Download or read book High resolution Three dimensional Plume Modeling with Eulerian Atmospheric Chemistry and Transport Models written by Fernando Garcia Menendez and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Eulerian chemical transport models are extensively used to steer environmental policy, forecast air quality and study atmospheric processes. However, the ability of these models to simulate concentrated atmospheric plumes, including fire-related smoke, may be limited. Wildland fires are important sources of air pollutants and can significantly affect air quality. Emissions released in wildfires and prescribed burns have been known to substantially increase the air pollution burden at urban locations across large regions. Air quality forecasts generated with numerical models can provide valuable information to environmental regulators and land managers about the potential impacts of fires. Eulerian models present an attractive framework to simulate the transport and transformation of fire emissions. Still, the limitations inherent to chemical transport models when applied to replicate smoke plumes must be identified and well understood to adequately interpret results and further improve the models' predictive skills. Here, a modeling framework centered on the Community Multiscale Air Quality modeling system (CMAQ) is used to simulate several fire episodes that occurred in the Southeastern U.S. and investigate the sensitivity of fine particulate matter concentration predictions to various model inputs and parameters. Significant sources of uncertainty in the model are identified and discussed, including the spatiotemporal allocation of fire emissions and meteorological drivers. In addition, special attention is given to model grid resolution. Adaptive grid modeling is explored as a strategy to simulate fire-related plumes. An adaptive version of CMAQ, capable of dynamically restructuring the grid on which solution fields are estimated and providing refinement at the regions where accuracy is most dependent on resolution, is presented. The fully adaptive three-dimensional modeling technique can be applied to reach unprecedented levels of grid resolution and provide insight into plume dynamics unattainable with static grid models. Through this work the capability of current chemical transport models to replicate fire-related air quality impacts is evaluated, key research needs to achieve effective simulations are identified, and numerical tools designed to improve model performance are developed.
Download or read book Air Pollution Modeling written by P. Zannetti and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finishing this book is giving me a mixture of relief, satisfaction and frus tration. Relief, for the completion of a project that has taken too many of my evenings and weekends and that, in the last several months, has become almost an obsession. Satisfaction, for the optimistic feeling that this book, in spite of its many shortcomings and imbalances, will be of some help to the air pollution scientific community. Frustration, for the impossibility of incorporating newly available material that would require another major review of several key chap ters - an effort that is currently beyond my energies but not beyond my desires. The first canovaccio of this book came out in 1980 when I was invited by Computational Mechanics in the United Kingdom to give my first Air Pollution Modeling course. The course material, in the form of transparencies, expanded, year after year, thus providing a growing working basis. In 1985, the ECC Joint Research Center in Ispra, Italy, asked me to prepare a critical survey of mathe matical models of atmospheric pollution, transport and deposition. This support gave me the opportunity to prepare a sort of "first draft" of the book, which I expanded in the following years.
Download or read book Modeling of Atmospheric Chemistry written by Guy P. Brasseur and published by Cambridge University Press. This book was released on 2017-06-19 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling of atmospheric composition is a formidable scientific and computational challenge. This comprehensive presentation of the modeling methods used in atmospheric chemistry focuses on both theory and practice, from the fundamental principles behind models, through to their applications in interpreting observations. An encyclopaedic coverage of methods used in atmospheric modeling, including their advantages and disadvantages, makes this a one-stop resource with a large scope. Particular emphasis is given to the mathematical formulation of chemical, radiative, and aerosol processes; advection and turbulent transport; emission and deposition processes; as well as major chapters on model evaluation and inverse modeling. The modeling of atmospheric chemistry is an intrinsically interdisciplinary endeavour, bringing together meteorology, radiative transfer, physical chemistry and biogeochemistry, making the book of value to a broad readership. Introductory chapters and a review of the relevant mathematics make this book instantly accessible to graduate students and researchers in the atmospheric sciences.
