Download or read book High performance Buildings Simplified written by Tom Lawrence and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Textbook accompaniment to ASHRAE GreenGuide provides practical instruction, assessments, and case studies for engineering students"--

Download or read book High Performance Enclosures written by John Frederick Straube and published by . This book was released on 2012-01-30 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: high Performance Enclosures : Design Guide for Institutional, Commercial and Industrial Buildings in Cold Climates provides guidance for architects and building enclosure engineers working to meet the growing need for buildings that have significantly lower operational energy consumption. John Straube addresses a range of practical questions about low energy building enclosures that save energy while simultaneously improving durability, comfort, and rain control: How much of an impact can the enclosure, massing, and orientation have? How much glazing is appropriate and what options are available? How much does thermal bridging matter and how can it be minimized at difficult structural details? How does one detail thick layers of continuous insulation outside of steel stud walls? Can layers of insulating sheathing reduce the risk of moisture damage?--COVER.

Download or read book High Performance Building Guidelines written by Andrea Woodner and published by DIANE Publishing. This book was released on 2000 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: High performance buildings maximize operational energy savings; improve comfort, health, & safety of occupants & visitors; & limit detrimental effects on the environment. These Guidelines provide instruction in the new methodologies that form the underpinnings of high performance buildings. They further indicate how these practices may be accommodated within existing frameworks of capital project administration & facility management. Chapters: city process; design process; site design & planning; building energy use; indoor environment; material & product selection; water mgmt.; construction admin.; commissioning; & operations & maintenance.

Download or read book Window Systems for High performance Buildings written by John Carmody and published by W W Norton & Company Incorporated. This book was released on 2004 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenge in designing facades and selecting windows in commercial buildings is balancing many issues and criteria. This fact-packed handbook outlines the basics of glazing selection and provides critical information and performance data on the energy efficiency, interior environment, technical, and life-cycle-cost considerations that drive window design decisions in commercial buildings.

Download or read book Real Prospects for Energy Efficiency in the United States written by National Research Council and published by National Academies Press. This book was released on 2010-06-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: America's economy and lifestyles have been shaped by the low prices and availability of energy. In the last decade, however, the prices of oil, natural gas, and coal have increased dramatically, leaving consumers and the industrial and service sectors looking for ways to reduce energy use. To achieve greater energy efficiency, we need technology, more informed consumers and producers, and investments in more energy-efficient industrial processes, businesses, residences, and transportation. As part of the America's Energy Future project, Real Prospects for Energy Efficiency in the United States examines the potential for reducing energy demand through improving efficiency by using existing technologies, technologies developed but not yet utilized widely, and prospective technologies. The book evaluates technologies based on their estimated times to initial commercial deployment, and provides an analysis of costs, barriers, and research needs. This quantitative characterization of technologies will guide policy makers toward planning the future of energy use in America. This book will also have much to offer to industry leaders, investors, environmentalists, and others looking for a practical diagnosis of energy efficiency possibilities.

