Download or read book High Efficiency Micromachined Antennas Micromachined Antennas for Microwave and Mm Wave Applications written by and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project concentrates on the development of high efficiency Si micromachined antennas. Microstrip antennas are used in a broad range of applications from communication systems (radars, telemetry and navigation) to biomedical systems, primarily due to their simplicity, conformability and low manufacturing cost. With the recent development of microwave and millimeter-wave integrated circuits and the trend to incorporate all microwave devices on a single chip for low-cost and high density, there is a need to fabricate microstrip antennas in a monolithic fashion with the rest of the circuitry on semiconducting materials such as Silicon, GaAs or InP. These antennas, despite their planar character and low cost, suffer from high surface-wave excitation resulting in compromised efficiency, reduced bandwidth and degradation of the radiation pattern. Furthermore, in monolithic designs the feed lines share in most chases the same interface with the antennas and lead into parasitic radiation which deforms the antennas pattern and increases cross-talk. During the reporting period, our group has investigated the development of a variety of micromachined as listed below: (1) The antennas are Si micromachined for high efficiency and are excited by a corporate feed network which is packaged on-wafer to achieve reduced parasitic radiation and reduced cross polarization levels. (2) Micromachined antennas fed by a vertically integrated network, which excites the radiation elements by electromagnetic coupling through planar slots printed on the ground plane of the antennas. (3) Micromachined antennas, which can be reconfigured by use of a very fast, very low loss, MEMS switch. (4) Modeling of antenna and circuit structures using time domain multiresolution analysis. The study performed in each of these areas is described in detail in this report.

Download or read book Advanced Millimeter wave Technologies written by Duixian Liu and published by John Wiley & Sons. This book was released on 2009-03-03 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains one of the hottest topics in wireless and electronic devices community, namely the wireless communication at mmWave frequencies, especially at the 60 GHz ISM band. It provides the reader with knowledge and techniques for mmWave antenna design, evaluation, antenna and chip packaging. Addresses practical engineering issues such as RF material evaluation and selection, antenna and packaging requirements, manufacturing tolerances, antenna and system interconnections, and antenna One of the first books to discuss the emerging research and application areas, particularly chip packages with integrated antennas, wafer scale mmWave phased arrays and imaging Contains a good number of case studies to aid understanding Provides the antenna and packaging technologies for the latest and emerging applications with the emphases on antenna integrations for practical applications such as wireless USB, wireless video, phase array, automobile collision avoidance radar, and imaging

Download or read book High Efficiency Planar Microwave Antennas Assembled Using Millimetre Thick Micromachine Polymer Structures written by Sumanth Kumar Pavuluri and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Communication systems at microwave and millimetre wave regimes require compact broadband high gain antenna devices for a variety of applications, ranging from simple telemetry antennas to sophisticated radar systems. High performance can usually be achieved by fabricating the antenna device onto a substrate with low dielectric constant or recently through micromachining techniques. This thesis presents the design, fabrication, assembly and characterisation of microstrip and CPW fed micromachined aperture coupled single and stacked patch antenna devices. It was found that the micromachining approach can be employed to achieve a low dielectric constant region under the patch which results in suppression of surface waves and hence increasing radiation efficiency and bandwidth. A micromachining method that employs photolithography and metal deposition techniques was developed to produce high efficiency antenna devices. The method is compatible with integration of CMOS chips and filters onto a common substrate. Micromachined polymer rims (SU8 photoresist) was used to create millimetre thick air gaps between the patch and the substrate. The effect of the substrate materials and the dimensions of the SU8 polymer rims on the performance of the antenna devices were studied by numerical simulation using Ansoft HFSS electromagnetic field simulation package. The antenna structures were fabricated in layers and assembled by bonding the micromachined polymer spacers together. Low cost materials like SU8, polyimide and liquid crystal polymer films were used for fabrication and assembly of the antenna devices. A perfect patch antenna device is introduced by replacing the substrate of a conventional patch antenna device with air in order to compare with the micromachined antenna devices. The best antenna parameters for a perfect patch antenna device with air as a substrate medium are ~20% for bandwidth and 9.75 dBi for antenna gain with a radiation efficiency of 99.8%. In comparison, the best antenna gain for the simple micromachined patch antenna device was determined to be ~8.6 dBi. The bandwidth was ~20 % for a microstrip fed device with a single patch; it was ~40 % for stacked patch devices. The best bandwidth and gain of 6.58 GHz (50.5%) and 11.2 dBi were obtained for a micromachined sub-array antenna device. The simulation results show that the efficiency of the antenna devices is above 95 %. Finally, a novel high gain planar antenna using a frequency selective surface (FSS) was studied for operation at ~60 GHz frequency. The simulation results show that the novel antenna device has a substantial directivity of around 25 dBi that is required for the emerging WLAN communications at the 60 GHz frequency band.

