Download or read book High Temperature Low Cycle Fatigue and Correlation to Crack Growth Rate in Two Nickel Base Superalloys written by Seung Joo Choe and published by . This book was released on 1985 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1988 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superalloys 2012 written by Eric S. Huron and published by John Wiley & Sons. This book was released on 2012-10-02 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength at high temperatures. Superalloy development has been driven primarily by the aerospace and power industries. This compilation of papers from the Twelfth International Symposium on Superalloys, held from September 9-13, 2012, offers the most recent technical information on this class of materials.
Download or read book Fatigue Crack Growth and Low Cycle Fatigue of Two Nickel Base Superalloys written by N. S. Stoloff and published by . This book was released on 1983 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Cycle Fatigue written by Harvey D. Solomon and published by ASTM International. This book was released on 1988 with total page 1289 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Behaviour of Materials at High Temperature written by C. Moura Branco and published by Springer Science & Business Media. This book was released on 1996-06-30 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the edited version of lectures and selected research contributions presented at the NATO ADVANCED STUDY INSTITUTE on MECHANICAL BEHA VI OUR OF MATERIALS AT HIGH TEMPERATURE, held in Sesimbra, Portugal, 12th-22nd September 1995, and organized by 1ST-Lisbon Institute of Technology, PortugaL The Institute was attended by 88 participants, including 15 lecturers from 17 countries including five CP countries. The lecturers were leading scientists and technologists from universities, research institutions and industry. The students were mainly young PhD students and junior academic or research staff with postgraduate qualifications (MSc or PhD). Fourteen students were from the five CP countries. The students presented research papers or posters during the Institute reporting the current progress of their research projects. A total of thirty three lectures, ten research papers and fifty posters were presented. This book does not contain the poster presentations and seven research papers were selected for publication. All the sessions were very active and quite extensive discussions on scientific aspects took place during the Institute. The Advanced Study Institute provided a forum for interaction among scientists and engineers from different areas of research, and young researchers.
Download or read book Modelling of Crack Growth in Single Crystal Nickel Base Superalloys written by Christian Busse and published by Linköping University Electronic Press. This book was released on 2019-09-24 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation was produced at the Division of Solid Mechanics at Linköping University and is part of a research project, which comprises modelling, microstructure investigations and material testing of cast nickel-base superalloys. The main objective of this work was to deepen the understanding of the fracture behaviour of single-crystal nickel-base superalloys and to develop a model to predict the fatigue crack growth behaviour. Frequently, crack growth in these materials has been observed to follow one of two distinct cracking modes; Mode I like cracking perpendicular to the loading direction or crystallographic crack growth on the octahedral {111}-planes, where the latter is associated with an increased fatigue crack growth rate. Thus, it is of major importance to account for this behaviour in component life prediction. Consequently, a model for the prediction of the transition of cracking modes and the correct active crystallographic plane, i.e. the crack path, and the crystallographic crack growth rate has been developed. This model is based on the evaluation of appropriate crack driving forces using three-dimensional finite-element simulations. A special focus was given towards the influence of the crystallographic orientation on the fracture behaviour. Further, a model to incorporate residual stresses in the crack growth modelling is presented. All modelling work is calibrated and validated by experiments on different specimen geometries with different crystallographic orientations. This dissertation consists of two parts, where Part I gives an introduction and background to the field of research, while Part II consists of six appended papers. Die vorliegende Dissertation wurde in der Abteilung für Festigkeitslehre an der Universität von Linköping erstellt und ist Teil eines Forschungsprojektes, welches Modellierung, Mikrostrukturuntersuchungen und Materialtests von gegossenen nickelbasierten Superlegierungen umfasst. Das Hauptziel dieser Arbeit war es, das Verständnis des Bruchverhaltens von einkristallinen Superlegierungen auf Nickelbasis zu vertiefen und ein Modell zur Vorhersage des Wachstumsverhaltens von Ermüdungsrissen zu entwickeln. Es wurde beobachtet, dass das Risswachstum in diesen Materialien einem von zwei unterschiedlichen Rissmodi folgt; Modus I Rissfortschritt senkrecht zur Belastungsrichtung oder kristallographisches Risswachstum auf den oktaedrischen f111g-Ebenen, wobei letzteres mit einer erhöhten Ermüdungsrisswachstumsrate verbunden ist. Somit ist es von grosser Bedeutung dieses Verhalten in der Lebensdauervorhersage einer Komponente zu berücksichtigen. Demzufolge wurde ein Modell für die Vorhersage des Übergangs zwischen den Rissmodi und der korrekten aktiven kristallographischen Ebene, d.h. des Risspfades, sowie der kristallographischen Risswachstumsrate erarbeitet. Dieses Modell basiert auf geeigneten Rissantriebskräften, welche mit Hilfe dreidimensionaler Finite-Elemente-Simulationen berechnet werden. Im Fokus stand insbesondere der Einuss der kristallographischen Orientierung auf das Bruchverhalten. Ausserdem wird ein Modell zur Berücksichtigung von Restspannungen in der Risswachstumsmodellierung präsentiert. Alle Modellierungsarbeiten wurden durch Experimente an verschiedenen Probengeometrien mit unterschiedlichen kristallographischen Orientierungen kalibriert und validiert. Diese Dissertation besteht aus zwei Teilen, wobei Teil I aus einer Einführung und einem Hintergrund in das Forschungsgebiet und Teil II aus sechs beigefügten Forschungsartikeln besteht.
Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superalloys 2020 written by Sammy Tin and published by Springer Nature. This book was released on 2020-08-28 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 14th International Symposium on Superalloys (Superalloys 2020) highlights technologies for lifecycle improvement of superalloys. In addition to the traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufacturability, affordability, life prediction, and performance of superalloys.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Cycle Fatigue and Elasto Plastic Behaviour of Materials 3 written by K.T. Rie and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceeds of the Third International Conference on Low Cycle Fatigue and Elasto-plastic Behaviour of Materials, Berlin Congress Center, Berlin, Germany, 7-11 September 1992
Download or read book Aerospace Materials and Material Technologies written by N. Eswara Prasad and published by Springer. This book was released on 2016-11-11 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.
Download or read book Grain Boundaries and Crystalline Plasticity written by Louisette Priester and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of this book is to put forward the fundamental role of grain boundaries in the plasticity of crystalline materials. To understand this role requires a multi-scale approach to plasticity: starting from the atomic description of a grain boundary and its defects, moving on to the elemental interaction processes between dislocations and grain boundaries, and finally showing how the microscopic phenomena influence the macroscopic behaviors and constitutive laws. It involves bringing together physical, chemical and mechanical studies. The investigated properties are: deformation at low and high temperature, creep, fatigue and rupture.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1976 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1988 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromechanisms of Low Cycle Fatigue in Nickel Based Superalloys at Elevated Temperatures written by RM. Pelloux and published by . This book was released on 1979 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: The micromechanisms of high-temperature fatigue crack initiation and crack propagation in solid-solution and precipitation-strengthened nickel-base super-alloys are reviewed. The marked decrease in fatigue strength of a given superalloy with increasing temperature cannot be solely correlated with the temperature dependence of the short-time mechanical properties. The interactions between oxidation rates and fatigue strengths are very complex. The air environment plays a large role in accelerating the initiation and propagation of fatigue cracks at elevated temperatures. Increasing temperature and decreasing frequency lead to a transition from transgranular to intergranular fracture path.
Download or read book High Temperature Low Cycle Fatigue Mechanisms for a Nickel base and a Copper base Alloy written by Chin-I. Shih and published by . This book was released on 1982 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
