Download or read book High Temperature Corrosion During Use of Chlorine Containing Coal written by and published by . This book was released on 1991 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this project is to characterize the role of chlorine in coal on the high temperature corrosion processes which can occur in coal combustion and conversion processes. The experiments include laboratory tests performed in well-controlled high temperature environments and field tests in industrial coal fired boilers. Evaluation of samples of boiler tubes which have been recovered from boilers which used both high and low chlorine coals does not indicate that the higher chlorine levels are associated with accelerated corrosion of either water wall tubes or superheater tubes in pulverized coal boilers. Laboratory testing of metal coupons in combustion gas environments produced from low sulfur, high chlorine coal IBC-109 and high sulfur-low chlorine coal IBC-101has been performed at 800°C. No significant difference in corrosion are evident. Further testing at other temperatures and gas compositions is underway.
Download or read book High Temperature Chlorine Corrosion during Co Utilisation of Coal with Biomass or Waste written by Xiaoyang Gaus-Liu and published by Cuvillier Verlag. This book was released on 2008 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion During Use of Chlorine Containing Coal Technical Report September 1 1991 November 30 1991 written by and published by . This book was released on 1991 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this project is to characterize the role of chlorine in coal on the high temperature corrosion processes which can occur in coal combustion and conversion processes. The experiments include laboratory tests performed in well-controlled high temperature environments and field tests in industrial coal fired boilers. Evaluation of samples of boiler tubes which have been recovered from boilers which used both high and low chlorine coals does not indicate that the higher chlorine levels are associated with accelerated corrosion of either water wall tubes or superheater tubes in pulverized coal boilers. Laboratory testing of metal coupons in combustion gas environments produced from low sulfur, high chlorine coal IBC-109 and high sulfur-low chlorine coal IBC-101has been performed at 800°C. No significant difference in corrosion are evident. Further testing at other temperatures and gas compositions is underway.
Download or read book High Temperature Corrosion During Use of Chlorine Containing Gel written by and published by . This book was released on 1992 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this project is to characterize the role of chlorine in coal on the high temperature corrosion processes which can occur in coal combustion and conversion processes. The experiments include laboratory tests performed in well-controlled high temperature environments and field tests in industrial coal fired boilers. Evaluation of samples of boiler tubes which have been recovered from boilers which used both high and low chlorine coals does not indicate that the higher chlorine levels are associated with accelerated corrosion of either water wall tubes or superheater tubes in pulverized coal boilers. Laboratory testing of metal coupons in combustion gas environments produced from low sulfur, high chlorine coal IBC-109 and high sulfur-low chlorine coal IBC-101 has been performed at 700 and 800°C. Initial results indicate that more corrosion is produced in the high sulfur environment than in the high chlorine environment. Further testing at other temperatures and gas compositions is in progress.
Download or read book High Temperature Corrosion During Use of Chlorine Containing Gel Technical Report December 1 1991 February 29 1992 written by and published by . This book was released on 1992 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this project is to characterize the role of chlorine in coal on the high temperature corrosion processes which can occur in coal combustion and conversion processes. The experiments include laboratory tests performed in well-controlled high temperature environments and field tests in industrial coal fired boilers. Evaluation of samples of boiler tubes which have been recovered from boilers which used both high and low chlorine coals does not indicate that the higher chlorine levels are associated with accelerated corrosion of either water wall tubes or superheater tubes in pulverized coal boilers. Laboratory testing of metal coupons in combustion gas environments produced from low sulfur, high chlorine coal IBC-109 and high sulfur-low chlorine coal IBC-101 has been performed at 700 and 800°C. Initial results indicate that more corrosion is produced in the high sulfur environment than in the high chlorine environment. Further testing at other temperatures and gas compositions is in progress.
