Download or read book High Heat Flux Engineering in Solar Energy Applications written by and published by . This book was released on 1993 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar thermal energy systems can produce heat fluxes in excess of 10,000 kW/m2. This paper provides an introduction to the solar concentrators that produce high heat flux, the receivers that convert the flux into usable thermal energy, and the instrumentation systems used to measure flux in the solar environment. References are incorporated to direct the reader to detailed technical information.
Download or read book High Heat Flux Engineering written by and published by . This book was released on 1997 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Thermal Systems and Applications written by Mohsen Sheikholeslami and published by Elsevier. This book was released on 2024-05-28 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Thermal Systems and Applications: New Design Techniques for Improved Thermal Performance brings together the latest advances for the improved performance, efficiency, and integration of solar thermal energy (STE) technology. The book begins by introducing solar energy and solar thermal energy as a viable option in terms of green energy for industrial, commercial, and residential applications, as well as its role and potential within hybrid energy systems. This is followed by detailed chapters that focus on key innovations in solar thermal energy systems, covering novel approaches and techniques in areas such as flat plate solar collectors, modified evacuated tube solar collectors, solar parabolic trough collectors, linear Fresnel reflectors, photovoltaic thermal systems, phase change materials, nanotechnology, combined PVT-PCM systems, solar thermal systems and Trombe wall design, solar still units, and solar dish systems. Throughout the book, the coverage is supported by experimental and numerical modelling methods, and techniques are discussed and assessed with a view to improved electrical and thermal efficiency and performance. This is a valuable resource for researchers and advanced students in solar energy, thermal engineering, hybrid energy systems, renewable energy, mechanical engineering, nanotechnology, and materials science. This is also of interest to engineers, R&D professionals, scientists, and policy makers with an interest in solar thermal energy (STE) in an industrial, residential, or commercial setting. Introduces solar thermal energy (STE) and details the current state and future opportunities Reviews and analyzes the latest advances in solar thermal energy technology, design, methods, and applications Covers, in detail, the role of phase change materials and nanomaterials in STE systems
Download or read book Medium and High Temperature written by Jan Kreider and published by Academic Press. This book was released on 1979-01-28 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medium and High Temperature Solar Processes discusses the principles and economic viability of medium- and high-temperature solar processes. This book is organized into seven chapters that focus on the second law of thermodynamics and its use in matching solar collection methods to thermal processes. It also provides general design guidelines for small- and intermediate-scale applications of solar processes. The opening chapter presents an overview of energy use patterns in the United States and of the various solar-thermal processes considered in the book. The concepts of economics of solar systems and possible environmental impacts are also summarized. Chapter 2 deals with the quantity, geographic availability, and quality of solar radiation, with a particular emphasis on beam or direct radiation since it has the highest thermodynamic availability and is used by most elevated-temperature collectors. This chapter also describes the trigonometry of various solar tracking modes and optical properties of materials. Chapter 3 considers selected topics on thermodynamics and heat transfer, including various heat engine designs and their first and second law efficiencies; radiation heat transfer; and the properties of selective surfaces usable at high temperature. Chapter 4 covers the components and systems for medium-temperature processes, such as concentrating collectors, thermal storage, heat exchangers, and energy transport systems. Chapter 5 treats systems for power production, shaft power, industrial process heat, and total energy. Chapter 6 presents engineering design data for high-temperature collectors and their use in solar furnaces; central solar power plants; distributed power plants; and solar thermionics. The concluding chapter addresses the economics of the foregoing systems with an emphasis on methods and principles of analysis.
