of buildings. This book provides an authoritative overview of this key area. Part one reviews sensible heat storage technologies. Part two covers latent and thermochemical heat storage respectively. The final section addresses applications in heating and energy systems. Reviews sensible heat storage technologies, including the use of water, molten salts, concrete and boreholes Describes latent heat storage systems and thermochemical heat storage Includes information on the monitoring and control of thermal energy storage systems, and considers their applications in residential buildings, power plants and industry

Download or read book Recent Advancements in Materials and Systems for Thermal Energy Storage written by Andrea Frazzica and published by Springer. This book was released on 2018-08-28 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in thermal energy storage development at both the materials and systems level. It covers various fields of application, including domestic, industrial and transport, as well as diverse technologies, such as sensible, latent and thermochemical. The contributors introduce readers to the main performance indicators for thermal storage systems, and discuss thermal energy storage (TES) technologies that can be used to improve the efficiency of energy systems and increase the share of renewable energy sources in numerous fields of application. In addition to the latest advances, the authors discuss the development and characterization of advanced materials and systems for sensible, latent and thermochemical TES, as well as the TES market and practical applications. They also report on and assess the feasibility of uniform characterization protocols and main performance indicators, compared to previous attempts to be found in the literature. The book will help to increase awareness of thermal energy storage technologies in both the academic and industrial sectors, while also providing experts new tools to achieve a uniform approach to thermal energy storage characterization methods. It will also be of interest to all students and researchers seeking an introduction to recent innovations in TES technologies.

Download or read book Thermal Energy Storage written by Ibrahim Dincer and published by John Wiley & Sons. This book was released on 2002-04-29 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades many research and development activities related to energy have concentrated on efficient energy use and energy savings and conservation. In this regard, Thermal Energy Storage (TES) systems can play an important role, as they provide great potential for facilitating energy savings and reducing environmental impact. Thermal storage has received increasing interest in recent years in terms of its applications, and the enormous potential it offers both for more effective use of thermal equipment and for economic, large-scale energy substitutions. Indeed, TES appears to provide one of the most advantageous solutions for correcting the mismatch that often occurs between the supply and demand of energy. Despite this increase in attention, no book is currently available which comprehensively covers TES. Presenting contributions from prominent researchers and scientists, this book is primarily concerned with TES systems and their applications. It begins with a brief summary of general aspects of thermodynamics, fluid mechanics and heat transfer, and then goes on to discuss energy storage technologies, environmental aspects of TES, energy and exergy analyses, and practical applications. Furthermore, this book provides coverage of the theoretical, experimental and numerical techniques employed in the field of thermal storage. Numerous case studies and illustrative examples are included throughout. Some of the unique features of this book include: * State-of-the art descriptions of many facets of TES systems and applications * In-depth coverage of exergy analysis and thermodynamic optimization of TES systems * Extensive new material on TES technologies, including advances due to innovations in sensible- and latent-energy storage * Key chapters on environmental issues, sustainable development and energy savings * Extensive coverage of practical aspects of the design, evaluation, selection and implementation of TES systems * Wide coverage of TES-system modelling, ranging in level from elementary to advanced * Abundant design examples, case studies and references In short, this book forms a valuable reference resource for practicing engineers and researchers, and a research-oriented text book for advanced undergraduate and graduate students of various engineering disciplines. Instructors will find that its breadth and structure make it an ideal core text for TES and related courses.

Download or read book Energy and Sustainable Futures written by Iosif Mporas and published by Springer Nature. This book was released on 2021-04-29 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents papers displayed in the 2nd International Conference on Energy and Sustainable Futures (ICESF 2020), co-organised by the University of Hertfordshire and the University Alliance DTA in Energy. The research included in this book covers a wide range of topics in the areas of energy and sustainability including: • ICT and control of energy;• conventional energy sources;• energy governance;• materials in energy research;• renewable energy; and• energy storage. The book offers a holistic view of topics related to energy and sustainability, making it of interest to experts in the field, from industry and academia.

Download or read book Advanced Heat and Mass Transfer written by Amir Faghri and published by Global Digital Press. This book was released on 2010 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: All relevant advanced heat and mass transfer topics in heat conduction, convection, radiation, and multi-phase transport phenomena, are covered in a single textbook, and are explained from a fundamental point of view.