Download or read book High Temperature Corrosion During Use of Chlorine written by and published by . This book was released on 1992 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this project is to characterize the role of chlorine in coal on the high temperature corrosion processes which can occur in coal combustion and conversion processes. The experience include laboratory tests performed in well-controlled high temperature environments and field tests in industrial coal fired boilers. Evaluation of samples of boiler tubes which have been recovered from boilers which used both high and low chlorine coals does not indicate that the higher chlorine levels are associated with accelerated corrosion of either water wall tubes or superheater tubes in pulverized coal boilers. Laboratory testing of metal coupons in combustion gas environments produced from low sulfur, high chlorine coal IBC-109 and high sulfur-low chlorine coal IBC-101 has been performed at 700 and 800°C. Initial results indicate that more overall corrosion is produced in the high sulfur environment than in the high chlorine environment. Internal attack in the highly alloyed metals alloy 800 and 310 stainless steel is accelerated by the presence of chlorine in the environment, but the level of chlorine required to produce this attack has not yet been determined. Further testing at other temperatures and gas compositions is in progress.
Download or read book High Temperature Corrosion and Materials Applications written by George Y. Lai and published by ASM International. This book was released on 2007-01-01 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Lai's 1990 book, High-Temperature Corrosion of Engineering Alloys, is recognized as authoritative and is frequently consulted and often cited by those in the industry. His new book, almost double in size with seven more chapters, addresses the new concerns, new technologies, and new materials available for those engaged in high-temperature applications. As we strive for energy efficiency, the realm of high-temperature environments is expanding and the need for information on high temperature materials applications was never greater. In addition to extensive expansion on most of the content of the original book, new topics include erosion and erosion-corrosion, low NOx combustion in coal-fired boilers, fluidized bed combustion, and the special demands of waste-to-energy boilers, waste incinerators, and black liquor recovery boilers in the pulp and paper industry. The corrosion induced by liquid metals is discussed and protection options are presented.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion in Energy Systems written by Michael F. Rothman and published by Society for Mining Metallurgy & Exploration. This book was released on 1985 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature Corrosion of Fe3Al in Chlorine Containing Environments written by Gilsoo Han and published by . This book was released on 2003 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shreir s Corrosion written by and published by Elsevier. This book was released on 2009-02-27 with total page 3652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four-volume reference work builds upon the success of past editions of Elsevier’s Corrosion title (by Shreir, Jarman, and Burstein), covering the range of innovations and applications that have emerged in the years since its publication. Developed in partnership with experts from the Corrosion and Protection Centre at the University of Manchester, Shreir’s Corrosion meets the research and productivity needs of engineers, consultants, and researchers alike. Incorporates coverage of all aspects of the corrosion phenomenon, from the science behind corrosion of metallic and non-metallic materials in liquids and gases to the management of corrosion in specific industries and applications Features cutting-edge topics such as medical applications, metal matrix composites, and corrosion modeling Covers the benefits and limitations of techniques from scanning probes to electrochemical noise and impedance spectroscopy
Download or read book High Temperature Corrosion During Use of Chlorine Technical Report March 1 1992 May 31 1992 written by and published by . This book was released on 1992 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this project is to characterize the role of chlorine in coal on the high temperature corrosion processes which can occur in coal combustion and conversion processes. The experience include laboratory tests performed in well-controlled high temperature environments and field tests in industrial coal fired boilers. Evaluation of samples of boiler tubes which have been recovered from boilers which used both high and low chlorine coals does not indicate that the higher chlorine levels are associated with accelerated corrosion of either water wall tubes or superheater tubes in pulverized coal boilers. Laboratory testing of metal coupons in combustion gas environments produced from low sulfur, high chlorine coal IBC-109 and high sulfur-low chlorine coal IBC-101 has been performed at 700 and 800°C. Initial results indicate that more overall corrosion is produced in the high sulfur environment than in the high chlorine environment. Internal attack in the highly alloyed metals alloy 800 and 310 stainless steel is accelerated by the presence of chlorine in the environment, but the level of chlorine required to produce this attack has not yet been determined. Further testing at other temperatures and gas compositions is in progress.
