Download or read book High Strain Rate Deformation Mechanisms of Body Centered Cubic Material Subjected to Impact Loading written by William Visser and published by . This book was released on 2017 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Strain Rate Deformation in FCC Metals and Alloys written by and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of strain rate, and particularly of high strain rates, on deformation mechanisms in materials is of fundamental interest to those who model and analyze dynamic loading. In many materials the strain rate sensitivity is known to increase dramatically when the strain rate is raised above approx. 103 s−1. This increase has been interpreted previously as a transmission in deformation mechanism from thermal activation control at low strain rate to dislocation drag control at high strain rate. In copper, copper-aluminum alloys and stainless steel, recent measurements have shown that the increased rate sensitivity found at high strain rates is not due to a transition in deformation mechanism but rather can be explained with standard thermal activation theory. These findings and their implications regarding the formulation of constitutive behavior are presented.
Download or read book Introduction to Unified Mechanics Theory with Applications written by Cemal Basaran and published by Springer Nature. This book was released on 2021-02-02 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes the mathematical formulation and proof of the unified mechanics theory (UMT) which is based on the unification of Newton’s laws and the laws of thermodynamics. It also presents formulations and experimental verifications of the theory for thermal, mechanical, electrical, corrosion, chemical and fatigue loads, and it discusses why the original universal laws of motion proposed by Isaac Newton in 1687 are incomplete. The author provides concrete examples, such as how Newton’s second law, F = ma, gives the initial acceleration of a soccer ball kicked by a player, but does not tell us how and when the ball would come to a stop. Over the course of Introduction to Unified Mechanics Theory, Dr. Basaran illustrates that Newtonian mechanics does not account for the thermodynamic changes happening in a system over its usable lifetime. And in this context, this book explains how to design a system to perform its intended functions safely over its usable life time and predicts the expected lifetime of the system without using empirical models, a process currently done using Newtonian mechanics and empirical degradation/failure/fatigue models which are curve-fit to test data. Written as a textbook suitable for upper-level undergraduate mechanics courses, as well as first year graduate level courses, this book is the result of over 25 years of scientific activity with the contribution of dozens of scientists from around the world including USA, Russia, Ukraine, Belarus, Spain, China, India and U.K.
Download or read book Dynamic Behavior of Materials written by Marc A. Meyers and published by John Wiley & Sons. This book was released on 1994-10-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses fundamentals and advanced topics relevant to the behavior of materials under in-service conditions such as impact, shock, stress and high-strain rate deformations. Deals extensively with materials from a microstructure perspective which is the future direction of research today.
Download or read book The Effect of High Strain Rates on the Flow Stress and Defect Structure of Metals written by J. D. Boyd and published by . This book was released on 1969 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this program has been to elucidate the fundamental mechanisms of high-rate plastic deformation of metals. Single crystal specimens of an fcc metal (Cu) and a bcc metal (Nb) were deformed; the macroscopic yielding behavior was noted for each material as a function of strain rate, and the structures of the deformed crystals were studied by metallographic techniques. In addition to the single-crystal work, a study was made of the character of slip bands in polycrystalline iron and a mild steel as a function of temperature. This permitted comparisons to be made between the behavior of different bcc metals. (Author).
Download or read book Thermally Activated Mechanisms in Crystal Plasticity written by D. Caillard and published by Elsevier. This book was released on 2003-09-08 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: KEY FEATURES: - A unified, fundamental and quantitative resource. The result of 5 years of investigation from researchers around the world - New data from a range of new techniques, including synchrotron radiation X-ray topography provide safer and surer methods of identifying deformation mechanisms - Informing the future direction of research in intermediate and high temperature processes by providing original treatment of dislocation climb DESCRIPTION: Thermally Activated Mechanisms in Crystal Plasticity is a unified, quantitative and fundamental resource for material scientists investigating the strength of metallic materials of various structures at extreme temperatures. Crystal plasticity is usually controlled by a limited number of elementary dislocation mechanisms, even in complex structures. Those which determine dislocation mobility and how it changes under the influence of stress and temperature are of key importance for understanding and predicting the strength of materials. The authors describe in a consistent way a variety of thermally activated microscopic mechanisms of dislocation mobility in a range of crystals. The principles of the mechanisms and equations of dislocation motion are revisited and new ones are proposed. These describe mostly friction forces on dislocations such as the lattice resistance to glide or those due to sessile cores, as well as dislocation cross-slip and climb. They are critically assessed by comparison with the best available experimental results of microstructural characterization, in situ straining experiments under an electron or a synchrotron beam, as well as accurate transient mechanical tests such as stress relaxation experiments. Some recent attempts at atomistic modeling of dislocation cores under stress and temperature are also considered since they offer a complementary description of core transformations and associated energy barriers. In addition to offering guidance and assistance for further experimentation, the book indicates new ways to extend the body of data in particular areas such as lattice resistance to glide.