Download or read book Solar Thermal Energy Systems written by John R. Howell and published by Springer Nature. This book was released on 1982 with total page 1516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Thermal Energy Utilization written by Manfred Becker and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy crisis in 1973 and 1979 initiated a great number of activities and programs for low and high temperature applica tion of solar energy. Synthetic fuels and chemicals produced by solar energy is one of them, where temperatures in the range of 600-1000°C or even higher are needed. In principle such high temperatures can be produced in solar towers. For electricity production, the feasibility and operation of solar tower plants has been examined during the SSPS - project (Small Solar Power System) in Almeria, Spain. The objective of Solar Thermal Energy Utilization is to extend the experience from the former SSPS - program in to the field of solar produced synthetic fuels. New materials and technolo gies have to be developed in order to research this goal. Metallic components now in use for solar receivers need to be improved with respect to transient operation or possibly replaced by ceramics. High temperature processes, like steam-methane reforming, coal conversion and hydrogen produc tion need to be developed or at least adapted for the unconven tional solar operation. Therefore Solar Thermal Energy Utiliza tion is a long term program, which needs time for its develop ment much more time than the intervals expected in between further energy crisis. The "Studies on Technology and Applica tion on Solar Energy Utilization" is a necessary step in the right direction in order to prepare for the energy problems in the future.
Download or read book Advances in Solar Energy Technology written by H.P. Garg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of writing this three volume 'Advances in Solar Energy Technology' is to provide all the relevant latest information available in the field of Solar Energy (Applied as well as Theoretical) to serve as the best source material at one place. Attempts are made to discuss topics in depth to assist both the students (i.e. undergraduate, postgraduate, research scholars etc.) and the professionals (i.e. Consultancy, design, and contracting firms). Chapter 1 starts with a brief history of solar houses (active heating), one of the oldest and still the widely used application of Solar Energy. Various methods of build ing heating and other general aspects such as building form and functions are also described. Various components of active solar heating of building like solar collector, storage system, control unit, auxiliary heat source, etc. are discussed very briefly. Three types of solar active heating of buildings like Solar air systems, solar liquid systems, and solar assisted heat pump systems are discussed in detail in this chapter. Design details and performance of nine typical solar houses which are in use in different climatic conditions and using some newer concepts are also discussed in depth in this chapter.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concentrating Solar Thermal Energy written by Gilles Flamant and published by John Wiley & Sons. This book was released on 2022-09-14 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Sun, our star, has inspired the research of many scientists and engineers and brings hope to many of us for a paradigm shift in energy. Indeed, the applications of solar energy are manifold, primarily because it concerns both light and heat. Photovoltaic (PV) conversion is the most well-known among these, but other modes of conversion include photochemical, photobiological, photoelectrochemical, thermal and thermochemical. This book covers the entire chain of conversion from the Sun to the targeted energy vector (heat, electricity, gaseous or liquid fuels). Beginning with the state of the art, subsequent chapters address solar resources, concentration and capture technologies, the science of flows and transfers in solar receivers, materials with controlled optical properties, thermal storage, hybrid systems (PV-thermal) and synthetic fuels (hydrogen and synthetic gas). Written by a number of experts in the field, Concentrating Solar Thermal Energy provides an insightful overview of the current landscape of the knowledge regarding the most recent applications of concentrating technologies.
Download or read book Medium and High Temperature written by Jan Kreider and published by Elsevier. This book was released on 2012-12-02 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medium and High Temperature Solar Processes discusses the principles and economic viability of medium- and high-temperature solar processes. This book is organized into seven chapters that focus on the second law of thermodynamics and its use in matching solar collection methods to thermal processes. It also provides general design guidelines for small- and intermediate-scale applications of solar processes. The opening chapter presents an overview of energy use patterns in the United States and of the various solar-thermal processes considered in the book. The concepts of economics of solar systems and possible environmental impacts are also summarized. Chapter 2 deals with the quantity, geographic availability, and quality of solar radiation, with a particular emphasis on beam or direct radiation since it has the highest thermodynamic availability and is used by most elevated-temperature collectors. This chapter also describes the trigonometry of various solar tracking modes and optical properties of materials. Chapter 3 considers selected topics on thermodynamics and heat transfer, including various heat engine designs and their first and second law efficiencies; radiation heat transfer; and the properties of selective surfaces usable at high temperature. Chapter 4 covers the components and systems for medium-temperature processes, such as concentrating collectors, thermal storage, heat exchangers, and energy transport systems. Chapter 5 treats systems for power production, shaft power, industrial process heat, and total energy. Chapter 6 presents engineering design data for high-temperature collectors and their use in solar furnaces; central solar power plants; distributed power plants; and solar thermionics. The concluding chapter addresses the economics of the foregoing systems with an emphasis on methods and principles of analysis.
