Download or read book Heterostructures on Silicon One Step Further with Silicon written by Y. Nissim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of logic circuits in microelectronics, the leadership of silicon is now strongly established due to the achievement of its technology. Near unity yield of one million transistor chips on very large wafers (6 inches today, 8 inches tomorrow) are currently accomplished in industry. The superiority of silicon over other material can be summarized as follow: - The Si/Si0 interface is the most perfect passivating interface ever 2 obtained (less than 10" e y-I cm2 interface state density) - Silicon has a large thermal conductivity so that large crystals can be pulled. - Silicon is a hard material so that large wafers can be handled safely. - Silicon is thermally stable up to 1100°C so that numerous metallurgical operations (oxydation, diffusion, annealing ... ) can be achieved safely. - There is profusion of silicon on earth so that the base silicon wafer is cheap. Unfortunatly, there are fundamental limits that cannot be overcome in silicon due to material properties: laser action, infra-red detection, high mobility for instance. The development of new technologies of deposition and growth has opened new possibilities for silicon based structures. The well known properties of silicon can now be extended and properly used in mixed structures for areas such as opto-electronics, high-speed devices. This has been pioneered by the integration of a GaAs light emitting diode on a silicon based structure by an MIT group in 1985.

Download or read book Condensed Systems of Low Dimensionality written by J.L. Beeby and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Special Programme Panel on Condensed Systems of Low Dimensionality began its work in 1985 at a time of considerable activity in the field. The Panel has since funded many Advanced Research Workshops, Advanced Study Institutes, Cooperative Research Grants and Research Visits across the breadth of its remit, which stretches from self-organizing organic molecules to semiconductor structures having two, one and zero dimensions. The funded activities, especially the workshops, have allowed researchers from within NATO countries to exchange ideas and work together at a period of development of the field when such interactions are most valuable. Such timely support has undoubtedly assisted the development of national programs, particularly in the countries of the alliance wishing to strengthen their science base. A closing Workshop to mark the end of the Panel's activities was organized in Marmaris, Turkey from April 23-27, 1990, with the same title as the Panel: Condensed systems of Low Dimensionality. This volume contains papers presented at that meeting, which sought to bring together chemists, physicists and engineers from across the spectrum of the Panel's activities to discuss topics of current interest in their special fields and to exchange ideas about the effects of low dimensionality. As the following pages show, this is a topic of extraordinary interest and challenge which produces entirely new scientific phenomena, and at the same time offers the possibility of novel technological applications.

Download or read book Defect Control in Semiconductors written by K. Sumino and published by Elsevier. This book was released on 2012-12-02 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect control in semiconductors is a key technology for realizing the ultimate possibilities of modern electronics. The basis of such control lies in an integrated knowledge of a variety of defect properties. From this viewpoint, the volume discusses defect-related problems in connection with defect control in semiconducting materials, such as silicon, III-V, II-VI compounds, organic semiconductors, heterostructure, etc.The conference brought together scientists in the field of fundamental research and engineers involved in application related to electronic devices in order to promote future research activity in both fields and establish a fundamental knowledge of defect control. The main emphasis of the 254 papers presented in this volume is on the control of the concentration, distribution, structural and electronic states of any types of defects including impurities as well as control of the electrical, optical and other activities of defects. Due to the extensive length of the contents, only the number of papers presented per session is listed below.