Download or read book Wideband RF Technologies and Antennas in Microwave Frequencies written by Dr. Albert Sabban and published by John Wiley & Sons. This book was released on 2016-06-10 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents wideband RF technologies and antennas in the microwave band and millimeter-wave band This book provides an up-to-date introduction to the technologies, design, and test procedures of RF components and systems at microwave frequencies. The book begins with a review of the elementary electromagnetics and antenna topics needed for students and engineers with no basic background in electromagnetic and antenna theory. These introductory chapters will allow readers to study and understand the basic design principles and features of RF and communication systems for communications and medical applications. After this introduction, the author examines MIC, MMIC, MEMS, and LTCC technologies. The text will also present information on meta-materials, design of microwave and mm wave systems, along with a look at microwave and mm wave receivers, transmitters and antennas. Discusses printed antennas for wireless communication systems and wearable antennas for communications and medical applications Presents design considerations with both computed and measured results of RF communication modules and CAD tools Includes end-of-chapter problems and exercises Wideband RF Technologies and Antennas in Microwave Frequencies is designed to help electrical engineers and undergraduate students to understand basic communication and RF systems definition, electromagnetic and antennas theory and fundamentals with minimum integral and differential equations. Albert Sabban, PhD, is a Senior Researcher and Lecturer at Ort Braude College Karmiel Israel. Dr. Sabban was RF and antenna specialist at communication and Biomedical Hi-tech Companies. He designed wearable compact antennas to medical systems. From 1976 to 2007, Dr. Albert Sabban worked as a senior R&D scientist and project leader in RAFAEL.

Download or read book Substrate Integrated Millimeter Wave Antennas for Next Generation Communication and Radar Systems written by Zhi Ning Chen and published by John Wiley & Sons. This book was released on 2021-04-08 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substrate-Integrated Millimeter-Wave Antennas for Next-Generation Communication and Radar Systems The first and only comprehensive text on substrate-integrated mmW antenna technology, state-of-the-art antenna design, and emerging wireless applications Substrate-Integrated Millimeter-Wave Antennas for Next-Generation Communication and Radar Systems elaborates the most important topics related to revolutionary millimeter-wave (mmW) technology. Following a clear description of fundamental concepts including substrate-integrated waveguides and loss analysis, the text treats key design methods, prototyping techniques, and experimental setup and testing. The authors also highlight applications of mmW antennas in 5G wireless communication and next-generation radar systems. Readers are prepared to put techniques into practice through practical discussions of how to set up testing for impedance matching, radiation patterns, gain from 24GHz up to 325 GHz, and more. This book will bring readers state-of-the-art designs and recent progress in substrate-integrated mmW antennas for emerging wireless applications. Substrate-Integrated Millimeter-Wave Antennas for Next-Generation Communication and Radar Systems is the first comprehensive text on the topic, allowing readers to quickly master mmW technology. This book: Introduces basic concepts such as metamaterials Huygens’s surface, zero-index structures, and pattern synthesis Describes prototyping in the form of fabrication based on printed-circuit-board, low-temperature-co-fired-ceramic and micromachining Explores applications for next-generation radar and imaging systems such as 24-GHz and 77-GHz vehicular radar systems Elaborates design methods including waveguide-based feeding network, three-dimensional feeding structure, dielectric loaded aperture antenna element, and low-sidelobe synthesis The mmW is one of today’s most important emerging technologies. This book provides graduate students, researchers, and engineers with the knowledge they need to deploy mmW systems and develop new antenna designs with low cost, low loss, and low complexity.

