Download or read book High current Negative ion Sources for Pulsed Spallation Neutron Sources written by and published by . This book was released on 1995 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: The neutron scattering community has endorsed the need for a high-power (1 to 5 MW) accelerator-driven source of neutrons for materials research. Properly configured, the accelerator could produce very short (sub-microsecond) bursts of cold neutrons, said time structure offering advantages over the continuous flux from a reactor. The recent cancellation of the ANS reactor project has increased the urgency to develop a comprehensive strategy based on the best technological scenarios. Studies to date have built on the experience from ISIS (the 160 kW source in the UK), and call for a high-current (approx. 100 mA peak) H- source-linac combination injecting into one or more accumulator rings in which beam may be further accelerated. The I to 5 GeV proton beam is extracted in a single turn and brought to the target-moderator stations. The high current, high duty-factor, high brightness and high reliability required of the ion source present a very large challenge to the ion source community. The Workshop reported on here, held in Berkeley in October 1994, analyzed in detail the source requirements for proposed accelerator scenarios, the present performance capabilities of different H- source technologies, and identified necessary R & D efforts to bridge the gap.

Download or read book Development and Applications of Negative Ion Sources written by Vadim Dudnikov and published by Springer Nature. This book was released on 2023-06-22 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of sources of negative ions and their application in science and industry. It describes the physical foundations and implementation of the key methods of negative ion production and control, such as charge exchange, thermionic emission, plasma volume, secondary emission (sputtering) and surface-plasma sources, as well as the history of their development. Following on from this essential foundational material, the book goes on to explore transport of negative ion beams, and beam-plasma instabilities. Now in its second edition, the book has been substantially expanded and updated to address the many developments since it was first published, most importantly the development and investigation of cesiated surfaces with work function ~1.2-1.3 eV in conditions close to discharges in surface plasma sources. The book also includes a new chapter on development of conversion targets for high-energy neutral beam injectors, covering gas targets, plasma targets and photon targets for efficient conversion of high energy negative ion beams to neutral beams. With exposition accessible at the graduate level, and a comprehensive bibliography, this book will appeal to all students and researchers whose work concerns ion sources and their applications to accelerators, beam physics, storage rings, cyclotrons, and plasma traps.

Download or read book Proceedings of the Workshop on Ion Source Issues Relevant to a Pulsed Spallation Neutron Source written by and published by . This book was released on 1994 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: The workshop reviewed the ion-source requirements for high-power accelerator-driven spallation neutron facilities, and the performance of existing ion sources. Proposals for new facilities in the 1- to 5-MW range call for a widely differing set of ion-source requirements. For example, the source peak current requirements vary from 40 mA to 150 mA, while the duty factor ranges from 1% to 9%. Much of the workshop discussion centered on the state-of-the-art of negative hydrogen ion source (H−) technology and the present experience with Penning and volume sources. In addition, other ion source technologies, for positive ions or CW applications were reviewed. Some of these sources have been operational at existing accelerator complexes and some are in the source-development stage on test stands.

Download or read book Ion Source Requirements for Pulsed Spallation Neutron Sources written by and published by . This book was released on 1995 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The neutron scattering community has endorsed the need for a high- power (1 to 5 MW) accelerator-driven source of neutrons for materials research. Properly configured, the accelerator could produce very short (sub-microsecond) bursts of cold neutrons, said time structure offering advantages over the continuous flux from a reactor for a large class of experiments. The recent cancellation of the ANS reactor project has increased the urgency to develop a comprehensive strategy based on the best technological scenarios. Studies to date have built on the experience from ISIS (the 160 KW source in the UK), and call for a high-current (approx. 100 mA peak) H− source-linac combination injecting into one or more accumulator rings in which beam may be further accelerated. The 1 to 5 GeV proton beam is extracted in a single turn and brought to the target-moderator stations. The high current, high duty-factor, high brightness and high reliability required of the ion source present a very large challenge to the ion source community. A workshop held in Berkeley in October 1994, analyzed in detail the source requirements for proposed accelerator scenarios, the present performance capabilities of different H− source technologies, and identified necessary R & D efforts to bridge the gap.

