Download or read book Very High Resolution Photoelectron Spectroscopy written by Stephan Hüfner and published by Springer Science & Business Media. This book was released on 2007-02-09 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoemission spectroscopy is one of the most extensively used methods to study the electronic structure of atoms, molecules, and solids and their surfaces. This volume introduces and surveys the field at highest energy and momentum resolutions allowing for a new range of applications, in particular for studies of high temperature superconductors.
Download or read book Photoelectron Spectroscopy written by Shigemasa Suga and published by Springer. This book was released on 2013-09-07 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectron spectroscopy is now becoming more and more required to investigate electronic structures of various solid materials in the bulk, on surfaces as well as at buried interfaces. The energy resolution was much improved in the last decade down to 1 meV in the low photon energy region. Now this technique is available from a few eV up to 10 keV by use of lasers, electron cyclotron resonance lamps in addition to synchrotron radiation and X-ray tubes. High resolution angle resolved photoelectron spectroscopy (ARPES) is now widely applied to band mapping of materials. It attracts a wide attention from both fundamental science and material engineering. Studies of the dynamics of excited states are feasible by time of flight spectroscopy with fully utilizing the pulse structures of synchrotron radiation as well as lasers including the free electron lasers (FEL). Spin resolved studies also made dramatic progress by using higher efficiency spin detectors and two dimensional spin detectors. Polarization dependent measurements in the whole photon energy spectrum of the spectra provide useful information on the symmetry of orbitals. The book deals with the fundamental concepts and approaches for the application of this technique to materials studies. Complementary techniques such as inverse photoemission, photoelectron diffraction, photon spectroscopy including infrared and X-ray and scanning tunneling spectroscopy are presented. This book provides not only a wide scope of photoelectron spectroscopy of solids but also extends our understanding of electronic structures beyond photoelectron spectroscopy.
Download or read book High Resolution Spectroscopy written by J. Michael Hollas and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Resolution Spectroscopy discusses the underlying concepts in the different branches of spectroscopy, especially in high resolution spectroscopy. The coverage of the book includes basic principles such as the quantization of energy, as well as the interaction of electromagnetic radiation with atoms and molecules; general experimental methods and features of instrumentation; and microwave, millimeter wave, and lamb dip spectroscopy. Also covered in the book are subjects such as the principles behind rotational spectroscopy; diatomic and polyatomic molecules in vibrational spectroscopy; and the electronic spectroscopy of atoms, as well as diatomic and polyatomic molecules. The text is recommended for engineers and physicists who would like to know more about the concepts, theories, methods, and instrumentation related to spectroscopy, particularly in the field of high resolution spectroscopy.
Download or read book Quantitative Core Level Photoelectron Spectroscopy written by Juan A Colón Santana and published by Morgan & Claypool Publishers. This book was released on 2016-01-01 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoemission (also known as photoelectron) spectroscopy refers to the process in which an electron is removed from a specimen after the atomic absorption of a photon. The first evidence of this phenomenon dates back to 1887 but it was not until 1905 that Einstein offered an explanation of this effect, which is now referred to as ""the photoelectric effect"". Quantitative Core Level Photoelectron Spectroscopy: A Primer tackles the pragmatic aspects of the photoemission process with the aim of introducing the reader to the concepts and instrumentation that emerge from an experimental approach. The basic elements implemented for the technique are discussed and the geometry of the instrumentation is explained. The book covers each of the features that have been observed in the X-ray photoemission spectra and provides the tools necessary for their understanding and correct identification. Charging effects are covered in the penultimate chapter with the final chapter bringing closure to the basic uses of the X-ray photoemission process, as well as guiding the reader through some of the most popular applications used in current research.
Download or read book Photoelectron Spectroscopy written by Stefan Hüfner and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectron Spectroscopy presents an up-to-date introduction to the field by comprehensively treating the electronic structures of atoms, molecules, solids, and surfaces. Brief descriptions are given of inverse photoemission, spin-polarized photoemission and photoelectron diffraction. Experimental aspects are considered throughout the book and the results are carefully interpreted in terms of the theory. A wealth of measured data is presented in tabulator form for easy use by experimentalists.
