Download or read book High Performance Stainless Steels written by Curtis W. Kovach and published by . This book was released on 2000 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Resistance of Stainless Steels written by C.P. Dillon and published by CRC Press. This book was released on 1995-05-04 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work examines the corrosion of stainless steels and similar chromium-bearing nickel-containing higher alloys, detailing various corrosive environments, including atmospheric and fire-side corrosion, corrosion by water and soil, and corrosion caused by particular industrial processes. It presents the acceptable isocorosion parameters of concentration and temperature for over 250 chemicals for which stainless alloys are the preferred materials of construction.
Download or read book New Developments in High strength Stainless Steels written by A. F. Hoenie and published by . This book was released on 1966 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents information on the physical metallurgy, chemical composition, mechanical and physical properties, corrosion resistance, fabrication, and cleaning of several of the newer high-strength stainless steels. The alloys covered include one semiaustenitic precipitation-hardenable stainless steel, PH14-8Mo, and the following martensitic precipitation- hardenable stainless steels: PH13-8Mo, 15-5PH, Custom 455, AM-363, AM-362, and AFC-77. Also included is 17-4PH as a sheet and strip product.
Download or read book Duplex Stainless Steels written by Iris Alvarez-Armas and published by John Wiley & Sons. This book was released on 2013-01-16 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Duplex Stainless Steels (DSSs) are chromium-nickel-molybdenum-iron alloys that are usually in proportions optimized for equalizing the volume fractions of austenite and ferrite. Due to their ferritic-austenitic microstructure, they possess a higher mechanical strength and a better corrosion resistance than standard austenitic steels. This type of steel is now increasing its application and market field due to its very good properties and relatively low cost. This book is a review of the most recent progress achieved in the last 10 years on microstructure, corrosion resistance and mechanical strength properties, as well as applications, due to the development of new grades. Special attention will be given to fatigue and fracture behavior and to proposed models to account for mechanical behavior. Each subject will be developed in chapters written by experts recognized around the international industrial and scientific communities. The use of duplex stainless steels has grown rapidly in the last 10 years, particularly in the oil and gas industry, chemical tankers, pulp and paper as well as the chemical industry. In all these examples, topics like welding, corrosion resistance and mechanical strength properties (mainly in the fatigue domain) are crucial. Therefore, the update of welding and corrosion properties and the introduction of topics like texture effects, fatigue and fracture strength properties, and mechanical behavior modeling give this book specific focus and character.
Download or read book Review of Recent Developments in the Technology of High strength Stainless Steels written by D. A. Roberts and published by . This book was released on 1961 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and development in the field of high-strength stainless steels appears to be directed along two principal paths: (1) the development of alloys with improved strength properties and (2) the accumulation of information on the properties and physical metallurgy of existing alloys so that they may be used more effectively. By and large, the development of new alloys is being carried out by the stainless-steel producers, while the accumulation of property data for the most part is being undertaken on Government contracts. (Author).
Download or read book Stainless Steels for Design Engineers written by Michael F. McGuire and published by ASM International. This book was released on 2008 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rate of growth of stainless steel has outpaced that of other metals and alloys, and by 2010 may surpass aluminum as the second most widely used metal after carbon steel. The 2007 world production of stainless steel was approximately 30,000,000 tons and has nearly doubled in the last ten years. This growth is occurring at the same time that the production of stainless steel continues to become more consolidated. One result of this is a more widespread need to understand stainless steel with fewer resources to provide that information. The concurrent technical evolution in stainless steel and increasing volatility of raw material prices has made it more important for the engineers and designers who use stainless steel to make sound technical judgments about which stainless steels to use and how to use them.
Download or read book Stainless Steels written by Joseph Ki Leuk Lai and published by Bentham Science Publishers. This book was released on 2012 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Stainless Steels: An Introduction and Their Recent Developments explains issues related to surface treatment, grain refinement, coloration, defect detection and powder metallurgy of stainless steels in detail with reference to new research findings. It al"
Download or read book Source Book on Stainless Steels written by American Society for Metals and published by . This book was released on 1976 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stainless Steels and Alloys written by Zoia Duriagina and published by BoD – Books on Demand. This book was released on 2019-02-13 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials science is the magic that allows us to change the chemical composition and microstructure of material to regulate its corrosion-mechanical, technological, and functional properties. Five major classes of stainless steels are widely used: ferritic, austenitic, martensitic, duplex, and precipitation hardening. Austenitic stainless steels are extensively used for service down to as low as the temperature of liquid helium (-269oC). This is largely due to the lack of a clearly defined transition from ductile to brittle fracture in impact toughness testing. Steels with ferritic or martensitic structures show a sudden change from ductile (safe) to brittle (unsafe) fracture over a small temperature difference. Even the best of these steels shows this behavior at temperatures higher than -100oC and in many cases only just below zero. Various types of stainless steel are used across the whole temperature range from ambient to 1100oC. This book will be useful to scientists, engineers, masters, graduate students, and students. I hope readers will enjoy this book and that it will serve to create new materials with unique properties.
