Download or read book High Temperature Mechanical Behavior and Deformation Process of Titanium Alloys with Controlled Microstructures written by Qiang Li and published by . This book was released on 1997 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Hot Working Guide written by Y. V. R. K. Prasad and published by ASM International. This book was released on 1997-01-01 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique source book with flow stress data for hot working, processing maps with metallurgical interpretation and optimum processing conditions for metals, alloys, intermetallics, and metal matrix composites. The use of this book replaces the expensive and time consuming trial and error methods in process design and product development.
Download or read book The Relationships Between High Temperature Deformation Mechanisms Microstructures and Mechanical Properties in Titanium Alloys written by Abdus Salam and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Titanium Alloys at Elevated Temperature written by Mike R. Winstone and published by CRC Press. This book was released on 2001 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth in a series of international conferences on the Microstructure of High Temperature Materials and the first to exclusively focus on the microstructure and properties of titanium alloys. Papers demonstrating the exploitation of these alloys in a wide range of commercial high temperature applications from the automotive to the aerospace industries were presented.
Download or read book The Relationship of Microstructure and Mechanical Properties of Extruded Titanium Alloy Bars to the Prior Deformation Processing History written by Fred J. Gurney and published by . This book was released on 1971 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inter-relation of extrusion process variables with mechanical properties and microstructure is analyzed for three titanium alloys (Ti-5Al-2.5Sn, Ti-6Al-4V and Ti-13V-11Cr-3Al). Information is obtained from duplicate billets which were extruded at same conditions with one extruded bar allowed to air cool and the other bar water quenched immediately after extrusion. Results indicate that significant reduction in deformation loads can be achieved in alpha and alpha-beta titanium alloys by processing them in the beta temperature range. Resultant metallurgical structures and mechanical properties (room temperature tensile and Charpy V notch impact) are found to not be significantly affected by process variables other than preheat temperature and product cooling rate. In alpha and alpha-beta alloys, the room temperature strength properties of beta processed and water quenched product is significantly improved over those of beta processed and air cooled product and somewhat improved over those for alpha-beta processed followed by either air cooling or water quenching. Mechanical properties from the beta alloy are not significantly affected by process temperature or by product cooling rate except for some anomalous behavior in the 2050F processing temperature range. (Author).
Download or read book Titanium Alloys written by W Sha and published by Elsevier. This book was released on 2009-04-29 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their growing importance in the aerospace, automotive, sports and medical sectors, modelling the microstructure and properties of titanium and its alloys is a vital part of research into the development of new applications. This is the first time a book has been dedicated to modelling techniques for titanium.Part one discusses experimental techniques such as microscopy, synchrotron radiation X-ray diffraction and differential scanning calorimetry. Part two reviews physical modelling methods including thermodynamic modelling, the Johnson-Mehl-Avrami method, finite element modelling, the phase-field method, the cellular automata method, crystallographic and fracture behaviour of titanium aluminide and atomistic simulations of interfaces and dislocations relevant to TiAl. Part three covers neural network models and Part four examines surface engineering products. These include surface nitriding: phase composition, microstructure, mechanical properties, morphology and corrosion; nitriding: modelling of hardness profiles and kinetics; and aluminising: fabrication of Ti coatings by mechanical alloying.With its distinguished authors, Titanium alloys: Modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with titanium modelling, as well as users of titanium, titanium alloys and titanium aluminide in the aerospace, automotive, sports and medical implant sectors. - Comprehensively assesses modelling techniques for titanium, including experimental techniques such as microscopy and differential scanning calorimetry - Reviews physical modelling methods including thermodynamic modelling and finite element modelling - Examines surface engineering products with specific chapters focused on surface nitriding and aluminising
Download or read book Discontinuously Reinforced Titanium Matrix Composites written by Lujun Huang and published by Springer. This book was released on 2017-04-21 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to titanium matrix composites (TMCs) with novel network microstructures. The bottleneck problem of extreme brittleness and low strengthening effect surrounding TMCs fabricated by means of powder metallurgy has recently been solved by designing network microstructures, which yield both high strength and superior ductility. As such, network structured TMCs will increasingly offer materials characterized by low weight, high strength, high temperature resistance and superior deformability. The book systematically addresses the design, fabrication, microstructure, properties, modification, and toughening mechanisms of these composites, which will help us find innovative solutions to a range of current and future engineering problems.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Heat and Mechanical Treatment of Titanium and Its Alloys Chapter 5 written by M. L. Bernshtein and published by . This book was released on 1970 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The superiority of titanium alloys for use as construction material is discussed and the advantages of heat and mechanical treatment of specific titanium alloys including VT3-1, VT8 and VT14 are pointed out. Changes in treatment processes, including degree of deformation, quenching procedure, aging times and temperatures are shown to affect the mechanical properties of titanium alloys. Specific changes in mechanical properties, including tensile strength, plasticity and impact toughness are presented graphically. Optimal treatment conditions are developed for specified increases in strength and plasticity. The investigation includes comparative studies of the microstructures of alloys subjected to different mechanical and heat treatments. (Author).
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 2004 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2016-04-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differenti
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation mechanism Maps written by H. J. Frost and published by Pergamon. This book was released on 1982 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