Download or read book Novel Technologies for Microwave and Millimeter Wave Applications written by Jean-Fu Kiang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Technologies for Microwave and Millimeter-Wave Applications provides an overview of current research status in selected field, to facilitate a learning process from concepts to practices, from component design to system architecture, and from small scale to large scale. Each chapter focuses on a topic and is organized to be self-sufficient. Contents in each chapter include concise description of relevant background information, major issues, current trend and future challenges. Useful references are also listed for further reading. Novel Technologies for Microwave and Millimeter-Wave Applications is suitable as a textbook for senior or graduate courses in microwave engineering.

Download or read book Modern Microwave and Millimeter Wave Power Electronics written by Gregory S. Nusinovich and published by John Wiley & Sons. This book was released on 2005-04-19 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive study of microwave vacuum electronic devices and their current and future applications While both vacuum and solid-state electronics continue to evolve and provide unique solutions, emerging commercial and military applications that call for higher power and higher frequencies to accommodate massive volumes of transmitted data are the natural domain of vacuum electronics technology. Modern Microwave and Millimeter-Wave Power Electronics provides systems designers, engineers, and researchers-especially those with primarily solid-state training-with a thoroughly up-to-date survey of the rich field of microwave vacuum electronic device (MVED) technology. This book familiarizes the R&D and academic communities with the capabilities and limitations of MVED and highlights the exciting scientific breakthroughs of the past decade that are dramatically increasing the compactness, efficiency, cost-effectiveness, and reliability of this entire class of devices. This comprehensive text explores a wide range of topics: Traveling-wave tubes, which form the backbone of satellite and airborne communications, as well as of military electronic countermeasures systems Microfabricated MVEDs and advanced electron beam sources Klystrons, gyro-amplifiers, and crossed-field devices "Virtual prototyping" of MVEDs via advanced 3-D computational models High-Power Microwave (HPM) sources Next-generation microwave structures and circuits How to achieve linear amplification Advanced materials technologies for MVEDs A Web site appendix providing a step-by-step walk-through of a typical MVED design process Concluding with an in-depth examination of emerging applications and future possibilities for MVEDs, Modern Microwave and Millimeter-Wave Power Electronics ensures that systems designers and engineers understand and utilize the significant potential of this mature, yet continually developing technology. SPECIAL NOTE: All of the editors' royalties realized from the sale of this book will fund the future research and publication activities of graduate students in the vacuum electronics field.

Download or read book Novel Millimetre Wave Antennas for MIMO and 5G Applications written by Shiban Kishen Koul and published by Springer Nature. This book was released on 2021-11-30 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art millimetre wave antennas for next generation 5G communications. The propagation losses associated with the millimetre waves and the signal blockage due to the objects present between transmitter and receiver require novel antenna topologies to address these issues. Various aspects of antenna design related to millimetre wave 5G communication including 28-GHz channel characteristics, mmWave antenna requirements, antenna design strategies for 28 GHz, MIMO/multibeam antennas, and mmWave lens antennas are highlighted. Apart from the general antenna requirements and study related to the 28 GHz frequency band, various new metamaterial-based antennas employing uniaxial or biaxial anisotropic media that enhance the antenna radiation performance are covered in detail. In addition, various new antenna systems such as wide-scan antenna arrays, dual-polarized antennas, and dual-beam/multibeam antennas are covered in this book. The book concludes with the glimpses of the millimetre wave lens antennas and the design of very thin planar metamaterial lens for 5G massive MIMO applications.

Download or read book International Conference on Reliable Systems Engineering ICoRSE 2022 written by Daniela Doina Cioboată and published by Springer Nature. This book was released on 2022-08-25 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides both researchers in the academia, students, and industrial experts the chance to exchange new ideas, build relations, and find virtual partners. It is a scientific event whose proceedings have set a very high standard. ICORSE’s distinctive feature is represented by its breadth of topics: mechatronics, integronics and adaptronics; reliable systems engineering; cyber-physical systems; optics; theoretical and applied mechanics; robotics; modelling and simulation; smart integrated control systems; computer imaging processing; smart bio-medical and bio-mechatronic systems; MEMS and NEMS; new materials; sensors and transducers; nano-chemistry, physical chemistry of biological systems; micro- and nanotechnology; system optimization; communications, renewable energy and environmental engineering. They all come together to deliver a clear picture of the state of the art reached in these areas so far.