Download or read book Mechanical Twinning of Crystals written by M. V. Klassen-Neklyudova and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is not confined to mechanical twinning in the narrow sense (lattice reorientation in re sponse to mechanical stress); it deals also with many effects related to mechanical twinning. such as formation of reoriented regions in response to high temperatures (martensite transformations. recrystallization twins). elec tric fields (ferroelectric domains). and magnetiC fields (magnetic domains). Mechanical reorientation is discussed for classical twinning and also for an inhomogeneous distribution of residual stresses (irrational twinning. kinking. and so on). Mechanical twinning in the narrow sense (regular. symmetrical lattice reorientation in response to me chanical stress) was for many years a specialist topic for mineralogists. petrographers. and crystallographers. Mineralogists and crystallographers carried out the study of the basic geometrical relationships in twinning; the principal names here are MUgge, Niggli. Johnsen. Reusch. Baumhauer. Churchman. Wallerant. Evans. and FriedeL The laws of mechanical twinning are now widely used in mineral identification and in elucidating the conditions of formation of rocks from the minerals they contain. The distribution of the twin bands in rock forming minerals enables one to establish the later processes that have occurred in the rock. Mechanical twinning is discussed by geOlogiSts and petrologists in the analYSis of flow effects. The importance of mechanical twinning in the plastic deformation and rupture of crystalline solids was W stressed by Academician V.I. Vernadskii in 1897 and by Kirpicheva ina paper entitled WFatigue in Metals in 1914.
Download or read book Multiscale Modeling of Heterogenous Materials written by Oana Cazacu and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: A material's various proprieties is based on its microscopic and nanoscale structures. This book provides an overview of recent advances in computational methods for linking phenomena in systems that span large ranges of time and spatial scales. Particular attention is given to predicting macroscopic properties based on subscale behaviors. Given the book’s extensive coverage of multi-scale methods for modeling both metallic and geologic materials, it will be an invaluable reading for graduate students, scientists, and practitioners alike.
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Dynamics of Lattice Materials written by A. Srikantha Phani and published by John Wiley & Sons. This book was released on 2017-09-25 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the dynamic response of lattice materials, covering the fundamental theory and applications in engineering practice Offers comprehensive treatment of dynamics of lattice materials and periodic materials in general, including phononic crystals and elastic metamaterials Provides an in depth introduction to elastostatics and elastodynamics of lattice materials Covers advanced topics such as damping, nonlinearity, instability, impact and nanoscale systems Introduces contemporary concepts including pentamodes, local resonance and inertial amplification Includes chapters on fast computation and design optimization tools Topics are introduced using simple systems and generalized to more complex structures with a focus on dispersion characteristics
Download or read book Nanomechanics written by Alexander Vakhrushev and published by BoD – Books on Demand. This book was released on 2017-05-24 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, nanotechnology is the basis for the development of modern production. This determined the urgency of the intensive development of the new direction of mechanics and nanomechanics, for the scientific description of nanotechnological processes and the solution of several topical nanotechnology problems. Topics included in the book cover a wide range of research in the field of nanomechanics: thermomass theory of nanosystems; deformation of nanomaterials; interface mechanics of assembly carbon nanotube; nanomechanics on surface; molecular interactions and transformations; nanomechanical sensors, nanobeams, and micromembranes; nanostructural organic and inorganic materials; green synthesis of metallic nanoparticles. The main goal of these works is the establishment of the nanosystem macroparameter dependence on its nanoparameters using nanomechanics. This book will be useful for engineers, technologists, and researchers interested in methods of nanomechanics and in advanced nanomaterials with complex behavior and their applications.
Download or read book High Strain rate Deformation and Failure of Crystalline Materials written by Mohammed A. Zikry and published by . This book was released on 1990 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
Download or read book A Correlation of the Deformation Mechanisms of Metals Under High Strain Rates written by John Graves Vann and published by . This book was released on 1971 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dislocation Dynamics and Plasticity written by Taira Suzuki and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 1950s the direct observation of dislocations became possible, stimulat ing the interest of many research workers in the dynamics of dislocations. This led to major contributions to the understanding of the plasticity of various crys talline materials. During this time the study of metals and alloys of fcc and hcp structures developed remarkably. In particular, the discovery of the so-called in ertial effect caused by the electron and phonon frictional forces greatly influenced the quantitative understanding of the strength of these metallic materials. Statis tical studies of dislocations moving through random arrays of point obstacles played an important role in the above advances. These topics are described in Chaps. 2-4. Metals and alloys with bcc structure have large Peierls forces compared to those with fcc structure. The reasons for the delay in studying substances with bcc structure were mostly difficulties connected with the purification techniques and with microscopic studies of the dislocation core. In the 1970s, these difficulties were largely overcome by developments in experimental techniques and computer physics. Studies of dislocations in ionic and covalent bonding materials with large Peierls forces provided infonnation about the core structures of dislocations and their electronic interactions with charged particles. These are the main subjects in Chaps. 5-7.
Download or read book The Hardness of Metals written by David Tabor and published by Oxford University Press. This book was released on 2000-08-03 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to explain hardness measurements of metals in terms of some of their more basic physical properties. The intention is to provide, for physicists, engineers, and metallurgists, a better understanding of what hardness means and what hardness measurements imply. The author emphasises the physical concepts involved, so that non-mathematical readers can grasp and appreciate the general physical picture without needing to follow the more detailed mathematical treatment.