Download or read book Physics and Applications of Hydrogen Negative Ion Sources written by Marthe Bacal and published by Springer Nature. This book was released on 2023-05-10 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of hydrogen negative ion sources and their applications to particle acceleration and nuclear fusion. The book begins with fundamental aspects of negative ion production by volume and surface processes in hydrogen and its isotopes. It covers key topics, such as the need for separation of negative ion production and extraction regions, the need for lowering the work function of the plasma electrode by using caesium vapor or special materials for caesium-free sources, and the ion extractor structure required for hydrogen negative ion sources. Chapters covering various specific ion sources and applications are written by scientists who participated in their development and include sources for accelerators and for neutral beam injection into controlled nuclear fusion reactors.

Download or read book The Savannah River Accelerator Project And Complementary Spallation Neutron Sources written by Frank T Avignone Iii and published by World Scientific. This book was released on 1998-02-24 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume is a collection of papers dealing with the applications of spallation neutron sources to pure science, applied science and defense programs. The topics, ranging from accelerator technology to applications in materials science and neutrino physics, are covered by experts in their respective fields.

Download or read book H Ion Sources for High Intensity Proton Drivers written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Existing RF Surface Plasma Sources (SPS) for accelerators have specific efficiencies for H+ and H- ion generation around 3 to 5 mA/cm2 per kW, where about 50 kW of RF power is typically needed for 50 mA beam current production. The Saddle Antenna (SA) SPS described here was developed to improve H- ion production efficiency, reliability and availability for pulsed operation as used in the ORNL Spallation Neutron Source . At low RF power, the efficiency of positive ion generation in the plasma has been improved to 200 mA/cm2 per kW of RF power at 13.56 MHz. Initial cesiation of the SPS was performed by heating cesium chromate cartridges by discharge as was done in the very first versions of the SPS. A small oven to decompose cesium compounds and alloys was developed and tested. After cesiation, the current of negative ions to the collector was increased from 1 mA to 10 mA with RF power 1.5 kW in the plasma (6 mm diameter emission aperture) and up to 30 mA with 4 kW RF power in the plasma and 250 Gauss longitudinal magnetic field. The ratio of electron current to negative ion current was improved from 30 to 2. Stable generation of H- beam without intensity degradation was demonstrated in the aluminum nitride (AlN) discharge chamber for 32 days at high discharge power in an RF SPS with an external antenna. Some modifications were made to improve the cooling and cesiation stability. The extracted collector current can be increased significantly by optimizing the longitudinal magnetic field in the discharge chamber. While this project demonstrated the advantages of the pulsed version of the SA RF SPS as an upgrade to the ORNL Spallation Neutron Source, it led to a possibility for upgrades to CW machines like the many cyclotrons used for commercial applications. Four appendices contain important details of the work carried out under this grant.

Download or read book Pulsed Spallation Neutron Source with an Induction Linac and a Fixed field Alternating gradient Accelerator written by and published by . This book was released on 1995 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paper describes an accelerator scenario of a Pulsed Spallation Neutron Source made of an Induction Linac injecting into a Fixed-Field Alternating-Gradient Accelerator (FFAG). The motivations underlying the proposal deal with the concern of removing technical risks peculiar to other scenarios involving RF Linacs, Synchrotrons and Accumulator Rings, which originate, for example, from the need of developing intense negative-ion sources and of multi-turn injection into the Compressor Rings. The system proposed here makes use of a positive-ion source of very short pulse duration, and of single-turn transfer into the circular accelerator.

Download or read book A Suspendable Pulsed Neutron Source written by Lawrence Ruby and published by . This book was released on 1956 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Physics and Technology of Ion Sources written by Ian G. Brown and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this title has become a well-known reference book on ion sources. The field is evolving constantly and rapidly, calling for a new, up-to-date version of the book. In the second edition of this significant title, editor Ian Brown, himself an authority in the field, compiles yet again articles written by renowned experts covering various aspects of ion source physics and technology. The book contains full chapters on the plasma physics of ion sources, ion beam formation, beam transport, computer modeling, and treats many different specific kinds of ion sources in sufficient detail to serve as a valuable reference text.