Download or read book Hard X ray Photoelectron Spectroscopy HAXPES written by Joseph Woicik and published by Springer. This book was released on 2015-12-26 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first complete and up-to-date summary of the state of the art in HAXPES and motivates readers to harness its powerful capabilities in their own research. The chapters are written by experts. They include historical work, modern instrumentation, theory and applications. This book spans from physics to chemistry and materials science and engineering. In consideration of the rapid development of the technique, several chapters include highlights illustrating future opportunities as well.
Download or read book ESCA Applied to Free Molecules written by Kai Siegbahn and published by North-Holland. This book was released on 1970 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic and Photoelectron Spectroscopy written by Andrew M. Ellis and published by Cambridge University Press. This book was released on 2005-01-13 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic and photoelectron spectroscopy can provide extraordinarily detailed information on the properties of molecules and are in widespread use in the physical and chemical sciences. Applications extend beyond spectroscopy into important areas such as chemical dynamics, kinetics and atmospheric chemistry. This book aims to provide the reader with a firm grounding of the basic principles and experimental techniques employed. The extensive use of case studies effectively illustrates how spectra are assigned and how information can be extracted, communicating the matter in a compelling and instructive manner. Topics covered include laser-induced fluorescence, resonance-enhanced multiphoton ionization, cavity ringdown and ZEKE spectroscopy. The volume is for advanced undergraduate and graduate students taking courses in spectroscopy and will also be useful to anyone encountering electronic and/or photoelectron spectroscopy during their research.
Download or read book Molecular Photoelectron Spectroscopy written by David Warren Turner and published by Wiley-Interscience. This book was released on 1970 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of High resolution Spectroscopy written by Martin Quack and published by John Wiley & Sons. This book was released on 2011-09-26 with total page 2236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of High-Resolution Spectroscopy has been considerably extended and even redefined in some areas. Combining the knowledge of spectroscopy, laser technology, chemical computation, and experiments, Handbook of High-Resolution Spectroscopy provides a comprehensive survey of the whole field as it presents itself today, with emphasis on the recent developments. This essential handbook for advanced research students, graduate students, and researchers takes a systematic approach through the range of wavelengths and includes the latest advances in experiment and theory that will help and guide future applications. The first comprehensive survey in high-resolution molecular spectroscopy for over 15 years Brings together the knowledge of spectroscopy, laser technology, chemical computation and experiments Brings the reader up-to-date with the many advances that have been made in recent times Takes the reader through the range of wavelengths, covering all possible techniques such as Microwave Spectroscopy, Infrared Spectroscopy, Raman Spectroscopy, VIS, UV and VUV Combines theoretical, computational and experimental aspects Has numerous applications in a wide range of scientific domains Edited by two leaders in this field Provides an overview of rotational, vibration, electronic and photoelectron spectroscopy Volume 1 - Introduction: Fundamentals of Molecular Spectroscopy Volume 2 - High-Resolution Molecular Spectroscopy: Methods and Results Volume 3 - Special Methods & Applications
Download or read book Spectroscopy for Materials Characterization written by Simonpietro Agnello and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: SPECTROSCOPY FOR MATERIALS CHARACTERIZATION Learn foundational and advanced spectroscopy techniques from leading researchers in physics, chemistry, surface science, and nanoscience In Spectroscopy for Materials Characterization, accomplished researcher Simonpietro Agnello delivers a practical and accessible compilation of various spectroscopy techniques taught and used to today. The book offers a wide-ranging approach taught by leading researchers working in physics, chemistry, surface science, and nanoscience. It is ideal for both new students and advanced researchers studying and working with spectroscopy. Topics such as confocal and two photon spectroscopy, as well as infrared absorption and Raman and micro-Raman spectroscopy, are discussed, as are thermally stimulated luminescence and spectroscopic studies of radiation effects on optical materials. Each chapter includes a basic introduction to the theory necessary to understand a specific technique, details about the characteristic instrumental features and apparatuses used, including tips for the appropriate arrangement of a typical experiment, and a reproducible case study that shows the discussed techniques used in a real laboratory. Readers will benefit from the inclusion of: Complete and practical case studies at the conclusion of each chapter to highlight the concepts and techniques discussed in the material Citations of additional resources ideal for further study A thorough introduction to the basic aspects of radiation matter interaction in the visible-ultraviolet range and the fundamentals of absorption and emission A rigorous exploration of time resolved spectroscopy at the nanosecond and femtosecond intervals Perfect for Master and Ph.D. students and researchers in physics, chemistry, engineering, and biology, Spectroscopy for Materials Characterization will also earn a place in the libraries of materials science researchers and students seeking a one-stop reference to basic and advanced spectroscopy techniques.