Download or read book High performance Commercial Building Systems written by Stephen Selkowitz and published by . This book was released on 2003 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report summarizes key technical accomplishments resulting from the three year PIER-funded R & D program, ''High Performance Commercial Building Systems'' (HPCBS). The program targets the commercial building sector in California, an end-use sector that accounts for about one-third of all California electricity consumption and an even larger fraction of peak demand, at a cost of over $10B/year. Commercial buildings also have a major impact on occupant health, comfort and productivity. Building design and operations practices that influence energy use are deeply engrained in a fragmented, risk-averse industry that is slow to change. Although California's aggressive standards efforts have resulted in new buildings designed to use less energy than those constructed 20 years ago, the actual savings realized are still well below technical and economic potentials. The broad goal of this program is to develop and deploy a set of energy-saving technologies, strategies, and techniques, and improve processes for designing, commissioning, and operating commercial buildings, while improving health, comfort, and performance of occupants, all in a manner consistent with sound economic investment practices. Results are to be broadly applicable to the commercial sector for different building sizes and types, e.g. offices and schools, for different classes of ownership, both public and private, and for owner-occupied as well as speculative buildings. The program aims to facilitate significant electricity use savings in the California commercial sector by 2015, while assuring that these savings are affordable and promote high quality indoor environments. The five linked technical program elements contain 14 projects with 41 distinct R & D tasks. Collectively they form a comprehensive Research, Development, and Demonstration (RD & D) program with the potential to capture large savings in the commercial building sector, providing significant economic benefits to building owners and health and performance benefits to occupants. At the same time this program can strengthen the growing energy efficiency industry in California by providing new jobs and growth opportunities for companies providing the technology, systems, software, design, and building services to the commercial sector. The broad objectives across all five program elements were: (1) To develop and deploy an integrated set of tools and techniques to support the design and operation of energy-efficient commercial buildings; (2) To develop open software specifications for a building data model that will support the interoperability of these tools throughout the building life-cycle; (3) To create new technology options (hardware and controls) for substantially reducing controllable lighting, envelope, and cooling loads in buildings; (4) To create and implement a new generation of diagnostic techniques so that commissioning and efficient building operations can be accomplished reliably and cost effectively and provide sustained energy savings; (5) To enhance the health, comfort and performance of building occupants. (6) To provide the information technology infrastructure for owners to minimize their energy costs and manage their energy information in a manner that creates added value for their buildings as the commercial sector transitions to an era of deregulated utility markets, distributed generation, and changing business practices. Our ultimate goal is for our R & D effort to have measurable market impact. This requires that the research tasks be carried out with a variety of connections to key market actors or trends so that they are recognized as relevant and useful and can be adopted by expected users. While some of this activity is directly integrated into our research tasks, the handoff from ''market-connected R & D'' to ''field deployment'' is still an art as well as a science and in many areas requires resources and a timeframe well beyond the scope of this PIER research program. The TAGs, PAC and other industry partners have assisted directly in this effort by reviewing and critiquing work to date, and by partnering in activities that advance results toward market impacts. The goals, objectives and key accomplishments of each technical program element and projects are described in the sections that follow. For each project we then summarize the Task Approach, the Outcomes of each task, and our Conclusions and Recommendations. We also provide a list and short summary of each significant research product e.g. report, prototype, software, standard, etc.

Download or read book Materials for Energy Efficiency and Thermal Comfort in Buildings written by Matthew R Hall and published by Elsevier. This book was released on 2010-04-21 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide. Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements. Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance. Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates. This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies Documents the development of advanced materials and sustainable technologies for applications in building design and construction Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation

Download or read book Sustainable Renovation written by Lisa Gelfand and published by John Wiley & Sons. This book was released on 2011-11-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete resource on performing sustainable renovations for both Historic and modern existing buildings This forward-looking and insightful guide explores how the sustainable renovation of existing buildings presents great opportunities for initiating extensive changes in the performance of the built environment. Great examples of existing building upgrades are examined, illustrating how to do sustainable renovations, along with current design approaches for radically improving the functionality of existing prewar, postwar, and late modern buildings. Sustainable Renovation saves its key focus for institutional and commercial buildings, but discusses the challenges they pose within a global scope that encompasses all building practices. Some of the discussions in this book include: The significance of energy and resource demands by the building sector and the urgency of reducing loads in existing buildings Management, design, and construction approaches to achieve major modernization in occupied buildings International case studies that focus on methods and benefits of successful sustainable transformations of existing building performance Repurposing buildings to preserve style and add performance remains a work in progress as designers and builders discover new methods for improving sustainable practices and standards. With incremental modernization and operations strategies available for immediate implementation, this book demonstrates the different ways of thinking necessary when considering and attempting the integration of sustainable concepts into existing buildings—and enables readers to rethink the world that's built around them.

