Download or read book High Performance ZnO Thin Film Transistors on Both Glass and Plastic Substrates written by 劉建承 and published by . This book was released on 2009 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book State of the Art Program on Compound Semiconductorss 47 SOTAPOCS 47 and Wide Bandgap Semiconductor Materials and Devices 8 written by J. Wang and published by The Electrochemical Society. This book was released on 2007 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains the proceedings of both invited and contributed talks at the 47th State-Of-The-Art Programs on Compound Semiconductors (SOTAPOCS) symposium, and of the 8th Symposium on Wide Bandgap Semiconductors and Devices. The topics in this issue include some of the latest progress in compound and wide bandgap semiconductor development in fabrication processes, materials, characterization, devices, and reliability.
Download or read book Zno Thin Film Electronics For More Than Displays written by Jose Ramirez and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc oxide thin film transistors (TFTs) are investigated in this work for large-area electronic applications outside of display technology. A constant pressure, constant flow, showerhead, plasma-enhanced atomic layer deposition (PEALD) process has been developed to fabricate high mobility TFTs and circuits on rigid and flexible substrates at 200 °C. ZnO films and resulting devices prepared by PEALD and pulsed laser deposition (PLD) have been compared. Both PEALD and PLD ZnO films result in densely packed, polycrystalline ZnO thin films that were used to make high performance devices. PEALD ZnO TFTs deposited at 300 °C have a field-effect mobility of ~ 40 cm2/V-s (and > 20 cm2/V-S deposited at 200 °C). PLD ZnO TFTs, annealed at 400 °C, have a field-effect mobility of > 60 cm2/V-s (and up to 100 cm2/V-s). Devices, prepared by either technique, show high gamma-ray radiation tolerance of up to 100 Mrad(SiO2) with only a small radiation-induced threshold voltage shift (VT ~ -1.5 V). Electrical biasing during irradiation showed no enhanced radiation-induced effects. The study of the radiation effects as a function of material stack thicknesses revealed the majority of the radiation-induced charge collection happens at the semiconductor-passivation interface. A simple sheet-charge model at that interface can describe the radiation-induced charge in ZnO TFTs. By taking advantage of the substrate-agnostic process provided by PEALD, due to its low-temperature and excellent conformal coatings, ZnO electronics were monolithically integrated with thin-film complex oxides. Application-based examples where ZnO electronics provide added functionality to complex oxide-based devices are presented. In particular, the integration of arrayed lead zirconate titanate (Pb(Zr, Ti)O3 or PZT) thin films with ZnO electronics for microelectromechanical systems (MEMs) and deformable mirrors is demonstrated. ZnO switches can provide voltage to PZT capacitors with fast charging and slow discharging time constants. Finally, to circumvent fabrication challenges on predetermined complex shapes, like curved mirror optics, a technique to transfer electronics from a rigid substrate to a flexible substrate is used. This technique allows various thin films, regardless of their deposition temperature, to be transferred to flexible substrates. Finally, ultra-low power operation of ZnO TFT gas sensors was demonstrated. The ZnO ozone sensors were optimized to operate with excellent electrical stability in ambient conditions, without using elevated temperatures, while still providing good gas sensitivity. This was achieved by using a post-deposition anneal and by partially passivating the contact regions while leaving the semiconductor sensing area open to the ambient. A novel technique to reset the gas sensor using periodic pulsing of a UV light over the sensor results in less than 25 milliseconds recovery time. A pathway to achieve gas selectivity by using organic thin-film layers as filters deposited over the gas sensors tis demonstrated. The ZnO ozone sensor TFTs and the UV light operate at room temperature with an average power below 1 [mu]W.
Download or read book ZnO Thin Film Transistors for Cost Efficient Flexible Electronics written by Fábio Fedrizzi Vidor and published by Springer. This book was released on 2017-12-28 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the integration, characterization and analysis of cost-efficient thin-film transistors (TFTs), applying zinc oxide as active semiconductors. The authors discuss soluble gate dielectrics, ZnO precursors, and dispersions containing nanostructures of the material, while different transistor configurations are analyzed with respect to their integration, compatibility, and device performance. Additionally, simple circuits (inverters and ring oscillators) and a complementary design employing (in)organic semiconducting materials are presented and discussed. Readers will benefit from concise information on cost-efficient materials and processes, applied in flexible and transparent electronic technology, such as the use of solution-based materials and dispersion containing nanostructures, as well as discussion of the physical fundamentals responsible for the operation of the thin-film transistors and the non-idealities of the device.