Download or read book Corrosion of Stainless Steels written by A. John Sedriks and published by John Wiley & Sons. This book was released on 1996-04-19 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete, Up-to-Date Introduction to Corrosion of StainlessSteels and Metallurgical Factors This fully updated Second Editionof Corrosion of Stainless Steels covers the tremendous advancesmade with stainless steels in recent decades, includingapplications in many new areas--from marine technologies andoff-shore oil production to power plants and the kitchen sink. Thisbook offers unique insights into the corrosion mechanisms affectingstainless steels, details problem-avoidance strategies, and helpsidentify corrosion-resistant capabilities for these remarkablealloys Sponsored by the Electrochemical Society, Corrosion osStainless Steels * Provides a comprehensive introduction to the selection,development, and production of all types of stainless steels * Emphasizes how metallurgical factors affect corrosionresistance * Examines the limitations of stainless steels within the contextof a discussion on higher alloys * Takes an interdisciplinary approach that demonstrates thecombined effects of metallurgy, chemistry, and electrochemistry oncorrosion resistance * Provides baseline knowledge and testing standards for stainlesssteels, and facilitates failure analysis for industrial purposes orlitigation related to equipment failure This is a much-needed text for materials scientists, chemicalengineers, corrosion specialists, graduate students, and anyone whoneeds to be brought up to date on this subject.
Download or read book Stainless Steels written by Joseph R. Davis and published by ASM International. This book was released on 1994-01-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASM Specialty Handbook® Stainless Steels The best single-volume reference on the metallurgy, selection, processing, performance, and evaluation of stainless steels, incorporating essential information culled from across the ASM Handbook series. Includes additional data and reference information carefully selected and adapted from other authoritative ASM sources.
Download or read book A Century of Stainless Steels written by Vivekanand Kain and published by Trans Tech Publications Ltd. This book was released on 2013-09-04 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the completion of one century of discovery of stainless steels, it is appropriate to take stock of the latest trends in wide ranging fields that relate to stainless steels. The book covers advances in all the major aspects related to stainless steels namely melting & refining, fabrication & forming, welding & joining, physical metallurgy, corrosion and its control and experience from use of stainless steels in various industries including newer varieties of stainless steels. The book will be a good source of information regarding various aspects of stainless steels. Volume is indexed by Thomson Reuters CPCI-S (WoS).
Download or read book CASTI Handbook of Stainless Steels Nickel Alloys written by Stephen Lamb and published by ASM International(OH). This book was released on 1999 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloy Digest Sourcebook written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference documents ferrous alloy development as presented in Alloy Digest since 1952. Its concise data sheet summaries (which run about two pages) provide material composition, properties, heat treatment, fabrication characteristics, product forms, and applications. Following a general overvie
Download or read book Introduction to Stainless Steels written by Jonathan Beddoes and published by ASM International(OH). This book was released on 1999 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a basic and introductory reference, this book not only addresses stainless steels in the light of their resistance to corrosion for which they are more commonly recognised, but also explains the wide range of other useful properties attributable to the various and specific categories of these alloys. This book is a concise, easy-to-read introduction to one of the most widely used industrial materials. Each chapter explains an important concept related to the selection, application, processing and use of stainless steels. This book is indexed and includes appendices: (1) Identification of Stainless Steels in Service (2) Toxicity of Stainless Steel (3) Table of Equivalent Designations (this is not intended to be complete, but includes the more commonly used stainless steels and the most widely used designation systems). First published in 1965 and updated in 1986, this third edition is a completely new text.
Download or read book Advances in the Technology of Stainless Steels and Related Alloys written by and published by ASTM International. This book was released on 1983 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Nitrogen Steels and Stainless Steels written by U. Kamachi Mudali and published by . This book was released on 2004 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