Download or read book Silicon Molecular Beam Epitaxy written by Erwin Kasper and published by Elsevier. This book was released on 2012-12-02 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume work covers recent developments in the single crystal growth, by molecular beam epitaxy, of materials compatible with silicon, their physical characterization, and device application. Papers are included on surface physics and related vacuum synthesis techniques such as solid phase epitaxy and ion beam epitaxy.A selection of contents: Volume I. SiGe Superlattices. SiGe strained layer superlattices (G. Abstreiter). Optical properties of strained GeSi superlattices grown on (001)Ge (T.P. Pearsall et al.). Growth and characterization of SiGe atomic layer superlattices (J.-M. Baribeau et al.). Optical properties of perfect and imperfect SiGe superlattices (K.B. Wong et al.). Confined phonons in stained short-period (001) Si/Ge superlattices (W. Bacsa et al.). Calculation of energies and Raman intensities of confined phonons in SiGe strained layer superlattices (J. White et al.). Rippled surface topography observed on silicon molecular beam epitaxial and vapour phase epitaxial layers (A.J. Pidduck et al.). The 698 meV optical band in MBE silicon (N. de Mello et al.). Silicon Growth Doping. Dopant incorporation kinetics and abrupt profiles during silicon molecular beam epitaxy (J.-E. Sundgren et al.). Influence of substrate orientation on surface segregation process in silicon-MBE (K. Nakagawa et al.). Growth and transport properties of SimSb1 (H. Jorke, H. Kibbel). Author Index. Volume. II. In-situ electron microscope studies of lattice mismatch relaxation in GexSi1-x/Si heterostructures (R. Hull et al.). Heterogeneous nucleation sources in molecular beam epitaxy-grown GexSi1-x/Si strained layer superlattices (D.D. Perovic et al.). Silicon Growth. Hydrogen-terminated silicon substrates for low-temperature molecular beam epitaxy (P.J. Grunthaner et al.). Interaction of structure with kinetics in Si(001) homoepitaxy (S. Clarke et al.). Surface step structure of a lens-shaped Si(001) vicinal substrate (K. Sakamoto et al.). Photoluminescence characterization of molecular beam epitaxial silicon (E.C. Lightowlers et al.). Doping. Boron doping using compound source (T. Tatsumi). P-type delta doping in silicon MBE (N.L. Mattey et al.). Modulation-doped superlattices with delta layers in silicon (H.P. Zeindell et al.). Steep doping profiles obtained by low-energy implantation of arsenic in silicon MBE layers (N. Djebbar et al.). Alternative Growth Methods. Limited reaction processing: growth of Si/Si1-xGex for heterojunction bipolar transistor applications (J.L. Hoyt et al.). High gain SiGe heterojunction bipolar transistors grown by rapid thermal chemical vapor deposition (M.L. Green et al.). Epitaxial growth of single-crystalline Si1-xGex on Si(100) by ion beam sputter deposition (F. Meyer et al.). Phosphorus gas doping in gas source silicon-MBE (H. Hirayama, T. Tatsumi). Devices. Narrow band gap base heterojunction bipolar transistors using SiGe alloys (S.S. Iyer et al.). Silicon-based millimeter-wave integrated circuits (J-F. Luy). Performance and processing line integration of a silicon molecular beam epitaxy system (A.A. van Gorkum et al.). Silicides. Reflection high energy electron diffraction study of Cosi2/Si multilayer structures (Q. Ye at al.). Epitaxy of metal silicides (H. von Kanel et al.). Epitaxial growth of ErSi2 on (111)si (D. Loretto et al.). Other Material Systems. Oxygen-doped and nitrogen-doped silicon films prepared by molecular beam epitaxy (M. Tabe et al.). Properties of diamond structure SnGe films grown by molecular beam epitaxy (A. Harwit et al.). Si-MBE: Prospects and Challenges. Prospects and challenges for molecular beam epitaxy in silicon very-large-scale integration (W. Eccleston). Prospects and challenges for SiGe strained-layer epitaxy (T.P. Pearsall). Author Index.

Download or read book Encyclopedia of Chemical Processing and Design written by John J. McKetta Jr and published by CRC Press. This book was released on 1994-11-21 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Written by engineers for engineers (with over 150 International Editorial Advisory Board members),this highly lauded resource provides up-to-the-minute information on the chemical processes, methods, practices, products, and standards in the chemical, and related, industries. "

Download or read book Handbook of Compound Semiconductors written by Paul H. Holloway and published by Cambridge University Press. This book was released on 2008-10-19 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the recent advances and current technologies used to produce microelectronic and optoelectronic devices from compound semiconductors. It provides a complete overview of the technologies necessary to grow bulk single-crystal substrates, grow hetero-or homoepitaxial films, and process advanced devices such as HBT's, QW diode lasers, etc.