Download or read book Production and Neutralization of Negative Ions and Beams written by Joseph D. Sherman and published by American Institute of Physics. This book was released on 2005-04-20 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This symposium addresses all aspects of H- and D- sources, the formation of negative hydrogen and deuterium beams from these sources, and their beam transport properties. The discussion includes both the latest theoretical and experimental work in these areas. The negative ion sources are multicusp, Penning, magnetron, rf (1-13 MHz), surface converter, microwave/ECR (GHz frequency), and polarized source types. Experimental work also includes beam chopping, space-charge lenses, optimized negative ion extraction systems, and beam diagnostics. The negative ion production mechanisms are volume (pure hydrogen or deuterium discharge) and surface production using cesium or other alkali metal to catalyze negative ion production. Theoretical analyses include plasma chemistry, particle-in-cell modeling, and H-/D- extraction physics simulations. The main applications for H- sources are in high-energy neutral beam injectors for fusion reactors and H- sources for charge exchange injection into synchrotrons or spallation neutron source storage rings.

Download or read book Production and Neutralization of Negative Ions and Beams written by Krsto Prelec and published by . This book was released on 1996 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 1654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book 30 Years of High intensity Negative Ion Sources for Accelerators written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Thirty years ago, July 1, 1971, significant enhancement of negative ion emission from a gas discharge following an admixture of cesium was observed for the first time. This observation became the basis for the development of Surface Plasma Sources (SPS) for efficient production of negative ions from the interaction of plasma particles with electrodes on which adsorbed cesium reduced the surface work-function. The emission current density of negative ions increased rapidly from j (approximately) 10 mA/cm2 to 3.7 A/cm2 with a flat cathode and up to 8 A/cm2 with an optimized geometrical focusing in the long pulse SPS, and to 0.3 A/cm2 for DC SPS, recently increased up to 0.7 A/cm2. Discovery of charge-exchange cooling helped decrease the negative ion temperature T below 1 eV, and increase brightness by many orders to a level compatible with the best proton sources, B = j/T> 1 A/cm2 eV. The combination of the SPS with charge-exchange injection improved large accelerators operation and has permitted beam accumulation up to space-charge limit and overcome this limit several times. The early SPS for accelerators have been in operation without modification for (approximately) 25 years. Advanced version of the SPS for accelerators is described. Features of negative ion beam formation, transportation, space-charge neutralization-overneutralization, and instability damping is considered. Practical aspects of SPS operation and high brightness beam production is discussed.

Download or read book Handbook of Ion Sources written by Bernhard Wolf and published by CRC Press. This book was released on 1995-08-31 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Ion Sources delivers the data needed for daily work with ion sources. It also gives information for the selection of a suitable ion source and ion production method for a specific application. The Handbook concentrates on practical aspects and introduces the principle function of ion sources. The basic plasma parameters are defined and discussed. The working principles of various ion sources are explained, and examples of each type of ion source are presented with their operational data. Tables of ion current for various elements and charge states summarize the performance of different ion sources. The problems related to the production of ions of non-gaseous elements are detailed, and data on useful materials for evaporation and ion source construction are summarized. Additional chapters are dedicated to extraction and beam formation, ion beam diagnosis, ion source electronics, and computer codes for extraction, acceleration, and beam transport. Emittance and brilliance are described and space charge effects and neutralization discussed. Various methods for the measurement of current, profile, emittance, and time structure are presented and compared. Intensity limits for these methods are provided for different ion energies. Typical problems related to the operation of ion source plasmas are discussed and practical examples of circuits are given. The influence of high voltage on ion source electronics and possibilities for circuit protection are covered. The generation of microwaves and various microwave equipment are described and special problems related to microwave operation are summarized. The Handbook of Ion Sources is a valuable reference on the subject, of benefit to practitioners and graduate students interested in accelerators, ion implantation, and ion beam techniques.

Download or read book Performance of the H Ion Source for the Intense Pulsed Neutron Source written by and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In January of 1983, a magnetron type H− ion source was installed in the Intense Pulse Neutron Source (IPNS) at Argonne National Laboratory. The higher available H− current has helped enable the weekly average intensity of the Rapid Cycling Synchrotron (RCS) to be increased from 8 .mu. A to over 12 .mu. A. After two years of operation, the reliability of the source producing 40 mA of H− ions at a 30 Hz repetition rate continues to be excellent.

Download or read book Bibliography of Mass Spectroscopy Literature for 1970 written by and published by . This book was released on 1972 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: