Download or read book High Performance Digital Control Tehniques for Powering Microprocessors written by Shangzhi Pan and published by . This book was released on 2008 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing power consumption and heat dissipation are becoming urgent challenges for processors today and in the future. Digital power control architectures in which processors closely interact with voltage regulators are becoming necessary to enhance system energy efficiency. Digital techniques offer advantages such as flexibility, fewer external components and reduced overall cost as compared to conventional analog techniques. The primary objective of this thesis is to develop new digital control architecture for processor voltage regulators with low complexity and high dynamic performance. A digital control technique to naturally implement the desired output impedance is proposed. In this technique, Adaptive Voltage Positioning (AVP) is implemented by generating a dynamic voltage reference and a dynamic current reference to achieve the desired output impedance. A dual-voltage-loop control with dynamic reference step adjustment, non-linear control and a dedicated transient detection circuit is proposed to improve the dynamic performance. The dynamic reference step adjustment method lowers the high speed requirement of reference update clock; the non-linear control minimizes the transient-assertion-to-action delay and maximizes the inductor current slew rate; and the transient detection circuit recognizes the load transient state in a manner adaptive to the amount and slew rate of load transient. Theoretical, simulation and experimental results prove the effective operation and excellent performance of the controller. Finally, the dynamic performance of the voltage regulator with the proposed digital controller under large-step load oscillations is proven by simulation and experimental results.

Download or read book Digital Control of High Frequency Switched Mode Power Converters written by Luca Corradini and published by John Wiley & Sons. This book was released on 2015-07-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the fundamental aspects of analysis, modeling and design of digital control loops around high-frequency switched-mode power converters in a systematic and rigorous manner Comprehensive treatment of digital control theory for power converters Verilog and VHDL sample codes are provided Enables readers to successfully analyze, model, design, and implement voltage, current, or multi-loop digital feedback loops around switched-mode power converters Practical examples are used throughout the book to illustrate applications of the techniques developed Matlab examples are also provided

Download or read book Control Techniques for Power Converters with Integrated Circuit written by Wen-Wei Chen and published by Springer. This book was released on 2017-12-28 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an overview of power electronic applications in the study of power integrated circuit (IC) design, collecting novel research ideas and insights into fast transient response to prevent the output voltage from dropping significantly at the undershoot. It also discusses techniques and training to save energy and increase load efficiency, as well as fast transient response and high efficiency, which are the most important factors for consumer products that implement power IC. Lastly, the book focuses on power electronics for system loop analysis and optimal compensation design to help users and engineers implement their applications. The book is a valuable resource for university researchers, power IC R&D engineers, application engineers and graduate students in power electronics who wish to learn about the power IC design principles, methods, system behavior, and applications in consumer products.

Download or read book Digital Control in Power Electronics 2nd Edition written by Simone Buso and published by Springer Nature. This book was released on 2022-05-31 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the reader, whether an electrical engineering student in power electronics or a design engineer, a selection of power converter control problems and their basic digital solutions, based on the most widespread digital control techniques. The presentation is primarily focused on different applications of the same power converter topology, the half-bridge voltage source inverter, considered both in its single- and three-phase implementation. This is chosen as the test case because, besides being simple and well known, it allows the discussion of a significant spectrum of the most frequently encountered digital control applications in power electronics, from digital pulse width modulation (DPWM) and space vector modulation (SVM), to inverter output current and voltage control, ending with the relatively more complex VSI applications related to the so called smart-grid scenario. This book aims to serve two purposes: (1) to give a basic, introductory knowledge of the digital control techniques applied to power converters; and (2) to raise the interest for discrete time control theory, stimulating new developments in its application to switching power converters.

Download or read book Digital Control in Power Electronics written by Simone Buso and published by Morgan & Claypool Publishers. This book was released on 2015-05-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the reader, whether an electrical engineering student in power electronics or a design engineer, a selection of power converter control problems and their basic digital solutions, based on the most widespread digital control techniques. The presentation is primarily focused on different applications of the same power converter topology, the half-bridge voltage source inverter, considered both in its single- and three-phase implementation. This is chosen as the test case because, besides being simple and well known, it allows the discussion of a significant spectrum of the most frequently encountered digital control applications in power electronics, from digital pulse width modulation (DPWM) and space vector modulation (SVM), to inverter output current and voltage control, ending with the relatively more complex VSI applications related to the so called smart-grid scenario. This book aims to serve two purposes: (1) to give a basic, introductory knowledge of the digital control techniques applied to power converters; and (2) to raise the interest for discrete time control theory, stimulating new developments in its application to switching power converters.

Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2023-09-27 with total page 1472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Handbook, Fifth Edition delivers an expert guide to power electronics and their applications. The book examines the foundations of power electronics, power semiconductor devices, and power converters, before reviewing a constellation of modern applications. Comprehensively updated throughout, this new edition features new sections addressing current practices for renewable energy storage, transmission, integration, and operation, as well as smart-grid security, intelligent energy, artificial intelligence, and machine learning applications applied to power electronics, and autonomous and electric vehicles. This handbook is aimed at practitioners and researchers undertaking projects requiring specialist design, analysis, installation, commissioning, and maintenance services. - Provides a fully comprehensive work addressing each aspect of power electronics in painstaking depth - Delivers a methodical technical presentation in over 1500 pages - Includes 50+ contributions prepared by leading experts - Offers practical support and guidance with detailed examples and applications for lab and field experimentation - Includes new technical sections on smart-grid security and intelligent energy, artificial intelligence, and machine learning applications applied to power electronics and autonomous and electric vehicles - Features new chapter level templates and a narrative progression to facilitate understanding

Download or read book Advanced Control Methodologies For Power Converter Systems written by Wensheng Luo and published by Springer Nature. This book was released on 2022-02-16 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present some advanced control methodologies for power converters. Power electronic converters have become indispensable devices for plenty of industrial applications over the last decades. Composed by controllable power switches, they can be controlled by effective strategies to achieve desirable transient response and steady-state performance, to ensure the stability, reliability and safety of the system. The most popular control strategy of power converters is the linear proportional–integral–derivative series control which is adopted as industry standard. However, when there exist parameter changes, nonlinearities and load disturbances in the system, the performance of the controller will be significantly degraded. To overcome this problem, many advanced control methodologies and techniques have been developed to improve the converter performance. This book presents the research work on some advanced control methodologies for several types of power converters, including three-phase two-level AC/DC power converter, three-phase NPC AC/DC power converter, and DC/DC buck converter. The effectiveness and advantage of the proposed control strategies are verified via simulations and experiments. The content of this book can be divided into two parts. The first part focuses on disturbance observer-based control methods for power converters under investigation. The second part investigates intelligent control methods. These methodologies provide a framework for controller design, observer design, stability and performance analysis for the considered power converter systems.

Download or read book Power Electronics Devices and Circuits written by V. Jagannathan (Prof.) and published by PHI Learning Pvt. Ltd.. This book was released on 2011-05 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a new enlarged edition of Introduction to Power Electronics. It is designed for undergraduate students of electrical and electronics engineering and provides an accessible and practical treatment of semiconductor power switching devices and their use in several types of static power converters. The book emphasizes the fundamental principles and offers an easy-to-understand explanation of the operation of practical circuits. Beginning with the study of the characteristics of power switching devices, the text offers a thorough treatment of ac-ac converters, ac-dc converters, dc-dc converters and inverters, helping students understand how switching converters can be made to generate almost any wave shape and frequency, how power converters are used in conjunction with electric drives, HVDC transmission systems, and so forth. The topics included in the second edition are: Ideal and real switches and drive circuits for gate commutation devices Single phase series converters and twelve pulse converters Switch mode power supply (SMPS) and switch mode dc-dc converters Resonant converters and uninterrupted power supply (UPS) KEY FEATURES: A large number of waveforms, diagrams that provide a vivid picture of circuit actions. A variety of solved examples to strengthen concepts. Numerous review questions, solved problems and unsolved problems with answers to develop a clear understanding of the basic principles.

