Download or read book High Speed and Wide Bandwidth Delta Sigma ADCs written by Muhammed Bolatkale and published by Springer. This book was released on 2014-05-27 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes techniques for realizing wide bandwidth (125MHz) over-sampled analog-to-digital converters (ADCs) in nano meter-CMOS processes. The authors offer a clear and complete picture of system level challenges and practical design solutions in high-speed Delta-Sigma modulators. Readers will be enabled to implement ADCs as continuous-time delta-sigma (CT∆Σ) modulators, offering simple resistive inputs, which do not require the use of power-hungry input buffers, as well as offering inherent anti-aliasing, which simplifies system integration. The authors focus on the design of high speed and wide-bandwidth ΔΣMs that make a step in bandwidth range which was previously only possible with Nyquist converters. More specifically, this book describes the stability, power efficiency and linearity limits of ΔΣMs, aiming at a GHz sampling frequency.
Download or read book High Speed and Wide Bandwidth Delta sigma ADCs written by Muhammed Bolatkale and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuous Time Sigma Delta A D Conversion written by Friedel Gerfers and published by Springer Science & Business Media. This book was released on 2006-02-27 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sigma-delta A/D converters are a key building block in wireless and multimedia applications. This comprehensive book deals with all relevant aspects arising during the analysis, design and simulation of the now widespread continuous-time implementations of sigma-delta modulators. The results of several years of research by the authors in the field of CT sigma-delta modulators are covered, including the analysis and modeling of different CT modulator architectures, CT/DT loop filter synthesis, a detailed error analysis of all components, and possible compensation/correction schemes for the non-ideal behavior in CT sigma-delta modulators. Guidance for obtaining low-power consumption and several practical implementations are also presented. It is shown that all the proposed new theories, architectures and possible correction techniques have been confirmed by measurements on discrete or integrated circuits. Quantitative results are also provided, thus enabling prediction of the resulting accuracy.
Download or read book Continuous Time Delta Sigma Modulators for High Speed A D Conversion written by James A. Cherry and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among analog-to-digital converters, the delta-sigma modulator has cornered the market on high to very high resolution converters at moderate speeds, with typical applications such as digital audio and instrumentation. Interest has recently increased in delta-sigma circuits built with a continuous-time loop filter rather than the more common switched-capacitor approach. Continuous-time delta-sigma modulators offer less noisy virtual ground nodes at the input, inherent protection against signal aliasing, and the potential to use a physical rather than an electrical integrator in the first stage for novel applications like accelerometers and magnetic flux sensors. More significantly, they relax settling time restrictions so that modulator clock rates can be raised. This opens the possibility of wideband (1 MHz or more) converters, possibly for use in radio applications at an intermediate frequency so that one or more stages of mixing might be done in the digital domain. Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion: Theory, Practice and Fundamental Performance Limits covers all aspects of continuous-time delta-sigma modulator design, with particular emphasis on design for high clock speeds. The authors explain the ideal design of such modulators in terms of the well-understood discrete-time modulator design problem and provide design examples in Matlab. They also cover commonly-encountered non-idealities in continuous-time modulators and how they degrade performance, plus a wealth of material on the main problems (feedback path delays, clock jitter, and quantizer metastability) in very high-speed designs and how to avoid them. They also give a concrete design procedure for a real high-speed circuit which illustrates the tradeoffs in the selection of key parameters. Detailed circuit diagrams, simulation results and test results for an integrated continuous-time 4 GHz band-pass modulator for A/D conversion of 1 GHz analog signals are also presented. Continuous-Time Delta-Sigma Modulators for High-Speed A/D Conversion: Theory, Practice and Fundamental Performance Limits concludes with some promising modulator architectures and a list of the challenges that remain in this exciting field.
Download or read book Next Generation ADCs High Performance Power Management and Technology Considerations for Advanced Integrated Circuits written by Andrea Baschirotto and published by Springer Nature. This book was released on 2019-10-24 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 28th workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, including next-generation analog-to-digital converters , high-performance power management systems and technology considerations for advanced IC design. For anyone involved in analog circuit research and development, this book will be a valuable summary of the state-of-the-art in these areas. Provides a summary of the state-of-the-art in analog circuit design, written by experts from industry and academia; Presents material in a tutorial-based format; Includes coverage of next-generation analog-to-digital converters, high-performance power management systems, and technology considerations for advanced IC design.
Download or read book Power Efficient High Speed Parallel Sampling ADCs for Broadband Multi carrier Systems written by Yu Lin and published by Springer. This book was released on 2015-05-07 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the challenges of designing high performance analog-to-digital converters (ADCs) based on the “smart data converters” concept, which implies context awareness, on-chip intelligence and adaptation. Readers will learn to exploit various information either a-priori or a-posteriori (obtained from devices, signals, applications or the ambient situations, etc.) for circuit and architecture optimization during the design phase or adaptation during operation, to enhance data converters performance, flexibility, robustness and power-efficiency. The authors focus on exploiting the a-priori knowledge of the system/application to develop enhancement techniques for ADCs, with particular emphasis on improving the power efficiency of high-speed and high-resolution ADCs for broadband multi-carrier systems.