Download or read book Solar Thermal Energy Utilization written by Manfred Becker and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ener~y crisis in 1973 and 1979 initiated a great number of activities and programs for low and high temperature applica tion of solar energy. Synthetic fuels and chemicals produced by solar energy is one of them, where temperatures in the range of 600-1000°C or even higher are needed. In principle such high temperatures can be produced in solar towers. For electricity tower plants production, the feasibility and operation of solar Solar Power has been examined during the SSPS - project (Small System) in Almeria, Spain. extend The objective of Solar Thermal Energy Utilization is to field the experience from the former SSPS - program in to the of solar produced synthetic fuels. New materials and technolo gies have to be developed in order to research this goal. Metallic components now in use for solar receivers need to be improved with respect to transient operation or possibly replaced by ceramics. High temperature processes, like steam-methane reforming, coal conversion and hydrogen produc tion need to be developed or at least adapted for the unconven tional solar operation. Therefore Solar Thermal Energy Utiliza tion is a long term program, which needs time for its develop ment much more time than the intervals expected in between further energy crisis. The "Studies on Technology and Applica tion on Solar Energy Utilization" is a necessary step in the right direction in order to prepare for the energy problems in the future.
Download or read book Advances in Solar Energy Technology written by H.P. Garg and published by Springer Science & Business Media. This book was released on 1987-01-31 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of writing the three volume 'Advances in Solar Energy Technology' is to consolidate all the relevant latest information available in the field of solar energy (applied and theoretical in nature) and to as sist both the students ( i. e. undergraduate, postgraduate, research scholars etc.) and the professionals (i.e. consulting, design and contracting firms). I have discussed each and every topic in depth rather than a cursory overview. All the material required on a particular topic is included in the chapter and I have wherever possible given useful relationships in equation, graphical and tabular form. It is hoped that this completed Solar Energy Technol ogy will serve the best source material in this field. The first chapter deals with the evacuated tubular col lecors suitable to operate at a temperature of about 150°C with a daily energy collector efficiency in excess of 40 per cent. These collectors thus would be useful for efficient operation of Solar Airconditioning System, Power Generation and Process Heat System. Various advanced features like vacuum insulation, selective black coating, anti-reflective coating, heat pipe, cusp reflector, etc., used in designing this advanced type of collector are discussed separately in this chapter. Transient mathematical model for its perfor mance prediction and different designs of evacuated tubular collectors commercially produced in different countries of the world are described in brief to give the reader a good picture about their scopr and working.
