Download or read book Large and Middle scale Aperture Aspheric Surfaces written by Shengyi Li and published by John Wiley & Sons. This book was released on 2017-01-18 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete all-in-one reference to aspheric fabrication and testing for optical applications This book provides a detailed introduction to the manufacturing and measurement technologies in aspheric fabrication. For each technology, both basic theory and practical applications are introduced. The book consists of two parts. In the first part, the basic principles of manufacturing technology for aspheric surfaces and key theory for deterministic subaperture polishing of aspheric surfaces are discussed. Then key techniques for high precision figuring such as CCOS with small polishing pad, IBF and MRF, are introduced, including the basic principles, theories and applications, mathematical modeling methods, machine design and process parameter selection. It also includes engineering practices and experimental results, based on the three kinds of polishing tools (CCOS, IBF and MRF) developed by the author’s research team. In the second part, basic principles of measurement and some typical examples for large and middle-scale aspheric surfaces are discussed. Then, according to the demands of low cost, high accuracy and in-situ measurement methods in the manufacturing process, three kinds of technologies are introduced, such as the Cartesian and swing-arm polar coordinate profilometer, the sub-aperture stitching interferometer and the phase retrieval method based on diffraction principle. Some key techniques are also discussed, including the basic principles, mathematical modeling methods, machine design and process parameter selection, as well as engineering practices and experimental results. Finally, the team’s research results about subsurface quality measurement and guarantee methods are also described. This book can be used as a reference for scientists and technologists working in optical manufacturing, ultra-precision machining, precision instruments and measurement, and other precision engineering fields. A complete all-in-one reference to aspheric fabrication and testing for optical applications Presents the latest research findings from the author’s internationally recognized leading team who are at the cutting edge of the technology Brings together surface processing and measurement in one complete volume, discussing problems and solutions Guides the reader from an introductory overview through to more advanced and sophisticated techniques of metrology and manufacturing, suitable for the student and the industry professional
Download or read book Journal of the Optical Society of America written by Optical Society of America and published by . This book was released on 1981 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro Optics written by H. P. Herzig and published by CRC Press. This book was released on 1997-04-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the technology behind the plethora of modern industrial and domestic technologies which incorporate micro-optics eg. CDs, cameras, automated manufacturing systems, mobile communications etc. It includes a simple but comprehensive introduction to micro-optical developments design, and an overview of fabrication and replication tec
Download or read book Workshop on Optical Fabrication and Testing written by and published by . This book was released on 1984 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Specification Fabrication and Testing written by Jim Schwiegerling and published by . This book was released on 2014 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book connects the dots between geometrical optics, interference and diffraction, and aberrations to illustrate the development of an optical system. It focuses on initial layout, design and aberration analysis, fabrication, and, finally, testing and verification of the individual components and the system performance. It also covers more specialized topics such as fitting Zernike polynomials, representing aspheric surfaces with the Forbes Q polynomials, and testing with the Shack-Hartmann wavefront sensor. These topics are discussed in more detail than is found in other textbooks, and the techniques are developed to the point where readers can pursue their own analyses or modify to their particular situations.
Download or read book Advanced Optics Using Aspherical Elements written by Bernhard Braunecker and published by SPIE Press. This book was released on 2008 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern optical systems rely on leading-edge production technologies, especially when using aspherical optical elements. Due to the inherent complexity of aspheres, all efforts to push the technological limits are risky. Thus, to minimize risk, clear decisions based on a good understanding of technology are indispensable. This compendium is written as an optical technology reference book for development and production engineers. With contributions from worldwide experts, this book aids in mitigating the risk in adopting new asphere production technologies.
