Download or read book High performance Construction Materials Science And Applications written by Caijun Shi and published by World Scientific. This book was released on 2008-06-11 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a number of high-performance construction materials, including concrete, steel, fiber-reinforced cement, fiber-reinforced plastics, polymeric materials, geosynthetics, masonry materials and coatings. It discusses the scientific bases for the manufacture and use of these high-performance materials. Testing and application examples are also included, in particular the application of relatively new high-performance construction materials to design practice.Most books dealing with construction materials typically address traditional materials only rather than high-performance materials and, as a consequence, do not satisfy the increasing demands of today's society. On the other hand, books dealing with materials science are not engineering-oriented, with limited coverage of the application to engineering practice. This book is thus unique in reflecting the great advances made on high-performance construction materials in recent years.This book is appropriate for use as a textbook for courses in engineering materials, structural materials and civil engineering materials at the senior undergraduate and graduate levels. It is also suitable for use by practice engineers, including construction, materials, mechanical and civil engineers.
Download or read book High Performance Structural Materials written by Yafang Han and published by Springer. This book was released on 2018-04-17 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume gathers selected papers presented at the Chinese Materials Conference 2017 (CMC2017), held in Yinchuan City, Ningxia, China, on July 06-12, 2017. This book covers a wide range of powder metallurgy, high performance aluminum alloys, high performance titanium & titanium alloys, superalloys, metal matrix composite, space materials science and technology, rare metals, refractory metals and their applications, advanced ceramics materials, nanostructured metals and alloys. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and has been held each year since the early 1990s. The 2017 installment included 37 Symposia covering four fields: Advances in energy and environmental materials; High performance structural materials; Fundamental research on materials; and Advanced functional materials. More than 5500 participants attended the congress, and the organizers received more than 700 technical papers. Based on the recommendations of symposium organizers and after peer reviewing, 490 papers have been included in the present proceedings, which showcase the latest original research results in the field of materials, achieved by more than 300 research groups at various universities and research institutes.
Download or read book High Performance Structural Material written by Yafang Han and published by . This book was released on 2015-01-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Chinese Materials Congress 2014 (CMC 2014), July 4-7, 2014, Chengdu, China
Download or read book High Performance Materials in Aerospace written by Harvey M. Flower and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerospace presents an extremely challenging environment for structural materials and the development of new, or improved, materials: processes for material and for component production are the subject of continuous research activity. It is in the nature of high performance materials that the steps of material and of component production should not be considered in isolation from one another. Indeed, in some cases, the very process of material production may also incorporate part or all of the component production itself and, at the very least, will influence the choice of material/component production method to be employed. How ever, the developments currently taking place are to be discovered largely within the confines of specialist conferences or books each dedicated to perhaps a single element of the overall process. In this book contributors, experts drawn from both academia and the aerospace industry, have joined together to combine their individual knowledge to examine high performance aerospace materials in terms of their production, structure, properties and applications. The central interrelationships between the development of structure through the production route and between structure and the properties exhibited in the final component are considered. It is hoped that the book will be of interest to students of aeronautical engineering and of materials science, together with those working within the aerospace industry. Harvey M. Flower Imperial College 1 Design requirements for aerospace structural materials C. J. Peel and P. J. Gregson 1.
Download or read book High Performance Structures and Materials VI written by Willy Patrick Wilde and published by WIT Press. This book was released on 2012 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the edited papers presented at the Sixth International Conference on High Performance Structures and Materials, High Performance Structures and Materials VI addresses the issues involved with advanced types of structures, particularly those based on new concepts or new materials. Contributions will highlight the latest developments in design, optimisation, manufacturing and experimentation in these areas.The use of novel materials and new structural concepts nowadays is not restricted to highly technical areas like aerospace, aeronautical applications or the automotive industry, but affects all engineering fields including those such as civil engineering and architecture. Most high performance structures require the development of a generation of new materials, which can more easily resist a range of external stimuli or react in a non-conventional manner.The book will cover such topics as: Composite materials and structures, Lightweight structures, Nanocomposites, High performance concretes, Concrete fibres, Automotive composites, Steel structures, Natural fibre composites, Timber structures, Material characterisation, Experiments and numerical analysis, Damage and fracture mechanics, Computational intelligence, Adaptable and mobile structures, Environmentally friendly structures.