Download or read book Micromachined Circuits and Devices written by Shiban Kishen Koul and published by Springer Nature. This book was released on 2022-02-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of different switching and resonant devices using the present state-of-the-art radio frequency (RF) micromachining (MEMS) technology. Different topologies of MEMS switches have been discussed considering optimum performances over microwave to millimeter wave frequency range. Wide varieties of micromachined switching networks starting from single-pole-double-throw (SPDT) to single-pole-fourteen-throw (SP14T) are discussed utilizing vertical and lateral actuation movements of the switch. Different transduction mechanisms of micromachined resonators are highlighted that includes capacitive, piezoelectric, and piezoresistive types. The book provides major design guidelines for the development of MEMS-based digital phase shifters, tunable filters, and antennas with extensive measurement data. Apart from the radio frequency (RF) requirements, an extensive guideline is given for the improvement of the reliability of micromachined switches and digital phase shifters where multiple switches are operating simultaneously. It takes multiple iterations and extensive characterizations to conclude with a reliable MEMS digital phase shifter, and these aspects are given one of the prime attentions in this book. Detailed performance analysis of metamaterial inspired MEMS switches is then discussed for application in millimeter wave frequency bands up to about 170 GHz. The book concludes with future research activities of RF MEMS technology and its potential in space, defense, sensors, and biomedical applications.

Download or read book Millimetre Wave Antennas for Gigabit Wireless Communications written by Kao-Cheng Huang and published by John Wiley & Sons. This book was released on 2008-10-13 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete and comprehensive application-focused reference on millimetre wave antennas Millimetre Wave Antennas for Gigabit Wireless Communications covers a vast wealth of material with a strong focus on the current design and analysis principles of millimetre wave antennas for wireless devices. It provides practising engineers with the design rules and considerations required in designing antennas for the terminal. The authors include coverage of new configurations with advanced angular and frequency filtering characteristics, new design and analysis techniques, and methods for filter miniaturization. The book reviews up-to-date research results and utilizes numerous design examples to emphasize computer analysis and synthesis whilst also discussing the applications of commercially available software. Key Features: Advanced and up-to-date treatment of one of the fastest growing fields of wireless communications Covers topics such as Gigabit wireless communications and its required antennas, passive and active antenna design and analysis techniques, multibeam antennas and MIMO, IEEE 802.15.3c, WiMedia®, and advanced materials and technologies Offers a practical guide to integrated antennas for specific configurations requirements Addresses a number of complex, real-world problems that system and antenna engineers are going to face in millimetre-wave communications industry and provides solutions Contains detailed design examples, drawings and predicted performance This book is an invaluable tool for antenna professionals (engineers, designers, and developers), microwave professionals, wireless communication system professionals, and industries with microwave and millimetre wave research projects. Advanced students and researchers working in the field of millimetre wave engineering will also find this book very useful.

Download or read book Modern Antenna Handbook written by Constantine A. Balanis and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 1617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date, comprehensive treatment of classical and modern antennas and their related technologies Modern Antenna Handbook represents the most current and complete thinking in the field of antennas. The handbook is edited by one of the most recognizable, prominent, and prolific authors, educators, and researchers on antennas and electromagnetics. Each chapter is authored by one or more leading international experts and includes cover-age of current and future antenna-related technology. The information is of a practical nature and is intended to be useful for researchers as well as practicing engineers. From the fundamental parameters of antennas to antennas for mobile wireless communications and medical applications, Modern Antenna Handbook covers everything professional engineers, consultants, researchers, and students need to know about the recent developments and the future direction of this fast-paced field. In addition to antenna topics, the handbook also covers modern technologies such as metamaterials, microelectromechanical systems (MEMS), frequency selective surfaces (FSS), and radar cross sections (RCS) and their applications to antennas, while five chapters are devoted to advanced numerical/computational methods targeted primarily for the analysis and design of antennas.