Download or read book Environmental Systems Science written by Daniel A. Vallero and published by Elsevier. This book was released on 2021-05-27 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Systems Science: Theory and Practical Applications looks at pollution and environmental quality from a systems perspective. Credible human and ecological risk estimation and prediction methods are described, including life cycle assessment, feasibility studies, pollution control decision tools, and approaches to determine adverse outcome pathways, fate and transport, sampling and analysis, and cost-effectiveness. The book brings translational science to environmental quality, applying groundbreaking methodologies like informatics, data mining, and applications of secondary data systems. Multiple human and ecological variables are introduced and integrated to support calculations that aid environmental and public health decision making. The book bridges the perspectives of scientists, engineers, and other professionals working in numerous environmental and public health fields addressing problems like toxic substances, deforestation, climate change, and loss of biological diversity, recommending sustainable solutions to these and other seemingly intractable environmental problems. The causal agents discussed include physical, chemical, and biological agents, such as per- and polyfluoroalkyl substances (PFAS), SARS-CoV-2 (the COVID-19 virus), and other emerging contaminants. - Provides an optimistic and interdisciplinary approach, underpinned by scientific first principles and theory to evaluate pollutant sources and sinks, applying biochemodynamic methods, measurements and models - Deconstructs prior initiatives in environmental assessment and management using an interdisciplinary approach to evaluate what has worked and why - Lays out a holistic understanding of the real impact of human activities on the current state of pollution, linking the physical sciences and engineering with socioeconomic, cultural perspectives, and environmental justice - Takes a life cycle view of human and ecological systems, from the molecular to the planetary scale, integrating theories and tools from various disciplines to assess the current and projected states of environmental quality - Explains the elements of risk, reliability and resilience of built and natural systems, including discussions of toxicology, sustainability, and human-pollutant interactions based on spatial, biological, and human activity information, i.e. the exposome
Download or read book The European Nitrogen Assessment written by Mark A. Sutton and published by Cambridge University Press. This book was released on 2011-04-14 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the first continental-scale assessment of reactive nitrogen in the environment, this book sets the related environmental problems in context by providing a multidisciplinary introduction to the nitrogen cycle processes. Issues of upscaling from farm plot and city to national and continental scales are addressed in detail with emphasis on opportunities for better management at local to global levels. The five key societal threats posed by reactive nitrogen are assessed, providing a framework for joined-up management of the nitrogen cycle in Europe, including the first cost-benefit analysis for different reactive nitrogen forms and future scenarios. Incorporating comprehensive maps, a handy technical synopsis and a summary for policy makers, this landmark volume is an essential reference for academic researchers across a wide range of disciplines, as well as stakeholders and policy makers. It is also a valuable tool in communicating the key environmental issues and future challenges to the wider public.
Download or read book Air Pollution Modeling and Its Application XII written by Sven-Erik Gryning and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Twenty-Second NATO/CCMS International Technical Meeting held in Clermont-Ferrand, France, June 2-6, 1997
Download or read book Landscape Fire Smoke and Health written by Tatiana V. Loboda and published by John Wiley & Sons. This book was released on 2023-10-11 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Landscape Fire, Smoke, and Health Linking Biomass Burning Emissions to Human Well-Being Where and when wildfires occur, what pollutants they emit, how the chemistry of smoke changes in the atmosphere, and what impact this air pollution has on human health and well-being are questions explored across different scientific disciplines. Landscape Fire, Smoke, and Health: Linking Biomass Burning Emissions to Human Well-Being is designed to create a foundational knowledge base allowing interdisciplinary teams to interact more effectively in addressing the impacts of air pollution from biomass burning on human health. Volume highlights include: Core concepts, principles, and terminology related to smoke and air quality used in different disciplines Observational and modeling tools and approaches in fire science Methods to sense, model, and map smoke in the atmosphere Impacts of biomass burning smoke on the health and well-being of children and adults Perspectives from researchers, modelers, and practitioners Case studies from different countries Information to support decision-making and policy The American Geophysical Union promotes discovery in Earth and space science for the benefit of humanity. Its publications disseminate scientific knowledge and provide resources for researchers, students, and professionals.
Download or read book 2018 CFR Annual Print Title 40 Protection of Environment Parts 50 to 51 written by Office of The Federal Register and published by IntraWEB, LLC and Claitor's Law Publishing. This book was released on 2018-07-01 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Title 40 Protection of Environment - Parts 50 to 51
Download or read book Air Pollution Modeling and its Application XXVII written by Clemens Mensink and published by Springer Nature. This book was released on 2021-11-13 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended as reference material for students and professors interested in air pollution modeling at the graduate level as well as researchers and professionals involved in developing and utilizing air pollution models. Current developments in air pollution modeling are explored as a series of contributions from researchers at the forefront of their field. This newest contribution on air pollution modeling and its application is focused on local, urban, regional and intercontinental modeling; emission modeling and processing; data assimilation and air quality forecasting; model assessment and evaluation; aerosol transformation. Additionally, this work also examines the relationship between air quality and human health and the effects of climate change on air quality. This work is a collection of selected papers presented at the 37th International Technical Meeting on Air Pollution Modeling and its Application, held in Hamburg, Germany, September 23-27, 2019.