Download or read book Fatigue and Durability of Structural Materials written by Gary R. Halford and published by ASM International. This book was released on 2006 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. The book covers broad classes of materials used for high-performance structural applications such as aerospace components, automobiles, and power generation systems. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. The concepts are applied to behavior at room or ambient temperatures; a planned second volume will address behavior at higher-temperatures. The volume is a repository of the most significant contributions by the authors to the art and science of material and structural durability over the past half century. During their careers, including 40 years of direct collaboration, they have developed a host of durability models that are based on sound physical and engineering principles. Yet, the models and interpretation of behavior have a unique simplicity that is appreciated by the practicing engineer as well as the beginning student. In addition to their own pioneering work, the authors also present the work of numerous others who have provided useful results that have moved progress in these fields. This book will be of immense value to practicing mechanical and materials engineers and designers charged with producing structural components with adequate durability. The coverage is appropriate for a range of technical levels from undergraduate engineering students through material behavior researchers and model developers. It will be of interest to personnel in the automotive and off-highway vehicle manufacturing industry, the aeronautical industry, space propulsion and the power generation/conversion industry, the electric power industry, the machine tool industry, and any industry associated with the design and manufacturing of mechanical equipment subject to cyclic loads.
Download or read book High Performance Structural Material written by Yafang Han and published by Trans Tech Publications Ltd. This book was released on 2015-04-01 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the Chinese Materials Congress 2014 (CMC 2014), July 4-7, 2014, Chengdu, China. The 145 papers are grouped as follows: Symposium L: Metal Matrix and Ceramic Matrix Composites; Symposium M: High Temperature/Ultra-High Temperature Structural Materials, Surface and Coating Engineering; Symposium N: High Entropy Alloys and Special High Temperature Material; Symposium O: Advanced Magnesium Alloys and Application; Symposium P: Superalloys; Symposium Q: Powder Metallurgy; Symposium R: Steel
Download or read book Manufacturing Technology for Aerospace Structural Materials written by Flake C Campbell Jr and published by Elsevier. This book was released on 2011-08-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA. * All major aerospace structural materials covered: metals and composites* Focus on details of manufacture and use* Author has huge experience in aerospace industry* A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry
Download or read book Special and High Performance Structural Materials written by Yafang Han and published by Trans Tech Publications Ltd. This book was released on 2016-03-20 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015. This is the volume for Part 3 including 131 papers selected from 7 symposia of BB. Amorphous and high entropy alloys; DD. Magnesium Alloys; R. Advanced Metal Matrix Composites; S. High Temperature Structural Materials and Coating; T. High Performance Titanium Alloy; U. Powder Metallurgy; V. Pipeline and Pressure Vessel Materials
Download or read book Development of Ultra High Performance Concrete against Blasts written by Chengqing Wu and published by Woodhead Publishing. This book was released on 2018-03-19 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of Ultra-High Performance Concrete against Blasts: From Materials to Structures presents a detailed overview of UHPC development and its related applications in an era of rising terrorism around the world. Chapters present case studies on the novel development of the new generation of UHPC with nano additives. Field blast test results on reinforced concrete columns made with UHPC and UHPC filled double-skin tubes columns are also presented and compiled, as is the residual load-carrying capacities of blast-damaged structural members and the exceptional performance of novel UHPC materials that illustrate its potential in protective structural design. As a notable representative, ultra-high performance concrete (UHPC) has now been widely investigated by government agencies and universities. UHPC inherits many positive aspects of ultra-high strength concrete (UHSC) and is equipped with improved ductility as a result of fiber addition. These features make it an ideal construction material for bridge decks, storage halls, thin-wall shell structures, and other infrastructure because of its protective properties against seismic, impact and blast loads. Focuses on the principles behind UHPC production, properties, design and detailing aspects Presents a series of case studies and filed blast tests on columns and slabs Focuses on applications and future developments
Download or read book High Performance Structures and Materials V written by W. Patrick De Wilde and published by WIT Press. This book was released on 2010 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Including the latest developments in design, optimisation, manufacturing and experimentation, this text presents a wide range of topics relating to advanced types of structures, particularly those based on new concepts and new types of materials.
Download or read book High Performance and Optimum Design of Structures and Materials written by W. P. De Wilde and published by WIT Press. This book was released on 2014-06-09 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of novel materials and new structural concepts nowadays is not restricted to highly technical areas like aerospace, aeronautical applications or the automotive industry, but affects all engineering fields including those such as civil engineering and architecture. Addressing issues involving advanced types of structures, particularly those based on new concepts or new materials and their system design, contributions highlight the latest developments in design, optimisation, manufacturing and experimentation. Also included are contributions on new software, numerical methods and different optimisation techniques. Optimisation problems of interest involve those related to size, shape and topology of structures and materials. Most high performance structures require the development of a generation of new materials, which can more easily resist a range of external stimuli or react in a non-conventional manner. Particular emphasis is placed on intelligent structures and materials as well as the application of computational methods for their modelling, control and management. Optimisation techniques have much to offer to those involved in the design of new industrial products. The formulation of optimum design has evolved from the time it was purely an academic topic, able now to satisfy the requirements of real life prototypes. The development of new algorithms and the appearance of powerful commercial computer codes, with easy to use graphical interfaces, have created a fertile field for the incorporation of optimisation in the design process in all engineering disciplines. This proceedings volume is the first from a new edition of the High Performance Design of Structures and Materials and the Optimum Design of Structures conferences, which follows the success of a number of meetings that originated in 1989. Topics covered include: Composite materials & structures; Material characterisation; Experiments and numerical analysis; Steel structures; High performance concretes; Natural fibre composites; Transformable structures; Lightweight structures; Timber structures; Environmentally friendly and sustainable structures; Emerging structural applications; Optimisation in civil engineering; Evolutionary methods in optimisation; Shape and topology optimisation; Aerospace structures; Structural optimisation; Biomechanics application; Material optimisation; Life cost optimisation; Intelligence structures and smart materials.