Download or read book Transparent Electronics written by Elvira Fortunato and published by . This book was released on with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Investigation of the Performance and Stability of Zinc Oxide Thin film Transistors and the Role of High k Dielectrics written by Ngwashi Divine Khan and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent oxide semiconducting films have continued to receive considerable attention, from a fundamental and application-based point of view, primarily because of their useful fundamental properties. Of particular interest is zinc oxide (ZnO), an n-type semiconductor that exhibits excellent optical, electrical, catalytic and gas-sensing properties, and has many applications in various fields. In this work, thin film transistor (TFT) arrays based on ZnO have been prepared by reactive radio frequency (RF) magnetron sputtering. Prior to the TFT fabrication, ZnO layers were sputtered on to glass and silicon substrates, and the deposition parameters optimised for electrical resistivities suitable for TFT applications. The sputtering process was carried out at room temperature with no intentional heating. The aim of this work is to prepare ZnO thin films with stable semiconducting electrical properties to be used as the active channel in TFTs; and to understand the role of intrinsic point defects in device performance and stability. The effect of oxygen (O2) adsorption on TFT device characteristics is also investigated. The structural quality of the material (defect type and concentration), electrical and optical properties (transmission/absorption) of semiconductor materials are usually closely correlated. Using the Vienna ab-initio simulation package (VASP), it is predicted that O2 adsorption may influence film transport properties only within a few atomic layers beneath the adsorption site. These findings were exploited to deposit thin films that are relatively stable in atmospheric ambient with improved TFT applications. TFTs incorporating the optimised layer were fabricated and demonstrated very impressive performance metrics, with effective channel mobilities as high as 30 cm2/V-1s-1, on-off current ratios of 107 and sub-threshold slopes of 0.9? 3.2 V/dec. These were found to be dependent on film thickness (~15? 60 nm) and the underlying dielectric (silicon dioxide (SiO2), gadolinium oxide (Gd2O3), yttrium oxide (Y2O3) and hafnium oxide (HfO2)). In this work, prior to sputtering the ZnO layer (using a ZnO target of 99.999 % purity), the sputtering chamber was evacuated to a base pressure ~4 x 10-6 Torr. Oxygen (O2) and argon (Ar) gas (with O2/Ar ratio of varying proportions) were then pumped into the chamber and the deposition process optimised by varying the RF power between 25 and 500 W and the O2/Ar ratio between 0.010 to 0.375. A two-level factorial design technique was implemented to test specific parameter combinations (i.e. RF power and O2/Ar ratio) and then statistical analysis was utilised to map out the responses. The ZnO films were sputtered on glass and silicon substrates for transparency and resistivity measurements, and TFT fabrication respectively. For TFT device fabrication, ZnO films were deposited onto thermally-grown silicon dioxide (SiO2) or a high-k dielectric layer (HfO2, Gd2O3 and Y2O3) deposited by a metal-organic chemical deposition (MOCVD) process. Also, by using ab initio simulation as implemented in the?Vienna ab initio simulation package (VASP)?, the role of oxygen adsorption on the electrical stability of ZnO thin film is also investigated. The results indicate that O2 adsorption on ZnO layers could modify both the electronic density of states in the vicinity of the Fermi level and the band gap of the film. This study is complemented by studying the effects of low temperature annealing in air on the properties of ZnO films. It is speculated that O2 adsorption/desorption at low temperatures (150? 350 0C) induces variations in the electrical resistance, band gap and Urbach energy of the film, consistent with the trends predicted from DFT results.