Download or read book Wideband Continuous time ADCs Automotive Electronics and Power Management written by Andrea Baschirotto and published by Springer. This book was released on 2016-08-12 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 25th workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, including low-power and energy-efficient analog electronics, with specific contributions focusing on the design of continuous-time sigma-delta modulators, automotive electronics, and power management. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.
Download or read book Understanding Delta Sigma Data Converters written by Shanthi Pavan and published by John Wiley & Sons. This book was released on 2017-01-24 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition introduces operation and design techniques for Sigma-Delta converters in physical and conceptual terms, and includes chapters which explore developments in the field over the last decade Includes information on MASH architectures, digital-to-analog converter (DAC) mismatch and mismatch shaping Investigates new topics including continuous-time ΔΣ analog-to-digital converters (ADCs) principles and designs, circuit design for both continuous-time and discrete-time ΔΣ ADCs, decimation and interpolation filters, and incremental ADCs Provides emphasis on practical design issues for industry professionals
Download or read book Design of a Wideband Quadrature Continuous time Delta sigma ADC microform written by Navid Yaghini and published by Library and Archives Canada = Bibliothèque et Archives Canada. This book was released on 2004 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Delta-sigma (DeltaSigma) modulation is a popular technique for making high resolution analog to digital and digital to analog converters (ADC and DAC). This thesis outlines a design procedure for a low power, wide bandwidth, 4th order continuous-time complex bandpass DeltaSigma ADC. System level simulations of the modulator are used to examine the behavior of the modulator in presence of moderate circuit imperfections. The modulator was designed and fabricated in TSMC's 0.18mum CMOS technology. The ADC achieves 68.8dB SNDR in a 23MHz signal bandwidth while consuming 42.6mW from a 1.8V supply. The core area of the IC is 0.95mm2. This work demonstrates the feasibility of implementing a high-resolution high-speed DeltaSigma ADC suitable for a low-IF receiver in deep sub-micron technology using low-gain opamps.
Download or read book Sigma Delta Converters Practical Design Guide written by Jose M. de la Rosa and published by John Wiley & Sons. This book was released on 2018-11-05 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and expanded to help readers systematically increase their knowledge and insight about Sigma-Delta Modulators Sigma-Delta Modulators (SDMs) have become one of the best choices for the implementation of analog/digital interfaces of electronic systems integrated in CMOS technologies. Compared to other kinds of Analog-to-Digital Converters (ADCs), Σ∆Ms cover one of the widest conversion regions of the resolution-versus-bandwidth plane, being the most efficient solution to digitize signals in an increasingly number of applications, which span from high-resolution low-bandwidth digital audio, sensor interfaces, and instrumentation, to ultra-low power biomedical systems and medium-resolution broadband wireless communications. Following the spirit of its first edition, Sigma-Delta Converters: Practical Design Guide, 2nd Edition takes a comprehensive look at SDMs, their diverse types of architectures, circuit techniques, analysis synthesis methods, and CAD tools, as well as their practical design considerations. It compiles and updates the current research reported on the topic, and explains the multiple trade-offs involved in the whole design flow of Sigma-Delta Modulators—from specifications to chip implementation and characterization. The book follows a top-down approach in order to provide readers with the necessary understanding about recent advances, trends, and challenges in state-of-the-art Σ∆Ms. It makes more emphasis on two key points, which were not treated so deeply in the first edition: It includes a more detailed explanation of Σ∆Ms implemented using Continuous-Time (CT) circuits, going from system-level synthesis to practical circuit limitations. It provides more practical case studies and applications, as well as a deeper description of the synthesis methodologies and CAD tools employed in the design of Σ∆ converters. Sigma-Delta Converters: Practical Design Guide, 2nd Edition serves as an excellent textbook for undergraduate and graduate students in electrical engineering as well as design engineers working on SD data-converters, who are looking for a uniform and self-contained reference in this hot topic. With this goal in mind, and based on the feedback received from readers, the contents have been revised and structured to make this new edition a unique monograph written in a didactical, pedagogical, and intuitive style.
