Download or read book High average power Diode pumped Yb written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A scaleable diode end-pumping technology for high-average-power slab and rod lasers has been under development for the past several years at Lawrence Livermore National Laboratory (LLNL). This technology has particular application to high average power Yb:YAG lasers that utilize a rod configured gain element. Previously, this rod configured approach has achieved average output powers in a single 5 cm long by 2 mm diameter Yb:YAG rod of 430 W cw and 280 W q-switched. High beam quality (M2 = 2.4) q-switched operation has also been demonstrated at over 180 W of average output power. More recently, using a dual rod configuration consisting of two, 5 cm long by 2 mm diameter laser rods with birefringence compensation, we have achieved 1080 W of cw output with an M2 value of 13.5 at an optical-to-optical conversion efficiency of 27.5%. With the same dual rod laser operated in a q-switched mode, we have also demonstrated 532 W of average power with an M2

Download or read book High Average Power Q Switched Diode Pumped Yb YAG Laser written by and published by . This book was released on 2004 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Average Power Diode Pumped Solid State Lasers Power Scaling With High Spectral and Spatial Coherence written by and published by . This book was released on 2009 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main program objective was the development of a kilowatt class, cw Nd:YAG diode-laser-pumped solid-state laser (DPSSL) with quantum noise limited amplitude and phase, 24by7 operation capability and the ability to be repaired while in operation. The approach was a master-oscillator power-amplifier (MOPA) laser utilizing a series of zig-zag slab power amplifiers stages. We developed fiber amplifiers at the 200W level to generate power with high optical efficiency that can effectively extract energy from the power amplifier slabs. We also worked on the generation of high average power visible light by developing nonlinear optical materials with large apertures, low photo-refraction and minimal visible induced infrared absorption. The second objective was to develop a 1 joule, pulse-modulated, diffraction limited MOPA laser with less than 1 MHz line-width. A follow-on objective was frequency conversion to 1.5 or 2.0 microns for remote sensing applications. We demonstrated Yb:YAG slab lasers pumped with high brightness laser diodes. Supporting this project was the development of laser diodes operating in the 1.5 micron region for pumping of erbium doped laser hosts, and the synthesis of new low-loss polycrystalline laser host materials for in-band pumping into the upper laser level to improve the laser efficiency at eye-safe wavelengths. We developed orientation patterned Ga-As to frequency convert high peak power 1-micron radiation to eye-safe wavelengths in the mid-infrared for defense applications. The third objective, power scaling and determining the potential for phase-locking of ultra-fast laser systems for a wide range of sensing and machining applications, was demonstrated as well.

Download or read book Pump Module for High Average Power Diode Pumped Solid State Lasers written by and published by . This book was released on 2001 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this DURIP-99 University Research Instrumentation Program, F49620-99-1-0200 was to acquire laser diode pump modules to enable research on high average power, scalable DPSS lasers, nonlinear optical materials, and the continued education of Ph.D.students in this field. Twelve 940 nm fiber-coupled 55 W laser diode units were purchased, along with six power supplies and a controller. This system is currently in use to pump a zigzag slab laser using Yb:YAG as the active medium. Numerical modeling predicts that Yb:YAG slab lasers can be scaled to the 100kW level. Twenty-four 808 nm fiber-coupled 30 W laser diode units were purchased, along with four power supplies, four temperature controller units and a controller. This system has been used to demonstrate phased array output from a zigzag Nd:YAG slab laser. This advance opens the engineering path toward scaling slab lasers to 100kW power levels.