Download or read book Ultra High Performance Concrete and Nanotechnology in Construction Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials written by Insert Name Here and published by kassel university press GmbH. This book was released on 2012-01-01 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Steel Concrete Composite Structures Using High Strength Materials written by J.Y. Richard Liew and published by Woodhead Publishing. This book was released on 2021-08-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-strength materials offer alternatives to frequently used materials for high-rise construction. A material of higher strength means a smaller member size is required to resist the design load. However, high-strength concrete is brittle, and high-strength thin steel plates are prone to local buckling. A solution to overcome such problems is to adopt a steel-concrete composite design in which concrete provides lateral restraint to steel plates against local buckling, and steel plates provide confinement to high-strength concrete. Design of Steel-Concrete Composite Structures Using High Strength Materials provides guidance on the design of composite steel-concrete structures using combined high-strength concretes and steels. The book includes a database of over 2,500 test results on composite columns to evaluate design methods, and presents calculations to determine critical parameters affecting the strength and ductility of high-strength composite columns. Finally, the book proposes design methods for axial-moment interaction curves in composite columns. This allows a unified approach to the design of columns with normal- and high-strength steel concrete materials. This book offers civil engineers, structural engineers, and researchers studying the mechanical performance of composite structures in the use of high-strength materials to design and construct advanced tall buildings. Presents the design and construction of composite structures using high-strength concrete and high-strength steel, complementing and extending Eurocode 4 standards Addresses a gap in design codes in the USA, China, Europe and Japan to cover composite structures using high-strength concrete and steel in a comprehensive way Gives insight into the design of concrete-filled steel tubes and concrete-encased steel members Suggests a unified approach to designing columns with normal- and high-strength steel and concrete
Download or read book Structural Materials for Generation IV Nuclear Reactors written by Pascal Yvon and published by Woodhead Publishing. This book was released on 2016-08-27 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates Written by an expert in that particular area
Download or read book High Performance Structural Fibers for Advanced Polymer Matrix Composites written by National Research Council and published by National Academies Press. This book was released on 2005-05-09 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Military use of advanced polymer matrix composites (PMC)â€"consisting of a resin matrix reinforced by high-performance carbon or organic fibersâ€"while extensive, accounts for less that 10 percent of the domestic market. Nevertheless, advanced composites are expected to play an even greater role in future military systems, and DOD will continue to require access to reliable sources of affordable, high-performance fibers including commercial materials and manufacturing processes. As a result of these forecasts, DOD requested the NRC to assess the challenges and opportunities associated with advanced PMCs with emphasis on high-performance fibers. This report provides an assessment of fiber technology and industries, a discussion of R&D opportunities for DOD, and recommendations about accelerating technology transition, reducing costs, and improving understanding of design methodology and promising technologies.
Download or read book Structural Alloys for Nuclear Energy Applications written by Robert Odette and published by Newnes. This book was released on 2019-08-15 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance alloys that can withstand operation in hazardous nuclear environments are critical to presentday in-service reactor support and maintenance and are foundational for reactor concepts of the future. With commercial nuclear energy vendors and operators facing the retirement of staff during the coming decades, much of the scholarly knowledge of nuclear materials pursuant to appropriate, impactful, and safe usage is at risk. Led by the multi-award winning editorial team of G. Robert Odette (UCSB) and Steven J. Zinkle (UTK/ORNL) and with contributions from leaders of each alloy discipline, Structural Alloys for Nuclear Energy Applications aids the next generation of researchers and industry staff developing and maintaining steels, nickel-base alloys, zirconium alloys, and other structural alloys in nuclear energy applications. This authoritative reference is a critical acquisition for institutions and individuals seeking state-of-the-art knowledge aided by the editors’ unique personal insight from decades of frontline research, engineering and management. Focuses on in-service irradiation, thermal, mechanical, and chemical performance capabilities. Covers the use of steels and other structural alloys in current fission technology, leading edge Generation-IV fission reactors, and future fusion power reactors. Provides a critical and comprehensive review of the state-of-the-art experimental knowledge base of reactor materials, for applications ranging from engineering safety and lifetime assessments to supporting the development of advanced computational models.