Download or read book Principles of Optics written by Max Born and published by CUP Archive. This book was released on 2000-02-28 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Optics is one of the classic science books of the twentieth century, and probably the most influential book in optics published in the past 40 years. The new edition is the first ever thoroughly revised and expanded edition of this standard text. Among the new material, much of which is not available in any other optics text, is a section on the CAT scan (computerized axial tomography), which has revolutionized medical diagnostics. The book also includes a new chapter on scattering from inhomogeneous media which provides a comprehensive treatment of the theory of scattering of scalar as well as of electromagnetic waves, including the Born series and the Rytov series. The chapter also presents an account of the principles of diffraction tomography - a refinement of the CAT scan - to which Emil Wolf, one of the authors, has made a basic contribution by formulating in 1969 what is generally regarded to be the basic theorem in this field. The chapter also includes an account of scattering from periodic potentials and its connection to the classic subject of determining the structure of crystals from X-ray diffraction experiments, including accounts of von Laue equations, Bragg's law, the Ewald sphere of reflection and the Ewald limiting sphere, both generalized to continuous media. These topics, although originally introduced in connection with the theory of X-ray diffraction by crystals, have since become of considerable relevance to optics, for example in connection with deep holograms. Other new topics covered in this new edition include interference with broad-band light, which introduces the reader to an important phenomenon discovered relatively recently by Emil Wolf, namely the generation of shifts of spectral lines and other modifications of spectra of radiated fields due to the state of coherence of a source. There is also a section on the so-called Rayleigh-Sommerfield diffraction theory which, in recent times, has been finding increasing popularity among optical scientists. There are also several new appendices, including one on energy conservation in scalar wavefields, which is seldom discussed in books on optics. The new edition of this standard reference will continue to be invaluable to advanced undergraduates, graduate students and researchers working in most areas of optics.
Download or read book Robert Shannon and Roland Shack written by James E. Harvey and published by SPIE Press. This book was released on 2005 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is presented as a tribute to "two icons from the world of optics"--in the words of editors Harvey (Center for Research and Education in Optics and Lasers, U. of Central Florida) and Hooker (electrical and computer and engineering, U. of Colorado)--both of whom have been affiliated with the Optical Sciences Center at the U. of Arizona. Twenty-one papers from a tribute conference, some highly technical and others more personal, detail the honorees contributions to optics and optics education. These are followed by 45 journal article reprints authored by Bob Shannon and Roland Shack or their students in the technical areas of optical design and analysis, image evaluation, applications of the marginal ray height--chief ray height diagram, optical testing, optical fabrication, phased telescope arrays, aberration theory, propagation effects in the atmosphere, and diffraction/surface scatter phenomena. Finally, 14 short, informal "anecdotes and accolades" of the two scientists are presented from the conference and elsewhere. Annotation :2005 Book News, Inc., Portland, OR (booknews.com).
Download or read book Surface Generation in Ultra precision Diamond Turning written by W. B. Lee and published by John Wiley & Sons. This book was released on 2003-02-07 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Engineering Research Series title. One of the remarkable achievements of modern manufacturing techniques is the ability to achieve nano-metre surface finishes. Ultraprecision machining based on single-point diamond turning (SPDT) is a very important technique in the manufacture of high-precision components where surface finish is critical. Complex optical surfaces, for example, can be produced without the need for post-machining polishing. This book focuses on the aspect of modelling nano-surface generation in ultra precision SPDT. Potential industrial applications in the prediction of surface quality, the process optimization, and precision mould manufacturing are also studies. The essential differences between single-point diamond turning and conventional machining are described. The history and technology of single-point diamond turning are presented and single chapters emphasize the related metrology and cutting mechanics. Important aspects of surface generation are also discussed. Features of the text are the sound approach, systematic mathematical modelling, and computer-aided simulation of surface generation in the development of surfaces exhibiting nano-surface qualities. TOPICS COVERED INCLUDE: Fundamentals of ultra-precision diamond turning technology Cutting mechanics and analysis of microcutting force variation Mechanisms of surface generation Characterization and modelling of nano-surface generation Computer-aided simulation of nano-surface generation Diamond turning of aspheric optics. Based upon the extensive experience of the authors Surface Generation in Ultra-precision Diamond Turning: Modelling and Practices will be of interest to engineers, scientists, and postgraduate students.
Download or read book Handbook of Optoelectronics Two Volume Set written by John P. Dakin and published by CRC Press. This book was released on 2010-12-12 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: A field as diverse as optoelectronics needs a reference that is equally versatile. From basic physics and light sources to devices and state-of-the-art applications, the Handbook of Optoelectronics provides comprehensive, self-contained coverage of fundamental concepts and practical applications across the entire spectrum of disciplines encompassed by optoelectronics. The handbook unifies a broad array of current research areas with a forward-looking focus on systems and applications. Beginning with an introduction to the relevant principles of physics, materials science, engineering, and optics, the book explores the details of optoelectronic devices and techniques including semiconductor lasers, optical detectors and receivers, optical fiber devices, modulators, amplifiers, integrated optics, LEDs, and engineered optical materials. Applications and systems then become the focus, with sections devoted to industrial, medical, and commercial applications, communications, imaging and displays, sensing and data processing, spectroscopic analysis, the art of practical optoelectronics, and future prospects. This extensive resource comprises the efforts of more than 70 world-renowned experts from leading industrial and academic institutions around the world and includes many references to contemporary works. Whether used as a field reference, as a research tool, or as a broad and self-contained introduction to the field, the Handbook of Optoelectronics places everything you need in a unified, conveniently organized format.
Download or read book Optics Design and Precision Manufacturing Technologies written by Guo Fan Jin and published by Trans Tech Publications Ltd. This book was released on 2007-12-06 with total page 1343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Asia Pacific Conference on Optics Manufacture 2007, 11-13 January 2007, Hong Kong, P.R.China
Download or read book 4th International Symposium of Space Optical Instruments and Applications written by H. Paul Urbach and published by Springer. This book was released on 2018-10-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected and expanded contributions presented at the 4th Symposium on Space Optical Instruments and Applications, which was held in Delft, the Netherlands, on October 16–18, 2017. This conference series is organized by the Sino-Holland Space Optical Instruments Laboratory, a cooperative platform between China and the Netherlands. The symposium focused on key technological problems regarding optical instruments and their applications in a space context. It covered the latest developments, experiments and results on the theory, instrumentation and applications of space optics. The book is split into five main sections: The first covers optical remote sensing system design, the second focuses on advanced optical system design, and the third addresses remote sensor calibration and measurement. Remote sensing data processing and information extraction are then presented, followed by a final section on remote sensing data applications.
Download or read book Gradient Index Optics written by Erich Merchand and published by Elsevier. This book was released on 2012-12-02 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gradient Index Optics deals with the application of gradients in optical systems of classical types: gradient index lenses. The emphasis is on the theory and practice related to gradient index lenses. Only isotropic media are considered since they are the ones for which the refractive index at each point is independent of direction. Comprised of 12 chapters, this book begins with a historical background on the use of gradients in astronomy and developments in gradient index lenses, along with the underlying basic theory. The discussion then turns to spherical gradients, paying particular attention to rays, Maxwell's fisheye lens, the Luneburg lens, and astronomical refraction. Subsequent chapters focus on the ray trace in a spherical gradient; axial gradients and their use as an anti-reflection coating; radial gradients and ray tracing in a radial gradient; and fundamentals of aberration theory. The wood lens and ray trace in a general medium are also considered, together with methods for fabrication of gradient elements and measurement of index gradients using an approximate method and interferometric methods. This monograph will be of interest to physicists.
Download or read book Applied Photographic Optics written by Sidney Ray and published by Routledge. This book was released on 2002-02-20 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected by the American Library Association's 'Choice' magazine as "best technical book", the first edition of this book soon established itself as the standard reference work on all aspects of photographic lenses and associated optical systems. This is unsurprising, as Sidney Ray provides a complete, comprehensive reference source for anyone wanting information on photographic lenses, from the student to the practitioner or specialist working with visual and digital media worldwide. This third edition has been fully revised and expanded to include the rapid progress in the last decade in optical technology and advances in relevant electronic and digital forms of imaging. Every chapter has been revised and expanded using new figures and photographs as appropriate, as well as extended bibliographies. New chapters include details of filters, measurements from images and the optical systems of digital cameras. Details of electronic and digital imaging have been integrated throughout. More information is given on topics such as aspherics, diffractive optics, ED glasses, image stabilization, optical technology, video projection and new types of lenses. A selection of the contents includes chapters on: optical theory, aberrations, auto focus, lens testing, depth of field, development of photographic lenses, general properties of lenses, wide-angle lenses, telephoto lenses, video lenses, viewfinder systems, camera movements, projection systems and 3-D systems.
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-30 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Directory of Federal Laboratory Technology Resources written by and published by . This book was released on 1993 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