Download or read book Digital Control in Power Electronics written by Simone Buso and published by Morgan & Claypool. This book was released on 2006 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Control in Power Electronics presents students of electrical engineering a basic introduction to typical power converter control problems, their digital solutions, and the most widespread digital control techniques. Although the presentation has been limited to a single converter topology (the half bridge voltage source inverter), the control topics represent a significant spectrum of the more frequently encountered digital control applications in power electronics. Authors Paolo Mattavelli and Simone Buso introduce the reader to basic control problems in power electronic circuits in order to illustrate widely applied digital solutions to these problems. They also aim to raise students' awareness of discrete time control theory, stimulating new developments in its application to power converters.

Download or read book Low Power Processors and Systems on Chips written by Christian Piguet and published by CRC Press. This book was released on 2018-10-03 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The power consumption of microprocessors is one of the most important challenges of high-performance chips and portable devices. In chapters drawn from Piguet's recently published Low-Power Electronics Design, this volume addresses the design of low-power microprocessors in deep submicron technologies. It provides a focused reference for specialists involved in systems-on-chips, from low-power microprocessors to DSP cores, reconfigurable processors, memories, ad-hoc networks, and embedded software. Low-Power Processors and Systems on Chips is organized into three broad sections for convenient access. The first section examines the design of digital signal processors for embedded applications and techniques for reducing dynamic and static power at the electrical and system levels. The second part describes several aspects of low-power systems on chips, including hardware and embedded software aspects, efficient data storage, networks-on-chips, and applications such as routing strategies in wireless RF sensing and actuating devices. The final section discusses embedded software issues, including details on compilers, retargetable compilers, and coverification tools. Providing detailed examinations contributed by leading experts, Low-Power Processors and Systems on Chips supplies authoritative information on how to maintain high performance while lowering power consumption in modern processors and SoCs. It is a must-read for anyone designing modern computers or embedded systems.

Download or read book Control in Power Electronics and Electrical Drives written by R. Zwicky and published by Elsevier. This book was released on 2014-06-28 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 97 papers which provide a valuable overview of the latest technical innovations in this rapidly expanding field. Areas of development which receive particular attention include the emergence of power switching transistors, the application of microprocessors to regulation and control of static converters and electrical drives, the use of more sophisticated control strategies and the utilization of power electronics in new application fields.

Download or read book High Performance Energy Efficient Microprocessor Design written by Vojin G. Oklobdzija and published by Springer Science & Business Media. This book was released on 2007-04-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the world’s most prominent microprocessor design leaders from industry and academia, this book provides complete coverage of all aspects of complex microprocessor design: technology, power management, clocking, high-performance architecture, design methodologies, memory and I/O design, computer aided design, testing and design for testability. The chapters provide state-of-the-art knowledge while including sufficient tutorial material to bring non-experts up to speed. A useful companion to design engineers working in related areas.

Download or read book ISPSD 04 written by and published by . This book was released on 2004 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Real Time Digital Control Applications written by A. Alonso-Concheiro and published by Elsevier. This book was released on 2014-05-23 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real Time Digital Control Applications is a compilation of papers presented at the Symposium on Real-Time Digital Control Applications, sponsored by the International Federation of Automatic Control (IFAC) and the International Federation for Information Processing (IFIP), held in Guadalajara, Mexico. The event is organized to provide developing countries with the opportunity to gain insights -- from the sharing of ideas and experiences of experts from around the world to the rapid growth and development of applications of real-time digital control systems, which is considered as the basis of industrial revolution. The book presents and discusses the various scientific, industrial, and technical applications of real-time digital control systems. Applications in power generation, water, metal processing, cement, food, and manufacturing industries are shown. The text also covers applications in robotics, biomedicine, monitoring and failure detection, fuel optimization and heat control, adaptive process control, modeling, and computer software. Industrial engineers, scientists, economists, computer scientists, robotics experts, planners, and technicians will find this book invaluable.

Download or read book Power Electronics and Its Applications written by Alok Jain and published by Penram International Publishing (India) Pvt. Ltd.. This book was released on 2004 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Paper written by and published by . This book was released on 1988 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of High Performance Microprocessor Circuits written by Anantha Chandrakasan and published by Wiley-IEEE Press. This book was released on 2001 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors present readers with a compelling, one-stop, advanced system perspective on the intrinsic issues of digital system design. This invaluable reference prepares readers to meet the emerging challenges of the device and circuit issues associated with deep submicron technology. It incorporates future trends with practical, contemporary methodologies.