Download or read book Spectroscopy of Semiconductor Microstructures written by Gerhard Fasol and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a NATO ARW held in Venice, Italy, May 9-13, 1989

Download or read book Physics and Technology of Amorphous Crystalline Heterostructure Silicon Solar Cells written by Wilfried G. J. H. M. van Sark and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s solar cell multi-GW market is dominated by crystalline silicon (c-Si) wafer technology, however new cell concepts are entering the market. One very promising solar cell design to answer these needs is the silicon hetero-junction solar cell, of which the emitter and back surface field are basically produced by a low temperature growth of ultra-thin layers of amorphous silicon. In this design, amorphous silicon (a-Si:H) constitutes both „emitter“ and „base-contact/back surface field“ on both sides of a thin crystalline silicon wafer-base (c-Si) where the electrons and holes are photogenerated; at the same time, a-Si:H passivates the c-Si surface. Recently, cell efficiencies above 23% have been demonstrated for such solar cells. In this book, the editors present an overview of the state-of-the-art in physics and technology of amorphous-crystalline heterostructure silicon solar cells. The heterojunction concept is introduced, processes and resulting properties of the materials used in the cell and their heterointerfaces are discussed and characterization techniques and simulation tools are presented.

Download or read book Wide band gap Semiconductors written by C.G. Van de Walle and published by Elsevier. This book was released on 2012-12-02 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide-band-gap semiconductors have been a research topic for many decades. However, it is only in recent years that the promise for technological applications came to be realized; simultaneously an upsurge of experimental and theoretical activity in the field has been witnessed. Semiconductors with wide band gaps exhibit unique electronic and optical properties. Their low intrinsic carrier concentrations and high breakdown voltage allow high-temperature and high-power applications (diamond, SiC etc.). The short wavelength of band-to-band transitions allows emission in the green, blue, or even UV region of the spectrum (ZnSe, GaN, etc.). In addition, many of these materials have favorable mechanical and thermal characteristics. These proceedings reflect the exciting progress made in this field. Successful p-type doping of ZnSe has recently led to the fabrication of blue-green injection lasers in ZnSe; applications of short-wavelength light-emitting devices range from color displays to optical storage. In SiC, advances in growth techniques for bulk as well as epitaxial material have made the commercial production of high-temperature and high-frequency devices possible. For GaN, refinement of growth procedures and new ways of obtaining doped material have resulted in blue-light-emitting diodes and opened the road to the development of laser diodes. Finally, while the quality of artificial diamond is not yet high enough for electronic applications, the promise it holds in terms of unique material properties is encouraging intense activity in the field. This volume contains contributions from recognized experts presently working on different material systems in the field. The papers cover the theoretical, experimental and application-oriented aspects of this exciting topic.

Download or read book High Tc Superconducting Technology written by Muralidhar Miryala and published by CRC Press. This book was released on 2021-11-24 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitigating climate change, clean environment, global peace, financial growth, and future development of the world require new materials that improve the quality of life. Superconductivity, in general, allows perfect current transmission without losses. This makes it a valuable resource for sustainability in several aspects. High-temperature superconducting (HTSC) materials will be crucial for sustainable everyday applications and more attractive for the United Nations’ SDGs. Superconducting magnets can be used as high-field magnets in magnetic resonance imaging, nuclear magnetic resonance, water purification, magnetic drug delivery, etc. Hunger can be partly avoided if there is sustainability in agriculture. In the future, DC electric energy from solar plants in Africa could be transported worldwide, especially to cold countries, using superconducting cables. Superconducting technology is an efficient way to create sustainability as well as reduce greenhouse gases. This book presents the latest global achievements in the processing and applications of high-Tc superconductors and discusses the usefulness of the SDGs. It summarizes the related advances in materials science and developments with respect to the SDGs. The book also covers large-scale applications of HTSC materials, which will be connected to the SDGs, addressed by several eminent scientists, including Prof. M. Murakami, president, Shibaura Institute of Technology, Japan; Prof. D. Cardwell, pro-vice chancellor, University of Cambridge, UK; and Prof. N. Long, director, Victoria University of Wellington, New Zealand.

Download or read book Science of Ceramic Interfaces II written by J. Nowotny and published by Newnes. This book was released on 1995-01-13 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers arose from the Proceedings of the International Workshop on Interfaces of Ceramic Materials held in Australia, 1993 and is a continuation of the previous book published under the same title. The objective of the Workshop was to discuss research progress on the chemistry of ceramic interfaces and related industrial aspects. Due to the multidisciplinary character of ceramic interfaces the book contains articles covering several areas of expertise, including ceramics, surface science, solid state electrochemistry, metallurgy and high temperature chemistry. Some technical papers are also included in this volume. Scientists and engineers working in these areas, as well as students in materials science and engineering, will find this book of particular significance.

