Download or read book High Temperature Superconducting Devices for Energy Applications written by Raja Sekhar Dondapati and published by CRC Press. This book was released on 2020-10-21 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel concepts in the development of high-temperature superconducting (HTS) devices and discusses the technologies involved in producing efficient and economically feasible energy technologies around the world. High-Temperature Superconducting Devices for Energy Application covers the application of high-temperature superconductors in clean energy production and allied cooling technologies. In addition, it presents the compatibility of other materials involved in the construction of various devices at cryogenic temperatures. It also summarizes superconducting fault current limiters (SFCL) and related grid stabilization. The book addresses the need to lower the losses incurred with efficient power transmission. The aim of this book is to serve the needs of industry professionals, researchers, and doctoral students studying energy technologies. Features Discusses the history of the development of high-temperature superconductors Covers cryogenic cooling technologies adapted for various superconducting devices Presents a detailed design of superconducting generators Highlights the importance of superconducting magnetic energy storage (SMES) devices in the power grid Focuses on theoretical computations

Download or read book Applications of High Temperature Superconductors to Electric Power Equipment written by Swarn S. Kalsi and published by John Wiley & Sons. This book was released on 2011-04-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only one-stop reference to design, analysis, and manufacturing concepts for power devices utilizing HTS. High temperature superconductors (HTS) have been used for building many devices for electric grids worldwide and for large ship propulsion motors for the U.S. Navy. And yet, there has been no single source discussing theory and design issues relating to power applications of HTS—until now. This book provides design and analysis for various devices and includes examples of devices built over the last decade. Starting with a complete overview of HTS, the subsequent chapters are dedicated to specific devices: cooling and thermal insulation systems; rotating AC and DC machines; transformers; fault current limiters; power cables; and Maglev transport. As applicable, each chapter provides a history of the device, principles, configuration, design and design challenges, prototypes, and manufacturing issues, with each ending with a summary of the material covered. The design analysis and design examples provide critical insight for readers to successfully design their own devices. Original equipment manufacturer (OEM) designers, industry and utilities users, universities and defense services research groups, and senior/postgraduate engineering students and instructors will rely on this resource. "HTS technology reduces electric losses and increases the efficiency of power equipment. This book by Swarn Kalsi, a leading expert on the HTS subject, provides a survey of the HTS technology and the design rules, performance analyses, and manufacturing concepts for power application-related devices. It compares conventional and HTS technology approaches for device design and provides significant examples of devices utilizing the HTS technology today. The book is useful for a broad spectrum of professionals worldwide: students, teaching staff, and OEM designers as well as users in industry and electric utilities." —Professor Dr. Rolf Hellinger, Research and Technologies Corporate Technology, Siemens AG

Download or read book High Temperature Superconductors HTS for Energy Applications written by Ziad Melhem and published by Elsevier. This book was released on 2011-12-21 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature superconductors (HTS) offer many advantages through their application in electrical systems, including high efficiency performance and high throughput with low-electrical losses. While cryogenic cooling and precision materials manufacture is required to achieve this goal, cost reductions without significant performance loss are being achieved through the advanced design and development of HTS wires, cables and magnets, along with improvements in manufacturing methods. This book explores the fundamental principles, design and development of HTS materials and their practical applications in energy systems. Part one describes the fundamental science, engineering and development of particular HTS components such as wires and tapes, cables, coils and magnets and discusses the cryogenics and electromagnetic modelling of HTS systems and materials. Part two reviews the types of energy applications that HTS materials are used in, including fault current limiters, power cables and energy storage, as well as their application in rotating machinery for improved electrical efficiencies, and in fusion technologies and accelerator systems where HTS magnets are becoming essential enabling technologies. With its distinguished editor and international team of expert contributors, High temperature superconductors (HTS) for energy applications is an invaluable reference tool for anyone involved or interested in HTS materials and their application in energy systems, including materials scientists and electrical engineers, energy consultants, HTS materials manufacturers and designers, and researchers and academics in this field. Discusses fundamental issues and developments of particular HTS components Comprehensively reviews the design and development of HTS materials and then applications in energy systems Reviews the use of HTS materials and cabling transmissions, fault alignment limiters, energy storage, generators and motors, fusion and accelerator

Download or read book High Temperature Superconductivity 2 written by Anant V. Narlikar and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.

