Download or read book Advances in Solid State Lasers written by Mikhail Grishin and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Invention of the solid-state laser has initiated the beginning of the laser era. Performance of solid-state lasers improved amazingly during five decades. Nowadays, solid-state lasers remain one of the most rapidly developing branches of laser science and become an increasingly important tool for modern technology. This book represents a selection of chapters exhibiting various investigation directions in the field of solid-state lasers and the cutting edge of related applications. The materials are contributed by leading researchers and each chapter represents a comprehensive study reflecting advances in modern laser physics. Considered topics are intended to meet the needs of both specialists in laser system design and those who use laser techniques in fundamental science and applied research. This book is the result of efforts of experts from different countries. I would like to acknowledge the authors for their contribution to the book. I also wish to acknowledge Vedran Kordic for indispensable technical assistance in the book preparation and publishing.

Download or read book Solid State Laser Engineering written by Walter Koechner and published by Springer. This book was released on 2013-11-11 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has once again been updated to keep pace with recent developments and to maintain Koechner's position as "the bible" of the field. Written from an industrial perspective, it provides a detailed discussion of, and data for, solid-state lasers, their characteristics, design and construction.

Download or read book Solid state Lasers written by Thomas O. Hardwell and published by Nova Publishers. This book was released on 2008 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: A solid-state laser use and gain medium that is a solid, rather than a liquid such as dye lasers or a gas such as gas lasers. Semiconductor-based lasers are also in the solid state, but are generally considered separately from solid-state lasers. Generally, the active medium of a solid-state laser consists of a glass or crystalline host material to which is added a dopant such as neodymium, chromium, erbium, or other ions. Many of the common dopants are rare earth elements, because the excited states of such ions are not strongly coupled with thermal vibrations of the crystalline lattice (phonons), and the lasing threshold can be reached at relatively low brightness of pump. There are many hundreds of solid-state media in which laser action has been achieved, but relatively few types are in widespread use. Of these, probably the most common type is neodymium doped YAG. Neodymium-doped glass (Nd:glass) and Ytterbium-doped glasses and ceramics are used in solid-state lasers at extremely high power (terawatt scale), high energy (megajoules) multiple beam systems for inertial confinement fusion. Titanium doped sapphire is also widely used for its broad tunability. This book gathers new research in the field.

Download or read book Packaging of High Power Semiconductor Lasers written by Xingsheng Liu and published by Springer. This book was released on 2014-07-14 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces high power semiconductor laser packaging design. The challenges of the design and various packaging and testing techniques are detailed by the authors. New technologies and current applications are described in detail.

Download or read book Solid State Laser Engineering written by Walter Koechner and published by Springer. This book was released on 2007-11-06 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written from an industrial perspective this book discusses in detail the characteristics, design, construction, and performance of solid-state lasers. Emphasis is placed on engineering and practical considerations; phenomenological aspects using models are preferred to abstract mathematical derivations. Since its first edition almost 30 years ago this book has become the standard in the field of solid-state lasers for scientists, engineers and graduate students. This edition has been extensively revised and updated to account for recent developments in the areas of diode-laser pumping, laser materials and nonlinear crystals, and entire new sections have been added.

Download or read book Organic Solid State Lasers written by Sébastien Forget and published by Springer. This book was released on 2013-07-03 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic lasers are broadly tunable coherent sources, potentially compact, convenient and manufactured at low-costs. Appeared in the mid 60’s as solid-state alternatives for liquid dye lasers, they recently gained a new dimension after the demonstration of organic semiconductor lasers in the 90's. More recently, new perspectives appeared at the nanoscale, with organic polariton and surface plasmon lasers. After a brief reminder to laser physics, a first chapter exposes what makes organic solid-state organic lasers specific. The laser architectures used in organic lasers are then reviewed, with a state-of-the-art review of the performances of devices with regard to output power, threshold, lifetime, beam quality etc. A survey of the recent trends in the field is given, highlighting the latest developments with a special focus on the challenges remaining for achieving direct electrical pumping of organic semiconductor lasers. A last chapter covers the applications of organic solid-state lasers.

Download or read book High Power Laser Handbook written by Hagop Injeyan and published by McGraw Hill Professional. This book was released on 2011-01-05 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The State of the Art in High-Power Laser Technology Filled with full-color images, High-Power Laser Handbook offers comprehensive details on the latest advances in high-power laser development and applications. Performance parameters for each major class of lasers are described. The book covers high-power gas, chemical, and free-electron lasers and then discusses semiconductor diode lasers, along with the associated technologies of packaging, reliability, and beam shaping and delivery. Current research and development in solid-state lasers is described as well as scaling approaches for high CW powers, high pulse energies, and high peak powers. This authoritative work also addresses the emergence of fiber lasers and concludes by reviewing various methods for beam combining. Coverage Includes: Carbon dioxide lasers Excimer lasers Chemical lasers High-power free-electron lasers Semiconductor laser diodes High-power diode laser arrays Introduction to high-power solid-state lasers Zig-zag slab lasers ThinZag high-power laser development Thin disk lasers Heat capacity lasers Ultrafast solid-state lasers Ultrafast lasers in the thin disk geometry The National Ignition Facility laser Optical fiber lasers Pulsed fiber lasers High-power ultrafast fiber laser systems High-power fiber lasers for industry and defense Beam combining

Download or read book Handbook of Solid State Lasers written by B Denker and published by Elsevier. This book was released on 2013-02-20 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-state lasers which offer multiple desirable qualities, including enhanced reliability, robustness, efficiency and wavelength diversity, are absolutely indispensable for many applications. The Handbook of solid-state lasers reviews the key materials, processes and applications of solid-state lasers across a wide range of fields.Part one begins by reviewing solid-state laser materials. Fluoride laser crystals, oxide laser ceramics, crystals and fluoride laser ceramics doped by rare earth and transition metal ions are discussed alongside neodymium, erbium and ytterbium laser glasses, and nonlinear crystals for solid-state lasers. Part two then goes on to explore solid-state laser systems and their applications, beginning with a discussion of the principles, powering and operation regimes for solid-state lasers. The use of neodymium-doped materials is considered, followed by system sizing issues with diode-pumped quasi-three level materials, erbium glass lasers, and microchip, fiber, Raman and cryogenic lasers. Laser mid-infrared systems, laser induced breakdown spectroscope and the clinical applications of surgical solid-state lasers are also explored. The use of solid-state lasers in defense programs is then reviewed, before the book concludes by presenting some environmental applications of solid-state lasers.With its distinguished editors and international team of expert contributors, the Handbook of solid-state lasers is an authoritative guide for all those involved in the design and application of this technology, including laser and materials scientists and engineers, medical and military professionals, environmental researchers, and academics working in this field. - Reviews the materials used in solid-state lasers - Explores the principles of solid-state laser systems and their applications - Considers defence and environmental applications

Download or read book Solid State Lasers written by Massimo Inguscio and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the lectures and seminars presented at the NATO Ad vanced Study Institute on "Solid State Lasers: New Developments and Appli cations" the fifteenth course of the Europhysics School of Quantum Electronics, held under the supervision of the Quantum Electronics Division of the European Physical Society. The Institute was held at Elba International Physics Center, Marciana Marina, Elba Island, Tuscany, Italy, August 31 -September 11, 1992. The Europhysics School of Quantum Electronics was started in 1970 with the aim of providing instruction for young researchers and advanced students al ready engaged in the area of quantum electronics or wishing to switch to this area from a different background. Presently the school is under the direction of Professors F.T. Arecchi and M. Inguscio, University of Florence, and Prof. H. Walther, University of Munich, and has its headquarters at the National Insti tute of Optics (INO), Florence, Italy. Each time the directors choose a subject of particular interest, alternating fundamental topics with technological ones, and ask colleagues specifically competent in a given area to take the scientific responsibility for that course.

Download or read book High Power and Solid State Lasers Two written by and published by . This book was released on 1989 with total page 2201 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Power Diode Lasers written by Roland Diehl and published by Springer Science & Business Media. This book was released on 2003-07-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from the basics of semiconductor lasers with emphasis on the generation of high optical output power the reader is introduced in a tutorial way to all key technologies required to fabricate high-power diode-laser sources. Various applications are exemplified.

Download or read book The Potential of High average power Solid State Lasers written by J. L. Emmett and published by . This book was released on 1984 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: We discuss the possibility of extending solid state laser technology to high average power and of improving the efficiency of such lasers sufficiently to make them reasonable candidates for a number of demanding applications. A variety of new design concepts, materials, and techniques have emerged over the past decade that, collectively, suggest that the traditional technical limitations on power (a few hundred watts or less) and efficiency (less than 1%) can be removed. The core idea is configuring the laser medium in relatively thin, large-area plates, rather than using the traditional low-aspect-ratio rods or blocks. This presents a large surface area for cooling, and assures that deposited heat is relatively close to a cooled surface. It also minimizes the laser volume distorted by edge effects. The feasibility of such configurations is supported by recent developments in materials, fabrication processes, and optical pumps. Two types of lasers can, in principle, utilize this sheet-like gain configuration in such a way that phase and gain profiles are uniformly sampled and, to first order, yield high-quality (undistorted) beams. The zig-zag laser does this with a single plate, and should be capable of power levels up to several kilowatts. The disk laser is designed around a large number of plates, and should be capable of scaling to arbitrarily high power levels.

Download or read book Solid State Lasers written by Walter Koechner and published by Springer Science & Business Media. This book was released on 2006-05-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Koechner's well-known ‘bible’ on solid-state laser engineering is now available in an accessible format at the graduate level. Numerous exercises with hints for solution, new text and updated material where needed make this text very accessible.

Download or read book Handbook of Solid State Lasers written by Peter Cheo and published by CRC Press. This book was released on 1988-11-29 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information on both state-of-the-art technology and fundamental principles of fully developed solid-state lasers, emphasizing their operational characteristics and physical properties. Six contributions discuss theories and techniques of III-V semiconductor diode lasers, describe various ty

Download or read book Advances in High Power Fiber and Diode Laser Engineering written by Ivan Divliansky and published by Institution of Engineering and Technology. This book was released on 2019-12-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in High-Power Fiber and Diode Laser Engineering provides an overview of recent research trends in fiber and diode lasers and laser systems engineering. In recent years, many new fiber designs and fiber laser system strategies have emerged, targeting the mitigation of different problems which occur when standard optical fibers are used for making high-power lasers. Simultaneously, a lot of attention has been put to increasing the brightness and the output power of laser diodes. Both of these major laser development directions continue to advance at a rapid pace with the sole purpose of achieving higher power while having excellent beam quality. The book begins by introducing the principles of diode lasers and methods for improving their brightness. Later chapters cover quantum cascade lasers, diode pumped high power lasers, high average power LMA fiber amplifiers, high-power fiber lasers, beam combinable kilowatt all-fiber amplifiers, and applications of 2 μm thulium fiber lasers and high-power GHz linewidth diode lasers. Written by a team of authors with experience in academia and industrial research and development, and brought together by an expert editor, this book will be of use to anyone interested in laser systems development at the laboratory or commercial scale.

Download or read book Lasers for Medical Applications written by Helena Jelínková and published by Elsevier. This book was released on 2013-09-30 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers have a wide and growing range of applications in medicine. Lasers for Medical Applications summarises the wealth of recent research on the principles, technologies and application of lasers in diagnostics, therapy and surgery.Part one gives an overview of the use of lasers in medicine, key principles of lasers and radiation interactions with tissue. To understand the wide diversity and therefore the large possible choice of these devices for a specific diagnosis or treatment, the respective types of the laser (solid state, gas, dye, and semiconductor) are reviewed in part two. Part three describes diagnostic laser methods, for example optical coherence tomography, spectroscopy, optical biopsy, and time-resolved fluorescence polarization spectroscopy. Those methods help doctors to refine the scope of involvement of the particular body part or, for example, to specify the extent of a tumor. Part four concentrates on the therapeutic applications of laser radiation in particular branches of medicine, including ophthalmology, dermatology, cardiology, urology, gynecology, otorhinolaryngology (ORL), neurology, dentistry, orthopaedic surgery and cancer therapy, as well as laser coatings of implants. The final chapter includes the safety precautions with which the staff working with laser instruments must be familiar.With its distinguished editor and international team of contributors, this important book summarizes international achievements in the field of laser applications in medicine in the past 50 years. It provides a valuable contribution to laser medicine by outstanding experts in medicine and engineering. - Describes the interaction of laser light with tissue - Reviews every type of laser used in medicine: solid state, gas, dye and semiconductor - Describes the use of lasers for diagnostics

Download or read book The Potential of High average power Solid State Lasers written by J. L. Emmett and published by . This book was released on 1984 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: We discuss the possibility of extending solid state laser technology to high average power and of improving the efficiency of such lasers sufficiently to make them reasonable candidates for a number of demanding applications. A variety of new design concepts, materials, and techniques have emerged over the past decade that, collectively, suggest that the traditional technical limitations on power (a few hundred watts or less) and efficiency (less than 1%) can be removed. The core idea is configuring the laser medium in relatively thin, large-area plates, rather than using the traditional low-aspect-ratio rods or blocks. This presents a large surface area for cooling, and assures that deposited heat is relatively close to a cooled surface. It also minimizes the laser volume distorted by edge effects. The feasibility of such configurations is supported by recent developments in materials, fabrication processes, and optical pumps. Two types of lasers can, in principle, utilize this sheet-like gain configuration in such a way that phase and gain profiles are uniformly sampled and, to first order, yield high-quality (undistorted) beams. The zig-zag laser does this with a single plate, and should be capable of power levels up to several kilowatts. The disk laser is designed around a large number of plates, and should be capable of scaling to arbitrarily high power levels.