Download or read book Crystal Growth For Beginners Fundamentals Of Nucleation Crystal Growth And Epitaxy Third Edition written by Markov Ivan Vesselinov and published by World Scientific. This book was released on 2016-12-29 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processes of new phase formation and growth are of fundamental importance in numerous rapidly developing scientific fields such as modern materials science, micro- and optoelectronics, and environmental science. Crystal Growth for Beginners combines the depth of information in monographs, with the thorough analysis of review papers, and presents the resulting content at a level understandable by beginners in science. The book covers, in practice, all fundamental questions and aspects of nucleation, crystal growth, and epitaxy. This book is a non-eclectic presentation of this interdisciplinary topic in materials science. The third edition brings existing chapters up to date, and includes new chapters on the growth of nanowires by the vapor–liquid–solid mechanism, as well as illustrated short biographical texts about the scientists who introduced the basic ideas and concepts into the fields of nucleation, crystal growth and epitaxy. All formulae and equations are illustrated by examples that are of technological importance. The book presents not only the fundamentals but also the state of the art in the subject. Crystal Growth for Beginners is a valuable reference for both graduate students and researchers in materials science. The reader is required to possess some basic knowledge of mathematics, physics and thermodynamics.

Download or read book Crystal Growth for Beginners written by Ivan V Markov and published by World Scientific. This book was released on 2003-08-12 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first-ever textbook on the fundamentals of nucleation, crystal growth and epitaxy. It has been written from a unified point of view and is thus a non-eclectic presentation of this interdisciplinary topic in materials science. The reader is required to possess some basic knowledge of mathematics and physics. All formulae and equations are accompanied by examples that are of technological importance. The book presents not only the fundamentals but also the state of the art in the subject. The second revised edition includes two separate chapters dealing with the effect of the Ehrlich-Schwoebel barrier for down-step diffusion, as well as the effect of surface active species, on the morphology of the growing surfaces. In addition, many other chapters are updated accordingly. Thus, it serves as a valuable reference book for both graduate students and researchers in materials science. Contents:Crystal — Ambient Phase EquilibriumNucleationCrystal GrowthEpitaxial Growth Readership: Graduate students, academics and researchers in materials engineering, microelectronics, new materials, semiconductors and related areas. Keywords:Nucleation;Epitaxy;Crystal Surfaces;Surface Structure;Crystal Growth;Misfit Dislocations;Thin Solid Films;Wetting;Surface Diffusion;Silicon

Download or read book Semiconductors and Semimetals written by and published by Academic Press. This book was released on 1993-06-07 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors and Semimetals

Download or read book GeSi Strained Layers and Their Applications A Reprint Volume written by A. M. Stoneham and published by CRC Press. This book was released on 1995 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents key papers published in recent years dealing with silicon-germanium strained layers and their applications.Papers are presented in three groups, dealing with growth and mechanical properties of strained layers, electronic and optical properties, and applications, notably in novel diode and transistor designs and high performance optical detectors. The collected papers will be an ideal source for new researchers who need quick and easy access to an authoritative selection of high quality papers. An important aspect of the selection is the cross-disciplinary nature of the papers, presenting material from electronic engineers as well as from physicists and materials scientists. An extensive bibliography gives details of a further 250 papers on the subject.

Download or read book Electrodynamics of Solids and Microwave Superconductivity written by Shu-Ang Zhou and published by John Wiley & Sons. This book was released on 1999-07-23 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the interdisciplinary field of solid electrodynamics and its applications in superconductor and microwave technologies. It gives scientists and engineers the foundation necessary to deal with theoretical and applied electromagnetics, continuum mechanics, applied superconductivity, high-speed electronic circuit design, microwave engineering and transducer technology.

Download or read book Surface Processing and Laser Assisted Chemistry written by E. Fogarassy and published by Elsevier. This book was released on 1990-12-01 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume cover all aspects of laser assisted surface processing ranging from the preparation of high-Tc superconducting layer structures to industrial laser applications for device fabrication. The topics presented give recent results in organometallic chemistry and laser photochemistry, and novel surface characterization techniques. The ability to control the surface morphology by digital deposition and etching shows one of the future directions for exciting applications of laser surface processing, some of which may apply UV and VUV excitation. The understanding of elementary proceses is essential for the design of novel deposition methods, with diamond CVD being an outstanding example. The high quality of these contributions once again demonstrates that the E-MRS is an efficient forum for interaction between research workers and industry.