Download or read book Millimeter Wave Antennas Configurations and Applications written by Jaco du Preez and published by Springer. This book was released on 2016-06-20 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews the state of the art in millimeter-wave antennas, traces important recent developments and provides information on a wide range of antenna configurations and applications. While fundamental theoretical aspects are discussed whenever necessary, the book primarily focuses on design principles and concepts, manufacture, measurement techniques, and practical results. Each of the various antenna types scalable to millimeter-wave dimensions is considered individually, with coverage of leaky-wave and surface-wave antennas, printed antennas, integrated antennas, and reflector and lens systems. The final two chapters address the subject from a systems perspective, providing an overview of supporting circuitry and examining in detail diverse millimeter-wave applications, including high-speed wireless communications, radio astronomy, and radar. The vast amount of information now available on millimeter-wave systems can be daunting for researchers and designers entering the field. This book offers readers essential guidance, helping them to gain a thorough understanding based on the most recent research findings and serving as a sound basis for informed decision-making.

Download or read book Low noise Receivers Micromachined Antennas and Low loss Transitions for Millimeter wave Applications written by Gildas Gauthier and published by . This book was released on 1999 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Lens Antennas for Communications Engineering written by John Thornton and published by John Wiley & Sons. This book was released on 2013-03-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the modern design principles and analysis of lens antennas. It gives graduates and RF/Microwave professionals the design insights in order to make full use of lens antennas. Why do we want to write a book in lens antennas? Because this topic has not been thoroughly publicized, its importance is underestimated. As antennas play a key role in communication systems, recent development in wireless communications would indeed benefit from the characteristics of lens antennas: low profile, and low cost etc. The major advantages of lens antennas are narrow beamwidth, high gain, low sidelobes and low noise temperature. Their structures can be more compact and weigh less than horn antennas and parabolic antennas. Lens antennas with their quasi-optical characteristics, also have low loss, particularly at near millimeter and submillimeter wavelengths where they have particular advantages. This book systematically conducts advanced and up-to-date treatment of lens antennas.

Download or read book Radio Frequency Micromachined Switches Switching Networks and Phase Shifters written by Shiban Kishen Koul and published by CRC Press. This book was released on 2019-05-03 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio Frequency Micromachined Switches, Switching Networks, and Phase Shifters discusses radio frequency microelectromechanical systems (RF MEMS)-based control components and will be useful for researchers and R&D engineers. It offers an in-depth study, performance analysis, and extensive characterization on micromachined switches and phase shifters. The reader will learn about basic design methodology and techniques to carry out extensive measurements on MEMS switches and phase shifters which include electrical, mechanical, power handling, linearity, temperature stability, reliability, and radio frequency performance. Practical examples included in the book will help readers to build high performance systems/subsystems using micromachined circuits. Key Features Provides simple design methodology of MEMS switches and switching networks including SPST to SP16T switches Gives an in-depth performance study of micromachined phase shifters. Detailed study on reliability and power handling capability of RF MEMS switches and phase shifters presented Proposes reconfigurable micromachined phase shifters Verifies a variety of MEMS switches and phase shifters experimentally

Download or read book Aperture Antennas for Millimeter and Sub Millimeter Wave Applications written by Artem Boriskin and published by Springer. This book was released on 2017-09-05 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the technology of millimetre waves and Terahertz (THz) antennas. It highlights the importance of moderate and high-gain aperture antennas as key devices for establishing point-to-point and point-to-multipoint radio links for far-field and near-field applications, such as high data-rate communications, intelligent transport, security imaging, exploration and surveillance systems. The book provides a comprehensive overview of the key antenna technologies developed for the mm wave and THz domains, including established ones – such as integrated lens antennas, advanced 2D and 3D horn antennas, transmit and reflect arrays, and Fabry-Perot antennas – as well as emerging metasurface antennas for near-field and far-field applications. It describes the pros and cons of each antenna technology in comparison with other available solutions, a discussion supplemented by practical examples illustrating the step-by-step implementation procedures for each antenna type. The measurement techniques available at these frequency ranges are also presented to close the loop of the antenna development cycle. In closing, the book outlines future trends in various antenna technologies, paving the way for further developments. Presenting content originating from the five-year ESF research networking program ‘Newfocus’ and co-authored by the most active and highly cited research groups in the domain of mm- and sub-mm-wave antenna technologies, the book offers a valuable guide for researchers and engineers in both industry and academia.