Download or read book High Temperature Aluminides and Intermetallics written by S.H. Whang and published by Elsevier. This book was released on 2013-10-22 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of proceedings is concerned with an increasingly important area, that of intermetallics and high temperature aluminides, which has recently been attracting a great deal of attention. Nearly 150 papers presented at the meeting held in San Diego in September 1991 are reproduced here. They cover a wide range of related topics such as the bonding characteristic and alloying behaviour of TiA1 intermetallic compounds and the cleavage fracture of ordered intermetallic alloys. All the papers have been reviewed according to the standards set by Materials Science and Engineering. This book will be of interest to metallurgists and materials scientists working with composites who are interested in the latest developments in this fast–moving field.
Download or read book High Temperature Aluminides Intermetallics written by Sung-Hyun Whang and published by Minerals, Metals, & Materials Society. This book was released on 1990 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 25 papers dealing with various subjects including alloy stability, deformation, ductility, role of surface and interface, mechanical properties at room and high temperatures, new areas of applications, and novel systems such as silicides and beryllides.
Download or read book High Temperature Aluminides and Intermetallics written by Sung-Hyun Whang and published by Elsevier Science Limited. This book was released on 1992 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy and processing of Intermetallic Compounds written by N.S. Stoloff and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The attractive physical and mechanical properties of ordered intermetallic alloys have been recognized since early in this century. However, periodic attempts to develop intermetallics for structural applications were unsuc cessful, due in major part to the twin handicaps of inadequate low-temper ature ductility or toughness, together with poor elevated-temperature creep strength. The discovery, in 1979, by Aoki and Izumi in Japan that small additions of boron caused a dramatic improvement in the ductility of Ni3Al was a major factor in launching a new wave of fundamental and applied research on intermetallics. Another important factor was the issuance in 1984 of a National Materials Advisory Board reported entitled "Structural Uses for Ductile Ordered Alloys," which identified numerous potential defense-related applications and proposed the launching of a coordinated development program to gather engineering property and processing data. A substantial research effort on titanium aluminides was already underway at the Air Force Materials Laboratory at Wright Patterson Air Force Base in Ohio and, with Air Force support, at several industrial and university laboratories. Smaller programs also were under way at Oak Ridge National Laboratory, under Department of Energy sponsorship. These research efforts were soon augmented in the United States by funding from Department of Defense agencies such as Office of Naval Research and Air Force Office of Scientific Research, and by the National Science Foundation.
Download or read book Intermetallics written by Gerhard Sauthoff and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the highly acclaimed series Materials Science and Technology, this book covers the properties as well as the present and emerging applications of intermetallics. Mechanical characteristics, microstructure as well as the environmental influence on intermetallics are treated in depth. In addition, the prospects and risks inherent in materials development as well as typical applications of intermetallics are critically assessed. It is the author's aim to provide the basis for understanding the physical mechanisms, which influence the properties of the materials and ultimately their areas of application. Materials covered include: Titanium Aluminides and Related Phases * Nickel Aluminides and Related Phases * Iron Aluminides and Related Phases * Cu-Base Phases * A15 Phases * Laves Phases * Rare-Earth Compound * Beryllides * Silicides Intermetallics is a valuable source of information for researchers and graduate students working in materials science, metallurgy, condensed-matter physics, and engineering.
Download or read book Intermetallic Matrix Composites written by Rahul Mitra and published by Elsevier. This book was released on 2017-05-25 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallic Matrix Composites: Properties and Applications is a comprehensive guide that studies the types and properties of intermetallic matrix composites, including their processing techniques, characterization and the various testing methods associated with these composites. In addition, it presents modeling techniques, their strengthening mechanisms and the important area of failure and repair. Advanced /complex IMCs are then explained, such as Self-healing IMCs and laminated intermetallic composites. The book concludes by delving into the industries that use these materials, including the automotive industry. Reviews the latest research in intermetallic matrix composites Contains a focus on properties and applications Includes contributions from leading experts in the field
Download or read book High Temperature Aluminides and Intermetallics written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings. Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials. This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. Describes the latest developments in understanding high temperature corrosion Presents the latest research by the leading innovators from around the globe Case studies are provided to illustrate key points
Download or read book Oxidation of Intermetallics written by Hans Jürgen Grabke and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last ten years vast efforts were made in the research and development of intermetallic compounds to attain improved high temperature strength and low temperature ductility. These new structural materials are used in several high-temperature applications like engines and turbines. Oxidation and corrosion resistance are as important for the current applications of these materials as mechanical properties. This book gives a sound review of the present knowledge of the oxidation kinetics and mechanisms of intermetallics. Especially Ti-, Ni- and Fe-aluminides are treated in detail by experts from Europe, USA and Japan. The information provided will be of wealth for any engineer and scientist- materials scientist, physicist or chemist - involved in the development of new intermetallic materials and their applications.