Download or read book Evidenced based Design and Operations written by Cathy Higgins and published by . This book was released on 2013 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Retrofitting of Commercial Buildings written by Richard Hyde and published by Routledge. This book was released on 2015-01-28 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite recent improvements in energy efficiency being made in new build, it is important that the existing commercial building sector also take action to meet emission reduction targets. The objectives and challenges of such action will reduce the risk of the sector becoming obsolete due to high energy use and poor environmental performance. This book presents a theory-based, practice-support methodology to deal with sustainable retrofitting opportunities for existing commercial buildings in warm climates using bioclimatic design as the basis. The book has four main parts, focusing on eco-design and renovation, bioclimatic retrofitting, technological and behavioural change and case studies of retrofitting exemplars. In the first part, the context of climate change effects on design and renovation at the city scale is discussed. The second part looks at bioclimatic retrofitting as a 'design guide' for existing buildings, highlighting the significance of architectural design and engineering systems for energy performance. The technological and behavioural contexts of the existing building sector – policies, modelling, monitoring and trend analysis in respect to energy and environmental performance – are covered in part three. The final part gives some case studies showing the effectiveness of strategies suggested for effective environmental performance. This book is a must-have guide for all involved in the design and engineering of retrofitting projects in warm climates.

Download or read book HighPerformance Commercial Buildings written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a document that describes a roadmap for designing high performance commercial buildings.

Download or read book Energy Efficiency Guide for Existing Commercial Buildings written by Dennis R. Landsberg and published by American Society of Heating Refrigerating and Air-Conditioning Engineers. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This guide explains why building owners and managers should be concerned about energy efficiency. The first in a series, the goal of this resource is to help this audience evaluate current building operations and conduct the economic analysis necessary to make decisions to improve energy efficiency"--Provided by publisher.

Download or read book Improving Energy Efficiency in Commercial Buildings and Smart Communities written by Paolo Bertoldi and published by Springer Nature. This book was released on 2020-01-14 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings present fourteen peer-reviewed papers from the 10th International Conference on Improving Energy Efficiency in Commercial Buildings and Smart Communities, which was held March 21-22, 2018 in Frankfurt, Germany. This biannual conference aims to promote and diffuse the concept of energy efficiency in new and existing commercial buildings and to enlarge the market for low consumption and sustainable non-residential buildings. It also covers smart and sustainable districts, communities and cities, since energy systems efficiency and renewable energies are often optimized at the district or municipal level. The 2018 conference focused on advanced and innovative technologies to improve the energy efficiency of commercial buildings, communities and cities as well as the policies and measures by governments at various levels to improve energy efficiency. A particular focus was on Energy Service Companies (ESCOs). The conference addresses energy policy makers at international, national, and local level; academics, researchers and energy efficiency experts; ESCOs, utilities, buildings energy and environmental managers; buildings engineers and architects; and equipment manufacturers and commercial property investors.

Download or read book High performance Commercial Buildings written by United States. Department of Energy. Building Technology, State and Community Programs and published by . This book was released on 2001 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High performance Commercial Buildings written by and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pushing the Efficiency Envelope written by United States. Congress. House. Committee on Science and Technology (2007). Subcommittee on Energy and Environment and published by . This book was released on 2009 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effective Daylighting with High Performance Facades written by Kyle Konis and published by Springer. This book was released on 2017-05-09 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores advanced building-facade daylighting design practices based on diverse energy and human-factor performance metrics. It also defines effective daylighting by rethinking the simplified approach to glazing and facade systems to incorporate the local climate and the needs of building occupants as critical drivers of building performance, design solutions and technological innovation. It discusses state-of-the-art approaches in the context of simulation-based design workflows, innovative technologies and real project case studies, all targeting low and net-zero energy solutions that enhance occupant comfort. Readers benefit from a comprehensive approach that improves the feedback loop between design intent and performance in use. The book is intended for architects, lighting designers, facade engineers, manufacturers and building owners/operators, as well as advanced students.