Download or read book High Temperature Superconductors written by Raghu N. Bhattacharya and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential reference provides the most comprehensive presentation of state-of-the-art research being conducting worldwide today in this growing field of research and applications. HTS are currently being supported by numerous governmental and industrial initiatives in the USA and Asia and Europe to overcome energy distribution issues and are now being commercialised for power-delivery devices, such as power transmission lines and cables, motors, and generators. Applications in electric utilities include energy-storing devices to help industries avoid dips in electric power, current limiters, and long transmission lines. The technology is particularly thought out for highly-populated and densed areas. Both editors are leading experts in the field from the National Renewable Energy Laboratory and the Oak Ridge National Laboratory. This book can be used as a companion teaching tool, and also as as a research and professional reference.

Download or read book Energy Applications of High temperature Superconductivity written by Steinar J. Dale and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Superconductivity 1 written by A. V. Narlikar and published by Springer Science & Business Media. This book was released on 2004 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.

Download or read book High Temperature Superconducting Magnetic Energy Storage Systems and Applications written by Jian Xun Jin and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Superconducting Materials Science and Engineering written by Donglu Shi and published by Elsevier. This book was released on 1995-02-20 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the fascinating field of high-temperature superconductivity. Basic concepts–including experimental techniques and theoretical issues–are discussed in a clear, systematic manner. In addition, the most recent research results in the measurements, materials synthesis and processing, and characterization of physical properties of high-temperature superconductors are presented. Researchers and students alike can use this book as a comprehensive introduction not only to superconductivity but also to materials-related research in electromagnetic ceramics. Special features of the book: presents recent developments in vortex-state properties, defects characterization, and phase equilibrium introduces basic concepts for experimental techniques at low temperatures and high magnetic fields provides a valuable reference for materials-related research discusses potential industrial applications of high-temperature superconductivity includes novel processing technologies for thin film and bulk materials suggests areas of research and specific problems whose solution can make high-Tc superconductors a practical reality

Download or read book High Temperature Superconductivity in Perspective written by and published by . This book was released on 1990 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Passive Microwave Device Applications of High Temperature Superconductors written by M. J. Lancaster and published by Cambridge University Press. This book was released on 2006-12-14 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the application of new high temperature superconducting materials to microwave devices and systems. It deals with the fundamentals of the interaction between microwaves and superconductors, and includes a basic description of how microwave devices can be constructed using these materials. Since the discovery of high temperature superconductors in 1986 there has been an enormous effort worldwide to develop and characterize these materials. Work on applications has proceeded more slowly however. Nevertheless, commercial applications are now beginning to arise, including use in passive microwave devices. The author carefully describes the advantages of using high temperature superconductors in these devices, enabling scientists and engineers to form a complete understanding of the subject. The rest of the book is devoted to examples of superconducting microwave filters, antennas and systems. The examples chosen relate not only to what can be achieved at present, but indicate the trends for future research and what may be expected for superconducting devices in the future. The book will appeal to researchers in electrical and electronic engineering.

Download or read book High temperature Superconductivity Technology Transfer written by United States. Congress. House. Committee on Science, Space, and Technology. Subcommittee on Energy Research and Development and published by . This book was released on 1988 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of High Tc Superconductivity written by Adir Luiz and published by BoD – Books on Demand. This book was released on 2011-06-27 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of the chapters intended to study only practical applications of HTS materials. You will find here a great number of research on actual applications of HTS as well as possible future applications of HTS. Depending on the strength of the applied magnetic field, applications of HTS may be divided in two groups: large scale applications (large magnetic fields) and small scale applications (small magnetic fields). 12 chapters in the book are fascinating studies about large scale applications as well as small scale applications of HTS. Some chapters are presenting interesting research on the synthesis of special materials that may be useful in practical applications of HTS. There are also research about properties of high-Tc superconductors and experimental research about HTS materials with potential applications. The future of practical applications of HTS materials is very exciting. I hope that this book will be useful in the research of new radical solutions for practical applications of HTS materials and that it will encourage further experimental research of HTS materials with potential technological applications.

Download or read book Introduction to High Temperature Superconductivity written by Thomas Sheahen and published by Springer Science & Business Media. This book was released on 2006-02-24 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing from physics, mechanical engineering, electrical engineering, ceramics, and metallurgy, high-temperature superconductivity (HTSC) spans nearly the entire realm of materials science. This volume presents each of those disciplines at an introductory level, such that readers will ultimately be able to read the literature in the field.

