Download or read book High Temperature Oxidation Behavior of Thermal Barrier Coatings written by Kazuhiro Ogawa and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Oxidation Behavior of Thermal Barrier Coatings.
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Gas Turbines written by Gurrappa Injeti and published by BoD – Books on Demand. This book was released on 2015-02-25 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current research in the area of gas turbines for different applications. It is a highly useful book providing a variety of topics ranging from basic understanding about the materials and coatings selection, designing and modeling of gas turbines to advanced technologies for their ever increasing efficiency, which is the need of the hour for modern gas turbine industries. The target audience for this book is material scientists, gas turbine engine design and maintenance engineers, manufacturers, mechanical engineers, undergraduate, post graduate students and academic researchers. The design and maintenance engineers in aerospace and gas turbine industry will benefit from the contents and discussions in this book.This book presents current research in the area of gas turbines for different applications. It is a highly useful book providing a variety of topics ranging from basic understanding about the materials and coatings selection, designing and modeling of gas turbines to advanced technologies for their ever increasing efficiency, which is the need of the hour for modern gas turbine industries. The target audience for this book is material scientists, gas turbine engine design and maintenance engineers, manufacturers, mechanical engineers, undergraduate, post graduate students and academic researchers. The design and maintenance engineers in aerospace and gas turbine industry will benefit from the contents and discussions in this book.
Download or read book Oxidation Behavior of Thermal Barrier Coating Systems with Al Interlayers written by Ibrahim El Araby Megahed Ali and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Barrier Coatings written by Hongbo Guo and published by Woodhead Publishing. This book was released on 2023-01-18 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Barrier Coatings, Second Edition plays a critical role in counteracting the effects of corrosion and degradation of exposed materials in high-temperature environments such as gas turbine and aero-engines. This updated edition reviews recent advances in the processing and performance of thermal barrier coatings, as well as their failure mechanisms. Novel technologies for the manufacturing of thermal barrier coatings (TBCs) such as plasma spray-physical vapor deposition and suspension plasma spray, are covered, as well as severe degradation of TBCs caused by CMAS attack. In addition to discussions of new materials and technologies, an outlook about next generation TBCs, including T/EBCs is discussed.This edition will provide the fundamental science and engineering of thermal barrier coatings for researchers in the field of TBCs, as well as students looking for a tutorial. Includes coverage of emerging materials, such as rare-earth doped ceramics Presents the latest on plasma spray-physical vapor deposition and suspension (solution precursor) Discusses the degradation of TBCs caused by CMAS attack and its protection Looks at thermally environmental barrier coatings, interdiffusion and diffusion barrier
Download or read book Plasma Spray Coating written by Robert B. Heimann and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades, thermal spraying of metallic, ceramic and composite coatings has emerged as a powerful tool for surface engineering, with many new applications and markets continually being developed. This book will help materials scientists and engineers to choose the most appropriate combination of materials, equipment, and operation parameters for the design of high-performance coatings with new functional properties and improved service life. Includes: * a thorough treatment of the fundamental physical processes governing plasma spray technology; * a critical assessment of advantages and disadvantages of the method compared with other suface coating techniques; * a discussion of basic equipment requirements and limitations; * case studies and typical applications to solve industrial problems. Plasma-Spray Coating offers a stimulating combination of basic concepts and practical applications. Materials scientists and engineers, as well as graduate students will find this book of enormous value.
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Production Properties and Applications of High Temperature Coatings written by Pakseresht, Amir Hossein and published by IGI Global. This book was released on 2018-01-12 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat resistant layers are meant to withstand high temperatures while also protecting against all types of corrosion and oxidation. Therefore, the micro-structure and behavior of such layers is essential in understanding the functionality of these materials in order to make improvements. Production, Properties, and Applications of High Temperature Coatings is a critical academic publication which examines the methods of creation, characteristics, and behavior of materials used in heat resistant layers. Featuring coverage on a wide range of topics such as, thermal spray methods, sol-gel coatings, and surface nanoengineering, this book is geared toward students, academicians, engineers, and researchers seeking relevant research on the methodology and materials for producing effective heat resistant layers.
Download or read book Oxidation behaviour of MCrAlX coatings written by Pimin Zhang and published by Linköping University Electronic Press. This book was released on 2018-02-12 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: MCrAlY coatings (M=Ni and/or Co) have been widely used for the protection of superalloy components against oxidation and hot corrosion in the hot sections of gas turbines. The drive to improve engine combustion efficiency while reducing emissions by increasing the operation temperature brings a big challenge for coating design. As a result, the need for improvement of MCrAlY coatings for better oxidation resistance is essential. Formation of a stable, dense, continuous, and slow-growing ?-Al2O3 layer, on the MCrAlY coating surface, is the key to oxidation protection, since the protective ?-Al2O3 scale offers superior oxidation resistance due to its lower oxygen-diffusion rate as compared with other oxides. The ability of a MCrAlY coating to form and maintain such a protective scale depends on the coating composition and microstructure, and can be improved through optimization of deposition parameters, modification of coating surface conditions, and so on. Part of this thesis work focuses on studying the effect of post-deposition surface treatments on the oxidation behavior of MCrAlX coatings (X can be yttrium and/or other minor alloying elements). The aim is to gain fundamental understanding of alumina scale evolution during oxidation which is important for achieving improved oxidation resistance of MCrAlX coatings. Oxide scale formed on coatings at initial oxidation stage and the effect of surface treatment were investigated by a multi-approach study combining photo-stimulated luminescence, microstructural observation and weight gain. Results showed that both mechanically polished and shot-peened coatings exhibited superior performance due to rapid formation of ?-Al2O3 fully covering the coating and suppressing growth of transient alumina, assisted by the high density of ?-Al2O3 nuclei on surface treatment induced defects. The early development of a two-layer alumina scale, consisting of an inward-grown inner ?-Al2O3 layer and an outer layer transformed from outward-grown transient alumina, resulted in a higher oxide growth rate of the as-sprayed coating. The positive effect of the surface treatments on retarding oxide scale growth and suppressing formation of spinel was also observed in oxidation test up to 1000 hrs. As the oxidation proceeds to the close-to-end stage, a reliable criterion to estimate the capability of coating to form ?-Al2O3 is of great importance to accurately evaluate coating lifetime, which is the aim of the other part of the thesis work. Survey of published results on a number of binary Ni-Al and ternary Ni-Cr-Al, Ni-Al-Si systems shows that the empirical Al-concentration based criterion is inadequate to properly predict the formation of a continuous ?-Al2O3 scale. On the other hand, correlating the corresponding Al-activity data, calculated from measured chemical compositions using the Thermo-Calc software, to the experimental oxidation results has revealed a temperature dependent, critical Al-activity value for forming continuous ?-Al2O3 scale. To validate the criterion, long-term oxidation tests were performed on five MCrAlX coatings with varying compositions and the implementation of the Al-activity based criterion on these coatings successfully predicted ?-Al2O3 formation, showing a good agreement with experiment results.
Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.
Download or read book Furnace Cyclic Oxidation Behavior of Multi Component Low Conductivity Thermal Barrier Coatings written by Dong-Ming Zhu and published by BiblioGov. This book was released on 2013-07 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic thermal barrier coatings will play an increasingly important role in advanced gas turbine engines because of their ability to further increase engine operating temperatures and reduce cooling, thus helping achieve future engine low emission, high efficiency and improved reliability goals. Advanced multi-component zirconia-based thermal barrier coatings are being developed using an oxide defect clustering design approach to achieve the required coating low thermal conductivity and high temperature stability. Although the new composition coatings were not yet optimized for cyclic durability, an initial durability screening of the candidate coating materials was conducted using conventional furnace cyclic oxidation tests. In this paper, furnace cyclic oxidation behavior of plasma-sprayed zirconia-based defect cluster thermal barrier coatings was investigated at 1163 C using 45 min hot cycles. The ceramic coating failure mechanisms were studied using scanning electron microscopy (SEM) combined with X-ray diffraction (XRD) phase analysis after the furnace tests. The coating cyclic lifetime is also discussed in relation to coating processing, phase structures, dopant concentration, and other thermo-physical properties.
Download or read book Furnace Cyclic Oxidation Behavior of Multi Component Low Conductivity Thermal Barrier Coatings written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-21 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic thermal barrier coatings will play an increasingly important role in advanced gas turbine engines because of their ability to further increase engine operating temperatures and reduce cooling, thus helping achieve future engine low emission, high efficiency and improved reliability goals. Advanced multi-component zirconia-based thermal barrier coatings are being developed using an oxide defect clustering design approach to achieve the required coating low thermal conductivity and high temperature stability. Although the new composition coatings were not yet optimized for cyclic durability, an initial durability screening of the candidate coating materials was conducted using conventional furnace cyclic oxidation tests. In this paper, furnace cyclic oxidation behavior of plasma-sprayed zirconia-based defect cluster thermal barrier coatings was investigated at 1163 C using 45 min hot cycles. The ceramic coating failure mechanisms were studied using scanning electron microscopy (SEM) combined with X-ray diffraction (XRD) phase analysis after the furnace tests. The coating cyclic lifetime is also discussed in relation to coating processing, phase structures, dopant concentration, and other thermo-physical properties. Zhu, Dong-Ming and Nesbitt, James A. and Barrett, Charles A. and McCue, Terry R. and Miller, Robert A. Glenn Research Center NASA/TM-2004-212962, ARL-TR-3260, E-14434
Download or read book The Role of Active Elements in the Oxidation Behaviour of High Temperature Metals and Alloys written by E. Lang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals and alloys rely for their application at high temperature on the formation and retention of oxide scales, which act as a barrier between the metallic substrate and the reactive species in the environment such as 0, S, N, C, Cl, etc. This protection concept requires that the oxide grows slowly, develops a dense, uniform layer, is well adherent, has sufficient ductility to accom modate plastic deformation of the substrate and is resistant to thermal cycling. For many years it has been known that small concentrations of certain "active elements" such as Y and the rare earths, as well as carbon and sulphur, can exercise a significant influence upon the oxidation! corrosion behaviour of high temperature metals and alloys. An increasing number of experimental studies on this topic have been published recently. However no generally accepted understanding with regard to the detailed mechanisms and the way in which alloy composition and structure, temperature and environmental conditions, etc., are interacting has yet been achieved, although many - often controversial - theories and ideas have been presented. It therefore seemed to be an appropriate time to bring together a group of experts to review and evaluate the current state-of-the-art and to discuss various aspects of this important topic.
Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings. Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials. This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. Describes the latest developments in understanding high temperature corrosion Presents the latest research by the leading innovators from around the globe Case studies are provided to illustrate key points
Download or read book Elevated Temperature Coatings written by Narendra B. Dahorte and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceedings focuses on processing and characterizing high-temperature coatings with regard to engineering, physical, and chemical properties. It includes the synthesis of new and unconventional coating materials and addresses various existing methods along with novel and innovative techniques of producing coatings and their applications.
Download or read book Proceedings of the Symposium on High Temperature Corrosion and Materials Chemistry written by Electrochemical Society. High Temperature Materials Division and published by The Electrochemical Society. This book was released on 1998 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