Download or read book Fabrication and Characterization of Oxide based Thin Film Transistors and Process Development for Oxide Heterostructures written by Wantae Lim and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT: This dissertation is focused on the development of thin film transistors (TFTs) using oxide materials composed of post-transitional cations with (n-1)d10ns0 (n[more than or equal to]4). The goal is to achieve high performance oxide-based TFTs fabricated at low processing temperature on either glass or flexible substrates for next generation display applications. In addition, etching mechanism and Ohmic contact formation for oxide heterostructure (ZnO/CuCrO2) system is demonstrated. The deposition and characterization of oxide semiconductors (In2O3-Zn0, and InGaZnO4) using a RF-magnetron sputtering system are studied. The main influence on the resistivity of the films is found to be the oxygen partial pressure in the sputtering ambient. The films remained amorphous and transparent (> 70%) at all process conditions. These films showed good transmittance at suitable conductivity for transistor fabrication. The electrical characteristics of both top- and bottom-gate type Indium Zinc Oxide (InZnO) and Indium Gallium Zinc Oxide (InGaZnO4)-based TFTs are reported. The InZnO films were favorable for depletion-mode TFTs due to their tendency to form oxygen vacancies, while enhancement-mode devices were realized with InGaZnO4 films. The InGaZnO4-based TFTs fabricated on either glass or plastic substrates at low temperature (
Download or read book High Performance and High Stability Zno Thin Film Transistors written by 吳孟倫 and published by . This book was released on 2008 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxide Thin Film Transistors written by K. J. Saji and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent flexible electronics is an emerging technology which makes use of wide band gap semiconductors that can be processed at low temperatures on glass or plastic substrates. Electronic systems that cover large area and curved surfaces together with transparency bring the possibility of numerous applications that are outside the scope of rigid wafer based electronics. Flexible electronics, electronic textiles, a wearable wellness system, and sensory skin are some of the applications of flexible electronics. The key factor in the realization of transparent electronics is the development of high performance fully transparent thin film transistors. Thin film transistors (TFTs) based on transparent conducting amorphous oxide semiconductors (TAOS) such as InGaZnO (IGZO), zinc tin oxide (ZTO), zinc indium tin oxide (ZITO), etc. provide additional functionalities like transparency, high field effect mobility and potential for room temperature processing. The performance of these TAOS based TFTs are superior to their silicon (a-Si:H TFTs) and organic TFTs. Though there are monographs and books on a-Si:H TFTs and organic TFTs, a book on TAOS based TFTs is rare. This book introduces the graduate students and beginners to the field of amorphous semiconductors. The mass production of this kind of TFTs on large area substrates involves the complications associated with controlling the composition of oxide compound semiconductor thin film material. Pulsed laser deposition allows for the growth of an oxide semiconductor in a very high oxygen rich environment while co-sputtering is an effective technique for the growth of a multicomponent film and to control the film chemical composition in a systematic and easy way. These manufacturing aspects will be of interest to those working in the industry. The review on the n channel, p channel TFTs, and the detailed description on the extraction of various TFT parameters like the threshold voltage, field effect mobility, sub threshold slope and on-off ratio etc. will be ready reckoner to those working in the field of transparent electronics.
Download or read book Thin Film Electronics with Novel Materials written by Yiyang Gong and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel materials, including zinc oxide (ZnO) and 2D transition metal dichalcogenides (TMDs), have been investigated in this dissertation for the realization of high-performance large-area integrated circuits. These novel materials may provide differential advantages over the established large-area thin film technology based on silicon, which has been extensively employed in applications such as large-area flat panel displays, high-speed active matrix thin film circuits, flexible and wearable electronics, etc. The dissertation begins with the discussion of high-performance plasma-enhanced atomic layer deposition (PEALD) of ZnO thin films and ZnO thin film transistors (TFTs) with a field effect mobility of ~ 10 to 20 cm2/Vs, which have been demonstrated. Offset-drain ZnO TFTs, which are able to withstand or switch voltage beyond 80 V, have also been demonstrated. These results shed light on the realization of large-area active-matrix circuits beyond the capabilities of the current display industry where high circuit speed or high operation voltage is required. To further improve the performance of ZnO-based electronics, many related materials, including doped ZnO, zinc nitride, and aluminum nitride, have been investigated. Doped ZnO has been proposed as the carrier injection layer that can improve the conductivity of metal-semiconductor contact in ZnO TFTs. Aluminum-doped ZnO thin films have been deposited using triisobutyl aluminum (TIBA) as the dopant precursor instead of trimethyl aluminum (TMA) in order to improve the uniformity of dopant distribution