Download or read book Second Generation High Temperature Superconducting Coils and Their Applications for Energy Storage written by Weijia Yuan and published by Springer Science & Business Media. This book was released on 2011-06-24 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Second-Generation High-Temperature Superconducting Coils and Their Applications for Energy Storage addresses the practical electric power applications of high-temperature superconductors. It validates the concept of a prototype energy storage system using newly available 2G HTS conductors by investigating the process of building a complete system from the initial design to the final experiment. It begins with a clear introduction of the related background and then presents a comprehensive design of a superconducting energy storage system that can store maximum energy using a limited length of superconductors. The author has created a modeling environment for analysis of the system and also presents experimental results that are highly consistent with his theoretical calculations.

Download or read book Energy Applications of High temperature Superconductivity written by Steinar J. Dale and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in High Temperature Superconductors and their applications written by S. MOHAN and published by MJP Publisher. This book was released on 2019-06-20 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prof. Heike Kamerlingh Onnes discovered superconductivity while measuring resistivity of mercury. Surprisingly the resistivity of mercury ceased at 4.2 K and this phenomenon was known as superconductivity. He realized the importance of this discovery in producing large magnetic fieldspl. delateIt was realized that superconductivity is in a new thermodynamic state with peculiar electric and magnetic properties. This paved the way to discover more superconductors. Simple elements such as Tin, Indium or lead showed the highest critical temperature (Tc) 7.2 K. They were called as Type 1 superconductors. Niobium-nitride was found to superconduct at 16 K at 1941 and Vanadium-silicon showed superconductive properties at 17.5 K at 1953. Nb alloys and binary or more complex compounds such as Nb3Sn (Tc – 18 K), Nb-Ti (Tc -9 K), Ga, V with Tc,23 K became type II superconductors. Thereafter, there was not much improvement in the development of superconductor although wonderful applications were expected from superconductors. After three decades, Fullerenes, like ceramic superconductors, are discovered. A decade ago MgB2 was discovered with Tc = 39 K. These superconductors were routinely produced into formof wires for producing larger magnetic fields. In all these cases cooling was effectively done by liquid Helium. A comprehensive microscopic theory of superconductivity in metals was proposed in 1957 by John Bardeen, Leon Cooper and Robert Schrieffer (the so-called “BCS” theory) for which they received the Nobel Prize in Physics. In a major breakthrough, George Bednorz and Karl Mueller discovered a brittle ceramic superconductivity in the family of cuprates at 30 K in 1986 and a new era began. Inspired by the work of Bednorz and Mueller on high temperature superconductivity (HTS), Paul Chu and his associates at the University of Houston discovered in 1987, 123 compounds. That is, YBCO (Yttrium1- Barium2-Copper3- Oxygen7) and iso-structural RBCO (Rare-earth1-Barium2-Copper3-Oxygen7) have a Tc of 93 K. Prior to 1987, all superconducting materials had lower critical temperatures (Tc’s) and therefore functioned only at temperatures near the boiling point of liquid helium (4.2 K) or liquid hydrogen (20.28 K), with the highest being Nb3Ge at 23 K. They were known as low temperature superconductors. YBCO was the first material to become superconducting above 77 K, (boiling point of liquid nitrogen) and subsequently a series of high temperature superconducting materials were discovered. These superconducting materials are widely known as High temperature superconductors as these Tc’s exceeded the limit prescribed by BCS theory. HTSCs are potentially valuable as liquid nitrogen is cheaper than liquid helium. YBCO possesses superior superconducting and physical properties. YBCO receiver coils in NMR-spectrometers have improved the resolution NMR spectrometers by a factor of 3 compared to that achievable with conventional coils. Paul Chu’s group holds the current Tc-record of 164 K in the mercury barium based cuprate superconductor under pressure. Their work led to a rapid succession of new high temperature superconducting materials, ushering in a new era in material science, chemistry and technology. Added to this the structure of Bi2Sr2Ca2Cu2O10(BiSCCO) high temperature superconductive compound having T= 110 K was reported. In 1993, mercuric-cuprates, perovskite ceramic superconductors with the transition temperatures Tc =138 K was also reported.