Download or read book Atmospheric Pollution and Environmental Change written by Sarah Metcalfe and published by Routledge. This book was released on 2014-05-01 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atmospheric Pollution and Environmental Change is an introduction to the major pollutants causing concern today, a description of their sources and how their emissions and concentrations have changed through time. Approaching atmospheric change in the context of its effects on the natural environment, people and the global climate system, Atmospheric Pollution and Environmental Change examines: ·Atmospheric pollution at global, continental and local scales ·The development of policy at national and international levels ·The uses of computer models to help us understand and forecast the behaviour of pollutants and their impacts ·The success (or otherwise) of policies designed to reduce air pollution and the prospects for the future. With extensive references to useful web sites and further reading, Atmospheric Pollution and Environmental Change will be of great benefit to senior undergraduate and postgraduate students.
Download or read book Atmospheric and Dispersion Modeling in Areas of Highly Complex Terrain Employing a Four dimensional Data Assimilation Technique written by and published by . This book was released on 1994 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The results of this study indicate that the current data assimilation technique can have a positive impact on the mesoscale flow fields; however, care must be taken in its application to grids of relatively fine horizontal resolution. Continuous FDDA is a useful tool in producing high-resolution mesoscale analysis fields that can be used to (1) create a better initial conditions for mesoscale atmospheric models and (2) drive transport models for dispersion studies. While RAMS is capable of predicting the qualitative flow during this evening, additional experiments need to be performed to improve the prognostic forecasts made by RAMS and refine the FDDA procedure so that the overall errors are reduced even further. Despite the fact that a great deal of computational time is necessary in executing RAMS and LPDM in the configuration employed in this study, recent advances in workstations is making applications such as this more practical. As the speed of these machines increase in the next few years, it will become feasible to employ prognostic, three-dimensional mesoscale/transport models to routinely predict atmospheric dispersion of pollutants, even to highly complex terrain. For example, the version of RAMS in this study could be run in a ''nowcasting'' model that would continually assimilate local and regional observations as soon as they become available. The atmospheric physics in the model would be used to determine the wind field where no observations are available. The three-dimensional flow fields could be used as dynamic initial conditions for a model forecast. The output from this type of modeling system will have to be compared to existing diagnostic, mass-consistent models to determine whether the wind field and dispersion forecasts are significantly improved.
Download or read book Principles of Environmental Physics written by John Monteith and published by Butterworth-Heinemann. This book was released on 1990-02-15 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and up-dated edition of a highly successful textbook.
Download or read book Inventory of Federal Energy related Environment and Safety Research for written by and published by . This book was released on 1979 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1988 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tropospheric Modelling and Emission Estimation written by Adolf Ebel and published by Springer Science & Business Media. This book was released on 1997-09-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The end result of policy-related experimental and theoretical scientific work on the abatement of atmospheric emissions is a hierarchy of computer models that can be used to analyse and predict the behaviour of pollutants on urban, local regional and global scales. Such models are required to simulate an extremely complex natural situation in which a non-linear chemistry must be included together with the vagaries of the meteorology and the terrain. This book describes recent advances in the development and application of models on all scales, and in the techniques for the estimation and verification of emissions. It includes reviews of recent work together with detailed results and provides a useful picture of the field in a European context.
Download or read book Air Quality Modeling Fundamentals written by Domenico Anfossi and published by Envirocomp. This book was released on 2003 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reference Book
Download or read book Air Pollution in the Ural Mountains written by Igor Linkov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mankind has created pollution, and has suffered its consequences since time immemorial. This has intesified greatly since the industrial revolution. One of the main problems in society, and a major function of government is how to cope with this pollution. 80 years ago the maxim used to be "the solution to pollution is dilution"; to dilute any pollted water supply in a large river, or to build a tall chimney stack to dilute air pollutants into the air so that concentrations of pollutants are always low. Since 1950 western countries have gone further and made major attempts to reduce the emissions of the most important pollutants. The discussion of what is an important pollutant has changed. To S02 and heavy metals such as cadmium or arsenic we now add fine particles and even (when we discuss global climate change) C02. The experience and practice of the western countries was only partly followed in the USSR (although the switch from use of coal to natural gas in major cities around 1970 was very important). Since the collapse of the USSR it has become fashionable both in the west and inside Russia to blame all society's ills on pollution. The statistics do not bear out that conclusion, but pollution remains an important issue which can be reduced without significant detriment to other societal values.