Download or read book Ultra High Temperature Thermal Energy Storage Transfer and Conversion written by Alejandro Datas and published by Woodhead Publishing. This book was released on 2020-09-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-High Temperature Thermal Energy Storage, Transfer and Conversion presents a comprehensive analysis of thermal energy storage systems operating at beyond 800°C. Editor Dr. Alejandro Datas and his team of expert contributors from a variety of regions summarize the main technological options and the most relevant materials and characterization considerations to enable the reader to make the most effective and efficient decisions.This book helps the reader to solve the very specific challenges associated with working within an ultra-high temperature energy storage setting. It condenses and summarizes the latest knowledge, covering fundamentals, device design, materials selection and applications, as well as thermodynamic cycles and solid-state devices for ultra-high temperature energy conversion.This book provides a comprehensive and multidisciplinary guide to engineers and researchers in a variety of fields including energy conversion, storage, cogeneration, thermodynamics, numerical methods, CSP, and materials engineering. It firstly provides a review of fundamental concepts before exploring numerical methods for fluid-dynamics and phase change materials, before presenting more complex elements such as heat transfer fluids, thermal insulation, thermodynamic cycles, and a variety of energy conversation methods including thermophotovoltaic, thermionic, and combined heat and power. Reviews the main technologies enabling ultra-high temperature energy storage and conversion, including both thermodynamic cycles and solid-state devices Includes the applications for ultra-high temperature energy storage systems, both in terrestrial and space environments Analyzes the thermophysical properties and relevant experimental and theoretical methods for the analysis of high-temperature materials
Download or read book Concentrating Solar Power Technology written by Keith Lovegrove and published by Elsevier. This book was released on 2012-10-19 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concentrating solar power (CSP) technology is poised to take its place as one of the major contributors to the future clean energy mix. Using straightforward manufacturing processes, CSP technology capitalises on conventional power generation cycles, whilst cost effectively matching supply and demand though the integration of thermal energy storage. Concentrating solar power technology provides a comprehensive review of this exciting technology, from the fundamental science to systems design, development and applications. Part one introduces fundamental principles of concentrating solar power systems. Site selection and feasibility analysis are discussed, alongside socio-economic and environmental assessments. Part two focuses on technologies including linear Fresnel reflector technology, parabolic-trough, central tower and parabolic dish concentrating solar power systems, and concentrating photovoltaic systems. Thermal energy storage, hybridization with fossil fuel power plants and the long-term market potential of CSP technology are explored. Part three goes on to discuss optimisation, improvements and applications. Topics discussed include absorber materials for solar thermal receivers, design optimisation through integrated techno-economic modelling, heliostat size optimisation, heat flux and temperature measurement technologies, concentrating solar heating and cooling for industrial processes, and solar fuels and industrial solar chemistry. With its distinguished editors and international team of expert contributors, Concentrating solar power technology is an essential guide for all those involved or interested in the design, production, development, optimisation and application of CSP technology, including renewable energy engineers and consultants, environmental governmental departments, solar thermal equipment manufacturers, researchers and academics. Provides a comprehensive review of concentrating solar power (CSP) technology, from the fundamental science to systems design, development and applications Reviews fundamental principles of concentrating solar power systems, including site selection and feasibility analysis and socio-economic and environmental assessments Provides an overview of technologies such as linear Fresnel reflector technology, parabolic-trough, central tower and parabolic dish concentrating solar power systems, and concentrating photovoltaic systems
Download or read book Modeling and Optimization of Solar Thermal Systems Emerging Research and Opportunities written by Jagadish, and published by IGI Global. This book was released on 2020-11-27 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, scientists and researchers have been continually searching for efficient and effective ways to harness solar energy for heat and power production. The development of solar technologies and thermal systems are a prevalent area of study, as they represent a vital step in fully optimizing the potential of solar energy. Unfortunately, research is still lacking on the development and application of these solar thermal systems. Modeling and Optimization of Solar Thermal Systems: Emerging Research and Opportunities provides emerging research exploring the theoretical and practical aspects of optimizing the performance of solar thermal technologies using multicriteria decision-making techniques. Featuring coverage on a broad range of topics such as parabolic trough collectors, hybrid solar energy, and thermal technology, this book is ideally designed for practitioners, engineers, academicians, researchers, students, industry professionals, and educators seeking current research on modern modeling methods of solar thermal systems.
Download or read book Solar Energy Conversion written by and published by . This book was released on 1980 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Engineering of Thermal Processes written by John A. Duffie and published by Wiley-Interscience. This book was released on 1991 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the newest developments in solar energy science and technology are covered in this Second Edition. There is a thorough up-to-date review of solar energy principles and the functioning, design and economics of solar thermal processes. Convection and radiation, properties of materials, components, systems and applications to active space and water heating are discussed. Includes examples and problems of tabulated radiation data and conversion factors.