Download or read book Molten Salt Chemistry written by Gleb Mamantov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molten salts are of considerable significance to chemical technology. Applications range from the established ones, such as the production of aluminum, magnesium, sodium and fluorine, to those as yet to be fully exploited, such as molten salt batteries and fuel cells, catalysis, and solar energy. Molten salts are investigated for different purposes by many diverse techniques. There is a need to keep investigators working in different areas, such as metal production, power sources, and glass industry, aware of progress in various specialties, as well as to familiarize new research workers with the fundamental aspects of the broad field of molten salt _ chemistry. This volume constitutes the plenary lectures presented at the NATO Advanced Study Institute on Molten Salt Chemistry, Camerino, Italy, August 3-15, 1986. The fundamentals and several selected applications of molten salt chemistry were addressed. The major fundamental topics covered at this ASI were the structure of melts, thermodynamics of molten salt mixtures, theoretical and experimental studies of transport processes, metal-metal salt solutions, solvent properties of melt systems, acid-base effects in molten salt chemistry, electronic absorption, vibrational, and nuclear magnetic resonance spectroscopy of melt systems, electrochemistry and electroanalytical chemistry in molten salts, and organic chemistry in molten salts. The applied aspects of molten salt chemistry included the chemistry of aluminum production, electrodeposition using molten salts, and molten salt batteries and fuel cells.
Download or read book An Introduction to Surface Analysis by XPS and AES written by John F. Watts and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a concise yet comprehensive introduction to XPS and AES techniques in surface analysis This accessible second edition of the bestselling book, An Introduction to Surface Analysis by XPS and AES, 2nd Edition explores the basic principles and applications of X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) techniques. It starts with an examination of the basic concepts of electron spectroscopy and electron spectrometer design, followed by a qualitative and quantitative interpretation of the electron spectrum. Chapters examine recent innovations in instrument design and key applications in metallurgy, biomaterials, and electronics. Practical and concise, it includes compositional depth profiling; multi-technique analysis; and everything about samples—including their handling, preparation, stability, and more. Topics discussed in more depth include peak fitting, energy loss background analysis, multi-technique analysis, and multi-technique profiling. The book finishes with chapters on applications of electron spectroscopy in materials science and the comparison of XPS and AES with other analytical techniques. Extensively revised and updated with new material on NAPXPS, twin anode monochromators, gas cluster ion sources, valence band spectra, hydrogen detection, and quantification Explores key spectroscopic techniques in surface analysis Provides descriptions of latest instruments and techniques Includes a detailed glossary of key surface analysis terms Features an extensive bibliography of key references and additional reading Uses a non-theoretical style to appeal to industrial surface analysis sectors An Introduction to Surface Analysis by XPS and AES, 2nd Edition is an excellent introductory text for undergraduates, first-year postgraduates, and industrial users of XPS and AES.
Download or read book Halide Perovskites written by Tze-Chien Sum and published by John Wiley & Sons. This book was released on 2019-03-25 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real insight from leading experts in the field into the causes of the unique photovoltaic performance of perovskite solar cells, describing the fundamentals of perovskite materials and device architectures. The authors cover materials research and development, device fabrication and engineering methodologies, as well as current knowledge extending beyond perovskite photovoltaics, such as the novel spin physics and multiferroic properties of this family of materials. Aimed at a better and clearer understanding of the latest developments in the hybrid perovskite field, this is a must-have for material scientists, chemists, physicists and engineers entering or already working in this booming field.
Download or read book Process Technology for Silicon Carbide Devices written by Carl-Mikael Zetterling and published by IET. This book was released on 2002 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains why SiC is so useful in electronics, gives clear guidance on the various processing steps (growth, doping, etching, contact formation, dielectrics etc) and describes how these are integrated in device manufacture.
Download or read book Modern Techniques of Surface Science written by D. P. Woodruff and published by Cambridge University Press. This book was released on 1994-03-03 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and expanded second edition of the standard work on new techniques for studying solid surfaces.
Download or read book Solid State Spectroscopy written by Hans Kuzmany and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introductory compilation of basic concepts, methods and applications in the field of spectroscopy. It discusses new radiation sources such as lasers and synchrotrons and describes the linear response together with the basic principles and the technical background for various scattering experiments.