Download or read book Analog to Digital Conversion written by Marcel Pelgrom and published by Springer. This book was released on 2016-09-29 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is appropriate for use in graduate-level curricula in analog-to-digital conversion, as well as for practicing engineers in need of a state-of-the-art reference on data converters. It discusses various analog-to-digital conversion principles, including sampling, quantization, reference generation, nyquist architectures and sigma-delta modulation. This book presents an overview of the state of the art in this field and focuses on issues of optimizing accuracy and speed, while reducing the power level. This new, third edition emphasizes novel calibration concepts, the specific requirements of new systems, the consequences of 22-nm technology and the need for a more statistical approach to accuracy. Pedagogical enhancements to this edition include additional, new exercises, solved examples to introduce all key, new concepts and warnings, remarks and hints, from a practitioner's perspective, wherever appropriate. Considerable background information and practical tips, from designing a PCB, to lay-out aspects, to trade-offs on system level, complement the discussion of basic principles, making this book a valuable reference for the experienced engineer.
Download or read book CMOS MIXED SIGNAL CIRCUIT DESIGN written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008-06 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Features: · Written by the author of the best-seller, CMOS: Circuit Design, Layout, and Simulation· Fills a hole in the technical literature for an advanced-tutorial book on mixed-signal circuit design from a circuit designer's point of view· Presents more advance topics, and will be an excellent companion to the first volume About The Book: This book will fill a hole in the technical literature for an advanced-tutorial book on mixed-signal circuit design. There are no competitors in this area. Mixed-signal design is performed in industry by a select few gurus . The techniques can be found in hard-to-digest technical papers.
Download or read book Analog to Digital Conversion written by Marcel J.M. Pelgrom and published by Springer Nature. This book was released on 2022-03-15 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is appropriate for use in graduate-level curricula in analog-to-digital conversion, as well as for practicing engineers in need of a state-of-the-art reference on data converters. It discusses various analog-to-digital conversion principles, including sampling, quantization, reference generation, Nyquist architectures and sigma-delta modulation. This book presents an overview of the state-of-the-art in this field and focuses on issues of optimizing accuracy and speed, while reducing the power level. This new, fourth edition emphasizes novel calibration concepts, the specific requirements of systems, the consequences of advanced technology and the need for a more statistical approach to accuracy. Pedagogical enhancements to this edition include additional, new exercises, solved examples to introduce all key, new concepts and warnings, remarks and hints, from a practitioner's perspective, wherever appropriate. Considerable background information and practical tips, from designing a PCB, to lay-out aspects, to trade-offs on system level, complement the discussion of basic principles, making this book a valuable reference for the experienced engineer.
Download or read book Principles of Data Conversion System Design written by Behzad Razavi and published by Wiley-IEEE Press. This book was released on 1995 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This advanced text and reference covers the design and implementation of integrated circuits for analog-to-digital and digital-to-analog conversion. It begins with basic concepts and systematically leads the reader to advanced topics, describing design issues and techniques at both circuit and system level. Gain a system-level perspective of data conversion units and their trade-offs with this state-of-the art book. Topics covered include: sampling circuits and architectures, D/A and A/D architectures; comparator and op amp design; calibration techniques; testing and characterization; and more!
Download or read book The Application of Artificial Intelligence in Brain Computer Interface and Neural System Rehabilitation written by Fangzhou Xu and published by Frontiers Media SA. This book was released on 2023-11-15 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Superconductivity written by H. Weinstock and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, in essence the proceedings of a NATO Advanced Study Institute with the same title, is designed to provide in-depth coverage of many, but not all, of the major current applications of superconductivity, and of many that still are being developed. It will be of value to scientists and engineers who have interests in the research and production aspects of the technology, as well as in the applications themselves. The ftrst three chapters (by Clarke, Vrba and Wikswo) are devoted to an understanding of the principles, fabrication and uses of SQUID magnetometers and gradiometers, with the greatest emphasis on biomagnetism and nondestructive evaluation (NDE). For the most part, traditional low-temperature superconductor (LTS) SQUIDs are used, but particularly for NDE, high-temperature superconductor (HTS) SQUIDs are proving useful and often more convenient. The succeeding three chapters (by Przybysz, Likharev and Chaloupka) cover broader aspects of superconducting electronics. The ftrst two of these deal primarily with digital L TS circuits, while the third discusses in great detail passive component applications using HTS materials. Currently, HTS ftlters are undergoing intense J3-site testing at cellular telephone base stations. While it is clear that HTS ftlters outperform conventional ftlters in reducing signal loss and allowing for more channels in a given bandwidth, it isn't yet certain that the cellular telephone industry sees sufficient economic beneftts to make a ftrm decision to use HTS ftlters universally in its systems. If this application is generally adapted, the market for these ftlters should be quite large.
Download or read book Design of Multi Bit Delta Sigma A D Converters written by Yves Geerts and published by Springer Science & Business Media. This book was released on 2005-12-30 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses both architecture and circuit design aspects of Delta-Sigma A/D converters, with a special focus on multi-bit implementations. The emphasis is on high-speed high-resolution converters in CMOS for ADSL applications, although the material can also be applied for other specification goals and technologies.