Download or read book Novel Approaches to Improving High Temperature Corrosion Resistance written by M Schütze and published by Elsevier. This book was released on 2008-05-29 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature corrosion is a major problem affecting sectors such as the power generation, aerospace and metal-working industries. This important book summarises a wide range of research on ways of dealing with this important problem. The first part of the book reviews ways of modifying alloys to improve high-temperature corrosion resistance. The second part discusses surface treatments such as pre-treatments and coatings. The third part of the book summarises research on testing for high-temperature corrosion resistance and the development of common testing standards. It also reviews research on the behaviour of alloys in a wide range of service conditions such as furnace and boiler environments. The final part of the book discusses ways of modelling high-temperature corrosion processes to improve material performance and service life.With its distinguished editors and team of contributors drawn from some of the leading centres of research in the field, Novel approaches to improving high-temperature corrosion resistance is a standard reference for all those studying and dealing with high-temperature corrosion. - Summarises a wide range of research on ways of dealing with high-temperature corrosion - Discusses ways of modelling high-temperature corrosion processes to improve material performance and service life - A standard reference for all those studying and dealing with high-temperature corrosion
Download or read book Protective Systems for High Temperature Applications EFC 57 written by M. Schutze and published by CRC Press. This book was released on 2023-04-14 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a review of corrosion and thermal protection topics associated with coatings applied in high temperature applications, namely catalytic converters, combustion and steam environments, and gas turbines. Information on corrosion influencing mechanisms and their impact are reviewed.
Download or read book Chlorine in Coal written by John Stringer and published by Elsevier Publishing Company. This book was released on 1991 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Illinois basin coals have a chlorine content which varies from 0.1% to values in excess of 0.5%. The mean chlorine content of the coal being mined is steadily rising. Customers are already expressing some unease and contracts limiting the chlorine content of coal have been reported. This has potentially significant implications for the industry. The object of this Conference was to attempt to quantify the impact of coal chlorine content on a variety of coal-using technologies, and to identify new research which is necessary to allow a rational definition of the limits of chlorine content required for each technology. The distribution of chlorine in the Illinois Basin coals was considered, and the current state of knowledge of the forms in which the chlorine is present in the coal was reviewed. The release of the chlorine from the coal during its processing, and the forms in which it is present in the products was examined. This information permits an assessment of the viability of methods of removing chlorine, either in coal preparation or from the post-processing products.The effect of chlorine on the coal conversion and combustion processes, and on the balance of the plant was reviewed. The most important effects are on the corrosion of construction materials at both high and low temperatures. These proceedings should be of interest to power plant, corrosion, and chemical engineers, and to coal cleaning technologists and researchers.
Download or read book Materials for High Temperature Engineering Applications written by G.W. Meetham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise survey describes the requirements on materials operating in high-temperature environments and the processes that increase the temperature capability of metals, ceramics, and composites. The major part deals with the applicable materials and their specific properties, with one entire chapter devoted to coatings. Written for engineering and science students, researchers, and managers in industry.
Download or read book Impact of Mineral Impurities in Solid Fuel Combustion written by R. Gupta and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the Engineering Foundation Conference on mineral matter in fuels held on November 2-7, 1997 in Kona, Hawaii. The conference is one of a continuing series that was initiated by the CEGB Mar- wood Engineering Laboratories in 1963. The conference was to be eventually organised by the Engineering Foundation as the need for multi-disciplinary work related to c- trolling ash effects in combustors became apparent. The conference covers both the science and the applications. The papers also present case histories, particularly for current fuel technologies, developments in advanced technologies for power generation and mathematical modelling of these processes. Developments since 1963 have been slow, but steady, due to the complexity of the chemical and physical processes involved. However, the research presented here displays great improvement in our understanding of the mechanisms by which mineral matter will influence fuel use. Steve Benson from EERC presented a review and current status of issues related to ash deposition in coal combustion and gasification. The application of new analytical tools, which have been detailed in the previous conferences, is presented. These include CCSEM, as well as new techniques for char- terising sintering of ash, such as TMA, image analysis, X-ray diffraction crystallography and thermal analysis. The new analytical techniques were extended to encompass widely differing fuels such as biomass. Ole H Larsen from ELSAM Denmark presented a review of these advanced techniques.