Download or read book Handbook of Solid State Lasers written by B Denker and published by Elsevier. This book was released on 2013-02-20 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-state lasers which offer multiple desirable qualities, including enhanced reliability, robustness, efficiency and wavelength diversity, are absolutely indispensable for many applications. The Handbook of solid-state lasers reviews the key materials, processes and applications of solid-state lasers across a wide range of fields.Part one begins by reviewing solid-state laser materials. Fluoride laser crystals, oxide laser ceramics, crystals and fluoride laser ceramics doped by rare earth and transition metal ions are discussed alongside neodymium, erbium and ytterbium laser glasses, and nonlinear crystals for solid-state lasers. Part two then goes on to explore solid-state laser systems and their applications, beginning with a discussion of the principles, powering and operation regimes for solid-state lasers. The use of neodymium-doped materials is considered, followed by system sizing issues with diode-pumped quasi-three level materials, erbium glass lasers, and microchip, fiber, Raman and cryogenic lasers. Laser mid-infrared systems, laser induced breakdown spectroscope and the clinical applications of surgical solid-state lasers are also explored. The use of solid-state lasers in defense programs is then reviewed, before the book concludes by presenting some environmental applications of solid-state lasers.With its distinguished editors and international team of expert contributors, the Handbook of solid-state lasers is an authoritative guide for all those involved in the design and application of this technology, including laser and materials scientists and engineers, medical and military professionals, environmental researchers, and academics working in this field. - Reviews the materials used in solid-state lasers - Explores the principles of solid-state laser systems and their applications - Considers defence and environmental applications

Download or read book Diode pumped Yb written by and published by . This book was released on 1995 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Photonics written by Ralf Menzel and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deals with the fundamental properties of photon and light beams, both experimentally and theoretically. It covers the essentials of linear interactions and most of the nonlinear interactions between light and matter in both the transparent and absorbing cases. About 4000 references open access to original literature.

Download or read book Diode pumped Ytterbium doped Phosphate and Tungstate Regenerative Amplifiers and Ancillary Investigations written by Xiaohua Liu and published by . This book was released on 2001 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Specialty Optical Fibers written by Mário Fernando Santos Ferreira and published by Elsevier. This book was released on 2024-02-17 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specialty Optical Fibers reviews theoretical and experimental photonic research relevant to the synthesis, processing, characterization, modeling, physical features, and applications of Specialty Optical Fibers (SOFs) with significant technological impact potential. All fiber-based advanced photonics device components rely on specialty optical fibers, which have either a unique waveguide structure or a novel material composition. High power optical amplifiers, high power fiber, and novel fabrication techniques for optical fiber design have enabled significant technological advances. The book provides discussion on these applications including current research directions, future opportunities and remaining challenges.Specialty Optical Fibers is suitable for researchers in academia and practitioners in R&D working in the subject areas of materials science, electrical engineering, and fiber optics. - Includes an overview of specialty optical fiber materials design and fabrication technologies - Reviews fundamentals of the most relevant optical fiber materials, including their physics, chemistry, and optoelectronics principles - Explores current research directions and future opportunities and challenges of utilization of optical fibers for a wide range of diverse applications

Download or read book High Power Diode pumped Solid state Lasers written by Iain M. Botheroyd and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Springer Handbook of Lasers and Optics written by Frank Träger and published by Springer Science & Business Media. This book was released on 2012-05-05 with total page 1704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition features numerous updates and additions. Especially 4 new chapters on Fiber Optics, Integrated Optics, Frequency Combs and Interferometry reflect the changes since the first edition. In addition, major complete updates for the chapters: Optical Materials and Their Properties, Optical Detectors, Nanooptics, and Optics far Beyond the Diffraction Limit. Features Contains over 1000 two-color illustrations. Includes over 120 comprehensive tables with properties of optical materials and light sources. Emphasizes physical concepts over extensive mathematical derivations. Chapters with summaries, detailed index Delivers a wealth of up-to-date references.

Download or read book Opportunities in Intense Ultrafast Lasers written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-01-31 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laser has revolutionized many areas of science and society, providing bright and versatile light sources that transform the ways we investigate science and enables trillions of dollars of commerce. Now a second laser revolution is underway with pulsed petawatt-class lasers (1 petawatt: 1 million billion watts) that deliver nearly 100 times the total world's power concentrated into a pulse that lasts less than one-trillionth of a second. Such light sources create unique, extreme laboratory conditions that can accelerate and collide intense beams of elementary particles, drive nuclear reactions, heat matter to conditions found in stars, or even create matter out of the empty vacuum. These powerful lasers came largely from U.S. engineering, and the science and technology opportunities they enable were discussed in several previous National Academies' reports. Based on these advances, the principal research funding agencies in Europe and Asia began in the last decade to invest heavily in new facilities that will employ these high-intensity lasers for fundamental and applied science. No similar programs exist in the United States. Opportunities in Intense Ultrafast Lasers assesses the opportunities and recommends a path forward for possible U.S. investments in this area of science.

Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by BoD – Books on Demand. This book was released on 2012-10-31 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.

Download or read book Laser Cooling written by Galina Nemova and published by CRC Press. This book was released on 2016-10-26 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the recent decades, laser cooling or optical refrigeration—a physical process by which a system loses its thermal energy as a result of interaction with laser light—has garnered a great deal of scientific interest due to the importance of its applications. Optical solid-state coolers are one such application. They are free from liquids as well as moving parts that generate vibrations and introduce noise to sensors and other devices. They are based on reliable laser diode pump systems. Laser cooling can also be used to mitigate heat generation in high-power lasers. This book compiles and details cutting-edge research in laser cooling done by various scientific teams all over the world that are currently revolutionizing optical refrigerating technology. It includes recent results on laser cooling by redistribution of radiation in dense gas mixtures, three conceptually different approaches to laser cooling of solids such as cooling with anti-Stokes fluorescence, Brillouin cooling, and Raman cooling. It also discusses crystal growth and glass production for laser cooling applications. This book will appeal to anyone involved in laser physics, solid-state physics, low-temperature physics or cryogenics, materials research, development of temperature sensors, or infrared detectors.

Download or read book High Energy and Short Pulse Lasers written by Richard Viskup and published by BoD – Books on Demand. This book was released on 2016-09-07 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the readers an introduction to experimental and theoretical knowledge acquired by large-scale laser laboratories that are dealing with extra-high peak power and ultrashort laser pulses for research of terawatt (TW), petawatt (PW), or near-future exawatt (EW) laser interactions, for soft X-ray sources, for acceleration of particles, or for generation of hot dense thermal plasma for the laser fusion. The other part of this book is dealing with the small-scale laser laboratories that are using for its research on commercial sources of laser radiation, nanosecond (ns), picosecond (ps), or femtosecond (fs) laser pulses, either for basic research or for more advanced applications. This book is divided into six main sections dealing with short and ultrashort laser pulses, laser-produced soft X-ray sources, large-scale high-power laser systems, free-electron lasers, fiber-based sources of short optical pulse, and applications of short pulse lasers. In each chapter readers can find fascinating topics related to the high energy and/or short pulse laser technique. Individual chapters should serve the broad spectrum of readers of different expertise, layman, undergraduate and postgraduate students, scientists, and engineers, who may in this book find easily explained fundamentals as well as advanced principles of particular subjects related to these phenomena.

Download or read book Frontiers in Guided Wave Optics and Optoelectronics written by Bishnu Pal and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the editor, I feel extremely happy to present to the readers such a rich collection of chapters authored/co-authored by a large number of experts from around the world covering the broad field of guided wave optics and optoelectronics. Most of the chapters are state-of-the-art on respective topics or areas that are emerging. Several authors narrated technological challenges in a lucid manner, which was possible because of individual expertise of the authors in their own subject specialties. I have no doubt that this book will be useful to graduate students, teachers, researchers, and practicing engineers and technologists and that they would love to have it on their book shelves for ready reference at any time.

Download or read book Lasers and Nuclei written by Heinrich Schwoerer and published by Springer Science & Business Media. This book was released on 2006-05-22 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers and Nuclei describes the generation of high-energy-particle radiation with high-intensity lasers and its application to nuclear science. A basic introduction to laser--matter interaction at high fields is complemented by detailed presentations of state of the art laser particle acceleration and elementary laser nuclear experiments. The text also discusses future applications of lasers in nuclear science, for example in nuclear astrophysics, isotope generation, nuclear fuel physics and proton and neutron imaging.