because TIBA has much lower vapor pressure than TMA. AZO thin films with resistivity ~ 10-2 cm have been achieved by PEALD. Besides, aluminum nitride and zinc nitride thin films have also been studied using PEALD. In addition to the showerhead PEALD system, a novel inductively coupled plasma ALD system has been designed and set up that provides RF power up to 500 W in order to generate a highly reactive nitrogen plasma source and enable the deposition of high-quality metal nitride at relatively low temperature. These metal nitride thin films may provide additional building blocks to enhance the speed and thermal stability of ZnO-based thin film devices and circuits.Owing to their excellent electrical and mechanical properties, 2D-TMD thin films have been studied for flexible electronics applications. High quality MoS2 and WS2 thin films have been achieved via mechanical exfoliation and chemical vapor deposition. To fabricate MoS2- and WS2-based TFTs, a 5-step device fabrication process has been developed, which is compatible to both the conventional rigid substrate and the ~ 4.8 nm thick solution-cast polyimide (PI) flexible substrate. The MoS2 and WS2 TFTs fabricated on PI substrate exhibit a field effect mobility of between 1 to 20 cm2/Vs, which is similar to that of those fabricated on rigid silicon substrate. More importantly, extraordinary mechanical strength and stability have been demonstrated for MoS2 and WS2 TFTs fabricated on PI substrate. A reasonably small degradation in device performance has been observed in these flexible 2D-TMD TFTs under static bending to the radius of ~ 2mm and after cyclic bending up to 100,000 cycles. Finally, attempts to create integratable 2D-TMD circuits have been demonstrated. To realize large-area 2D-TMD based circuits, growth of wafer-scale continuous WSe2 thin films has been demonstrated using metal organic chemical vapor deposition (MOCVD). Deposition has been achieved at as low as 400 C, which allows deposition on glass and polymeric substrate and enables the transfer-free fabrication of WSe2 TFTs and circuits on arbitrary platforms. Patterning and post-growth thickness modulation of continuous WSe2 thin film have been demonstrated using CF4 plasma and O2 plasma, whereby high-speed etching and nanometer-scale film thinning can be realized. With the capability of depositing and patterning wafer-scale WSe2 thin films, an array of p-channel WSe2 TFTs have been fabricated with a field effect mobility of ~0.01 cm2/Vs and an on-off ratio greater than 104.
Download or read book Comprehensive Nanoscience and Technology written by and published by Academic Press. This book was released on 2010-10-29 with total page 2785 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Introduction: Nanotechnology and its underpinning sciences are progressing with unprecedented rapidity. With technical advances in a variety of nanoscale fabrication and manipulation technologies, the whole topical area is maturing into a vibrant field that is generating new scientific research and a burgeoning range of commercial applications, with an annual market already at the trillion dollar threshold. The means of fabricating and controlling matter on the nanoscale afford striking and unprecedented opportunities to exploit a variety of exotic phenomena such as quantum, nanophotonic and nanoelectromechanical effects. Moreover, researchers are elucidating new perspectives on the electronic and optical properties of matter because of the way that nanoscale materials bridge the disparate theories describing molecules and bulk matter. Surface phenomena also gain a greatly increased significance; even the well-known link between chemical reactivity and surface-to-volume ratio becomes a major determinant of physical properties, when it operates over nanoscale dimensions. Against this background, this comprehensive work is designed to address the need for a dynamic, authoritative and readily accessible source of information, capturing the full breadth of the subject. Its six volumes, covering a broad spectrum of disciplines including material sciences, chemistry, physics and life sciences, have been written and edited by an outstanding team of international experts. Addressing an extensive, cross-disciplinary audience, each chapter aims to cover key developments in a scholarly, readable and critical style, providing an indispensible first point of entry to the literature for scientists and technologists from interdisciplinary fields. The work focuses on the major classes of nanomaterials in terms of their synthesis, structure and applications, reviewing nanomaterials and their respective technologies in well-structured and comprehensive articles with extensive cross-references. It has been a constant surprise and delight to have found, amongst the rapidly escalating number who work in nanoscience and technology, so many highly esteemed authors willing to contribute. Sharing our anticipation of a major addition to the literature, they have also captured the excitement of the field itself in each carefully crafted chapter. Along with our painstaking and meticulous volume editors, full credit for the success of this enterprise must go to these individuals, together with our thanks for (largely) adhering to the given deadlines. Lastly, we record our sincere thanks and appreciation for the skills and professionalism of the numerous Elsevier staff who have been involved in this project, notably Fiona Geraghty, Megan Palmer and Greg Harris, and especially Donna De Weerd-Wilson who has steered it through from its inception. We have greatly enjoyed working with them all, as we have with each other.
Download or read book OLED Fundamentals written by Daniel J. Gaspar and published by CRC Press. This book was released on 2015-05-15 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive Source for Taking on the Next Stage of OLED R&DOLED Fundamentals: Materials, Devices, and Processing of Organic Light-Emitting Diodes brings together key topics across the field of organic light-emitting diodes (OLEDs), from fundamental chemistry and physics to practical materials science and engineering aspects to design and ma
Download or read book Introduction to Thin Film Transistors written by S.D. Brotherton and published by Springer Science & Business Media. This book was released on 2013-04-16 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thin Film Transistors reviews the operation, application and technology of the main classes of thin film transistor (TFT) of current interest for large area electronics. The TFT materials covered include hydrogenated amorphous silicon (a-Si:H), poly-crystalline silicon (poly-Si), transparent amorphous oxide semiconductors (AOS), and organic semiconductors. The large scale manufacturing of a-Si:H TFTs forms the basis of the active matrix flat panel display industry. Poly-Si TFTs facilitate the integration of electronic circuits into portable active matrix liquid crystal displays, and are increasingly used in active matrix organic light emitting diode (AMOLED) displays for smart phones. The recently developed AOS TFTs are seen as an alternative option to poly-Si and a-Si:H for AMOLED TV and large AMLCD TV applications, respectively. The organic TFTs are regarded as a cost effective route into flexible electronics. As well as treating the highly divergent preparation and properties of these materials, the physics of the devices fabricated from them is also covered, with emphasis on performance features such as carrier mobility limitations, leakage currents and instability mechanisms. The thin film transistors implemented with these materials are the conventional, insulated gate field effect transistors, and a further chapter describes a new thin film transistor structure: the source gated transistor, SGT. The driving force behind much of the development of TFTs has been their application to AMLCDs, and there is a chapter dealing with the operation of these displays, as well as of AMOLED and electrophoretic displays. A discussion of TFT and pixel layout issues is also included. For students and new-comers to the field, introductory chapters deal with basic semiconductor surface physics, and with classical MOSFET operation. These topics are handled analytically, so that the underlying device physics is clearly revealed. These treatments are then used as a reference point, from which the impact of additional band-gap states on TFT behaviour can be readily appreciated. This reference book, covering all the major TFT technologies, will be of interest to a wide range of scientists and engineers in the large area electronics industry. It will also be a broad introduction for research students and other scientists entering the field, as well as providing an accessible and comprehensive overview for undergraduate and postgraduate teaching programmes.
Download or read book Circuit Design on Plastic Foils written by Daniele Raiteri and published by Springer. This book was released on 2014-12-03 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates a variety of circuit designs on plastic foils and provides all the information needed to undertake successful designs in large-area electronics. The authors demonstrate architectural, circuit, layout, and device solutions and explain the reasons and the creative process behind each. Readers will learn how to keep under control large-area technologies and achieve robust, reliable circuit designs that can face the challenges imposed by low-cost low-temperature high-throughput manufacturing.
Download or read book Oxide Semiconductors Volume 1633 written by Steve Durbin and published by Materials Research Society. This book was released on 2014-07-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium R, "Oxide Semiconductors" was held December 1-6 at the 2013 MRS Fall Meeting in Boston, Massachusetts. Oxide semiconductors are poised to take a more active role in modern electronics, particularly in the field of thin film transistors. While many advances have been made in terms of our understanding of fundamental optical and electronic characteristics, there remain many questions in terms of defects, doping, and optimal growth/synthesis conditions. This symposium proceedings volume represents recent advances in growth and characterization of a number of different oxide semiconductors, as well as device fabrication.
Download or read book Transparent Electronics written by Antonio Facchetti and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenge for producing “invisible” electronic circuitry and opto-electronic devices is that the transistor materials must be transparent to visible light yet have good carrier mobilities. This requires a special class of materials having “contra-indicated properties” because from the band structure point of view, the combination of transparency and conductivity is contradictory. Structured to strike a balance between introductory and advanced topics, this monograph juxtaposes fundamental science and technology / application issues, and essential materials characteristics versus device architecture and practical applications. The first section is devoted to fundamental materials compositions and their properties, including transparent conducting oxides, transparent oxide semiconductors, p-type wide-band-gap semiconductors, and single-wall carbon nanotubes. The second section deals with transparent electronic devices including thin-film transistors, photovoltaic cells, integrated electronic circuits, displays, sensors, solar cells, and electro-optic devices. Describing scientific fundamentals and recent breakthroughs such as the first “invisible” transistor, Transparent Electronics: From Synthesis to Applications brings together world renowned experts from both academia, national laboratories, and industry.