Download or read book Basics of Thermodynamics and Phase Transitions in Complex Intermetallics written by Esther Belin-Ferre and published by World Scientific. This book was released on 2008 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the first of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book High Temperature Aluminides and Intermetallics written by S. H. Whang and published by . This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ordered Intermetallics written by C.T. Liu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ordered intermetallics constitute a unique class of metallic materials which may be developed as new-generation materials for structural use at high temperatures in hostile environments. At present, there is a worldwide interest in intermetallics, and extensive efforts have been devoted to intermetallic research and development in the U.S., Japan, European countries, and other nations. As a result, significant advances have been made in all areas of intermetallic research. This NATO Advanced Workshop on ordered intermetallics (1) reviews the recent progress, and (2) assesses the future direction of intermetallic research in the areas of electronic structure and phase stability, deformation and fracture, and high-temperature properties. The book is divided into six parts: (1) Electronic Structure and Phase Stability; (2) Deformation and Dislocation Structures; (3) Ductility and Fracture; (4) Kinetic Processes and Creep Behavior; (5) Research Programs and Highlights; and (6) Assessment of Current Research and Recommendation for Future Work. The first four parts review the recent advances in the three focus areas. The fifth part provides highlights of the intermetallic research under major programs and in different institutes and countries. The last part provides a forum for the discussion of research areas for future studies.
Download or read book Oxidation and Corrosion of Intermetallic Alloys written by Gerhard Welsch and published by ASM International(OH). This book was released on 1996 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides researchers and development engineers with essential information on intermetallics for high temperature applications. The information will enable users to make choices by considering cost, properties, and performance for long-term use at elevated temperatures and in other adverse environmental conditions. It provides an overview of processing, structural and mechanical properties, applications, behavior and endurance at high temperature and in oxidizing conditions. It also focuses on 'pesting' disintegration, corrosion and oxidation phenomena at intermediate temperatures, corrosion embrittlement at ambient temperatures, aqueous corrosion and corrosion sensitive embrittlement properties.
Download or read book Structural Intermetallics and Intermetallic Matrix Composites written by Rahul Mitra and published by CRC Press. This book was released on 2015-04-28 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fills a Prominent Gap in a Significant Area of IntermetallicsPresenting a comprehensive overview of structural intermetallics (the most important class of intermetallics), Structural Intermetallics and Intermetallic Matrix Composites is a reference written with the beginning student as well as the practicing professional in mind. Utilizing the auth
Download or read book Emerging Engineering Materials written by Mel Schwartz and published by CRC Press. This book was released on 1996-03-21 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Author's Preface The rapid advances in Materials Science and Engineering . . . have convinced many that the design, production and use of advanced materials will shape future manufacturing industries. Competitive advantage within entire industries is shaped by the quality of the materials available to the manufacturers; the early availability of a new material can be leveraged manyfold. In addition, advanced materials or advanced materials processing can signal the birth or death of entire industries, and access to higher quality and lower cost material has permitted some countries to obtain market dominance in several key industries. Much of the new strategy entails harnessing the potential of innovative technology, that is, going back to the nano and molecular states of materials and new, effective ways to create, process, and eventually use them. Rather than being concerned with a relatively small number of generic materials, each possessing a broad range of uses, the materials sector is increasingly concerned with tailoring a growing list of ever more specialized materials for narrow niche applications. New products with better growth prospects such as high-performance alloys, composites, laminates, and a variety of coatings have been emphasized. Materials firms also have sought ways to overcome the weaknesses of ceramics and fully exploit their formidable strengths. "Functional materials" that do more than support structures have been developed for use in sophisticated electronic, optical, magnetic, and biotech applications. This book will . . . show what materials will be available in the next decade or two, in addition to those currently available and their effect on material design, start-up, and production processes.
Download or read book High temperature Ordered Intermetallic Alloys written by and published by . This book was released on 2001 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intermetallics Research Progress written by Yakov N. Berdovsky and published by Nova Publishers. This book was released on 2008 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallics is concerned with all aspects of ordered chemical compounds between two or more metals and notably with their applications. This book covers new and important research on the crystal chemistry and bonding theory of intermetallics; determination and analysis of phase diagrams; the nature of superlattices, antiphase domains and order-disorder transitions; the geometry and dynamics of dislocations and related defects in intermetallics; theory and experiments relating to flow stress, work-hardening, fatigue and creep; response of deformed intermetallics to annealing; magnetic and electrical properties of intermetallics; structure and properties of grain and interphase boundaries; the effect of deviations from stoichiometry on physical and mechanical properties; crystallisation of intermetallics from the melt or amorphous precursors.
