Download or read book High Performance Computing in Science and Engineering 09 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2010-04-28 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the end of the year 2008, we have seen a strategic step towards a funct- ning HPC infrastructure on Tier-0 level in Germany. Based on an agreement (Verwaltungsabkommen") between the Federal Ministry of Education and " Research (BMBF) and the state ministries for research of Baden-Wurttem- · berg, Bayern, and Nordrhein-Westfalen, a budget of overall 400 Million Euro had been allocated - equally shared between federal and state authorities in a?ve year time frame - to establish the next generation of HPC systems at the Gauss Centre for Supercomputing (GCS) - consisting of the three nat- nal supercomputing centres HLRS (Stuttgart), NIC/JSC (Julich), and LRZ · (Munich). As part of that strategic initiative, in May 2009 already NIC/JSC has installed the?rst phase of the GCS HPC Tier-0 resources, an IBM Blue Gene/P with roughly 300. 000 Cores, this time in Julic · h, With that, the GCS provides the most powerfulhigh-performance computing infrastructure in - rope already today. HLRS and its partners in the GCS have agreed on a common strategy for the installation of the next generation of leading edge HPC systems. Over the next few years, HLRS and LRZ as the other two GCS centers will upgrade their systems accordingly. The plan is to have a Tier-0 HPC system within GCS operating at any time in this?ve year period. Asanintermediatestep, HLRShasreplacedmostoftheirNECSX-8nodes by the NEC SX-9/12M192, a system with roughly 20 TFLOPs peak

Download or read book High Performance Computing in Science and Engineering 09 written by Wolfgang E. Nagel and published by Springer. This book was released on 2009-12-17 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Computing in Science and Engineering Garching Munich 2009 written by Siegfried Wagner and published by Springer Science & Business Media. This book was released on 2010-08-12 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Leibniz Supercomputing Centre (LRZ) and the Bavarian Competence Network for Technical and Scienti?c High Performance Computing (KONWIHR) publish in the present book results of numerical simulations facilitated by the High P- formance Computer System in Bavaria (HLRB II) within the last two years. The papers were presented at the Fourth Joint HLRB and KONWIHR Review and - sult Workshop in Garching on 8th and 9th December 2009, and were selected from all progress reports of projects that use the HLRB II. Similar to the workshop two years ago, the majority of the contributed papers belong to the area of computational ?uid dynamics (CFD), condensed matter physics, astrophysics, chemistry, computer sciences and high-energy physics. We note a considerable increase of the user c- munity in some areas: Compared to 2007, the number of papers increased from 6 to 12 in condensed matter physics and from 2 to 5 in high-energy physics. Bio s- ences contributed only one paper in 2007, but four papers in 2009. This indicates that the area of application of supercomputers is continuously growing and entering new ?elds of research. The year 2007 saw two major events of particular importance for the LRZ. First, after a substantial upgrade with dual-core processors the SGI Altix 4700 superc- puter reached a peak performance of more than 62 Tera?op/s. And second, the n- pro?t organization Gauss Centre for Supercomputing e. V. (GCS) was founded on April 13th.

Download or read book High Performance Computing in Science and Engineering 20 written by Wolfgang E. Nagel and published by Springer Nature. This book was released on 2022-01-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2020. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book Introduction to High Performance Computing for Scientists and Engineers written by Georg Hager and published by CRC Press. This book was released on 2010-07-02 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by high performance computing (HPC) experts, Introduction to High Performance Computing for Scientists and Engineers provides a solid introduction to current mainstream computer architecture, dominant parallel programming models, and useful optimization strategies for scientific HPC. From working in a scientific computing center, the author

Download or read book High Performance Computing in Science and Engineering 15 written by Wolfgang E. Nagel and published by Springer. This book was released on 2016-02-05 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2015. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering written by Tomáš Kozubek and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 4th International Conference on High Performance Computing in Science and Engineering, HPCSE 2019, held in Karolinka, Czech Republic, in May 2019. The 9 papers presented in this volume were carefully reviewed and selected from 13 submissions. The conference provides an international forum for exchanging ideas among researchers involved in scientific and parallel computing, including theory and applications, as well as applied and computational mathematics. The focus of HPCSE 2019 was on models, algorithms, and software tools that facilitate efficient and convenient utilization of modern parallel and distributed computing architectures, as well as on large-scale applications.

Download or read book High Performance Computing in Science and Engineering 17 written by Wolfgang E. Nagel and published by Springer. This book was released on 2018-02-16 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2017. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance.The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing and Applications written by Wu Zhang and published by Springer. This book was released on 2010-03-10 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second International Conference on High-Performance Computing and Appli- tions (HPCA 2009) was a follow-up event of the successful HPCA 2004. It was held in Shanghai, a beautiful, active, and modern city in China, August 10–12, 2009. It served as a forum to present current work by researchers and software developers from around the world as well as to highlight activities in the high-performance c- puting area. It aimed to bring together research scientists, application pioneers, and software developers to discuss problems and solutions and to identify new issues in this area. This conference emphasized the development and study of novel approaches for high-performance computing, the design and analysis of high-performance - merical algorithms, and their scientific, engineering, and industrial applications. It offered the conference participants a great opportunity to exchange the latest research results, heighten international collaboration, and discuss future research ideas in HPCA. In addition to 24 invited presentations, the conference received over 300 contr- uted submissions from over ten countries and regions worldwide, about 70 of which were accepted for presentation at HPCA 2009. The conference proceedings contain some of the invited presentations and contributed submissions, and cover such research areas of interest as numerical algorithms and solutions, high-performance and grid c- puting, novel approaches to high-performance computing, massive data storage and processing, hardware acceleration, and their wide applications.

Download or read book Seeking solutions high performance computing for science written by United States. Congress. Office of Technology Assessment and published by DIANE Publishing. This book was released on 1991 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seeking Solutions written by and published by Office of Technology Assessment. This book was released on 1991 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Computing in Science and Engineering 10 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2010-12-14 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in simulation on supercomputers. Leading researchers present results achieved on systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2010. The reports cover all fields of computational science and engineering, ranging from CFD to computational physics and chemistry to computer science, with a special emphasis on industrially relevant applications. Presenting results for both vector systems and microprocessor-based systems, the book makes it possible to compare the performance levels and usability of various architectures. As HLRS operates the largest NEC SX-8 vector system in the world, this book gives an excellent insight into the potential of vector systems, covering the main methods in high performance computing. Its outstanding results in achieving the highest performance for production codes are of particular interest for both scientists and engineers. The book includes a wealth of color illustrations and tables.

Download or read book High Performance Computing in Science and Engineering 14 written by Wolfgang E. Nagel and published by Springer. This book was released on 2015-02-14 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS). The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering 03 written by Egon Krause and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in modeling and simulation on supercomputers. Leading German research groups present their results achieved on high-end systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2003. The reports cover all fields of computational science and engineering ranging from computational fluid dynamics via computational physics and chemistry to computer science. Special emphasis is given to industrially relevant applications. Presenting results for both vector-systems and micro-processor based systems, the book allows the reader to compare performance levels and usability of a variety of supercomputer architectures. In the light of the success of the Japanese Earth-Simulator, this book may serve as a guide book for a US response. The book covers the main methods in high performance computing. Its outstanding results in achieving highest performance for production codes are of particular interest for both the scientist and the engineer. The book comes with a wealth of color illustrations and tables of results.

Download or read book High Performance Computing in Science and Engineering 13 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2013-12-12 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in simulation on supercomputers. Leading researchers present results achieved on systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2013. The reports cover all fields of computational science and engineering ranging from CFD via computational physics and chemistry to computer science with a special emphasis on industrially relevant applications. Presenting results of one of Europe’s leading systems this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high performance computing. Its outstanding results in achieving highest performance for production codes are of particular interest for both the scientist and the engineer. The book comes with a wealth of coloured illustrations and tables of results.

Download or read book The Federal High Performance Computing Program written by and published by . This book was released on 1989 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Computing in Science and Engineering 11 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2012-01-05 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in simulation on supercomputers. Leading researchers present results achieved on systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2011. The reports cover all fields of computational science and engineering, ranging from CFD to computational physics and chemistry, to computer science, with a special emphasis on industrially relevant applications. Presenting results for both vector systems and microprocessor-based systems, the book allows readers to compare the performance levels and usability of various architectures. As HLRS operates not only a large cluster system but also one of the largest NEC vector systems in the world, this book also offers excellent insights into the potential of vector systems. The book covers the main methods used in high-performance computing. Its outstanding results in achieving highest performance for production codes are of particular interest for scientists and engineers alike. The book comes with a wealth of color illustrations and tables of results.