Download or read book Heterogeneity in Distributed Embedded Systems written by Tobias Baumgartner and published by . This book was released on 2012 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Technology for Heterogeneous Embedded Systems written by Gabriela Nicolescu and published by Springer Science & Business Media. This book was released on 2012-02-02 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design technology to address the new and vast problem of heterogeneous embedded systems design while remaining compatible with standard “More Moore” flows, i.e. capable of simultaneously handling both silicon complexity and system complexity, represents one of the most important challenges facing the semiconductor industry today and will be for several years to come. While the micro-electronics industry, over the years and with its spectacular and unique evolution, has built its own specific design methods to focus mainly on the management of complexity through the establishment of abstraction levels, the emergence of device heterogeneity requires new approaches enabling the satisfactory design of physically heterogeneous embedded systems for the widespread deployment of such systems. Heterogeneous Embedded Systems, compiled largely from a set of contributions from participants of past editions of the Winter School on Heterogeneous Embedded Systems Design Technology (FETCH), proposes a necessarily broad and holistic overview of design techniques used to tackle the various facets of heterogeneity in terms of technology and opportunities at the physical level, signal representations and different abstraction levels, architectures and components based on hardware and software, in all the main phases of design (modeling, validation with multiple models of computation, synthesis and optimization). It concentrates on the specific issues at the interfaces, and is divided into two main parts. The first part examines mainly theoretical issues and focuses on the modeling, validation and design techniques themselves. The second part illustrates the use of these methods in various design contexts at the forefront of new technology and architectural developments.

Download or read book Electronic System Level HW SW Co Design of Heterogeneous Multi Processor Embedded Systems written by Luigi Pomante and published by River Publishers. This book was released on 2016-06-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern electronic systems consist of a fairly heterogeneous set of components. Today, a single system can be constituted by a hardware platform, frequently composed of a mix of analog and digital components, and by several software application layers. The hardware can include several heterogeneous microprocessors (e.g. GPP, DSP, GPU, etc.), dedicated ICs (ASICs and/or FPGAs), memories, a set of local connections between the system components, and some interfaces between the system and the environment (sensors, actuators, etc.). Therefore, on the one hand, multi-processor embedded systems are capable of meeting the demand of processing power and flexibility of complex applications. On the other hand, such systems are very complex to design and optimize, so that the design methodology plays a major role in determining the success of the products. For these reasons, to cope with the increasing system complexity, the approaches typically used today are oriented towards co-design methodologies working at the higher levels of abstraction. Unfortunately, such methodologies are typically customized for the specific application, suffer of a lack of generality and still need a considerable effort when real-size project are envisioned. Therefore, there is still the need for a general methodology able to support the designer during the high-level steps of a co-design flow, enabling an effective design space exploration before tackling the low-level steps and thus committing to the final technology. This should prevent costly redesign loops. In such a context, the work described in this book, composed of two parts, aims at providing models, methodologies and tools to support each step of the co-design flow of embedded systems implemented by exploiting heterogeneous multi-processor architectures mapped on distributed systems, as well as fully integrated onto a single chip. The first part focuses on issues like the analysis of system specification languages, and the analysis of existing system-level HW/SW co-simulation methodologies to support heterogeneous multi-processor architectures. The second part focuses mainly on Design Space Exploration, and it presents both some theoretical advancements with respect to the first part, and the development of a prototypal framework that provides practical exploitation of the proposed concepts.

Download or read book Hardware software Co design of Heterogeneous Real time Distributed Embedded Systems written by Bharat Purushottam Dave and published by . This book was released on 1998 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis and Synthesis of Distributed Real Time Embedded Systems written by Paul Pop and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded computer systems are now everywhere: from alarm clocks to PDAs, from mobile phones to cars, almost all the devices we use are controlled by embedded computers. An important class of embedded computer systems is that of hard real-time systems, which have to fulfill strict timing requirements. As real-time systems become more complex, they are often implemented using distributed heterogeneous architectures. Analysis and Synthesis of Distributed Real-Time Embedded Systems addresses the design of real-time applications implemented using distributed heterogeneous architectures. The systems are heterogeneous not only in terms of hardware components, but also in terms of communication protocols and scheduling policies. Regarding this last aspect, time-driven and event-driven systems, as well as a combination of the two, are considered. Such systems are used in many application areas like automotive electronics, real-time multimedia, avionics, medical equipment, and factory systems. The proposed analysis and synthesis techniques derive optimized implementations that fulfill the imposed design constraints. An important part of the implementation process is the synthesis of the communication infrastructure, which has a significant impact on the overall system performance and cost. Analysis and Synthesis of Distributed Real-Time Embedded Systems considers the mapping and scheduling tasks within an incremental design process. To reduce the time-to-market of products, the design of real-time systems seldom starts from scratch. Typically, designers start from an already existing system, running certain applications, and the design problem is to implement new functionality on top of this system. Supporting such an incremental design process provides a high degree of flexibility, and can result in important reductions of design costs. STRONGAnalysis and Synthesis of Distributed Real-Time Embedded Systems will be of interest to advanced undergraduates, graduate students, researchers and designers involved in the field of embedded systems.

Download or read book Analysis and Optimisation of Distributed Embedded Systems with Heterogeneous Scheduling Policies written by Traian Pop and published by . This book was released on 2007 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Optimization of Parallel and Distributed Embedded Systems written by Arslan Munir and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the state-of-the-art in research in parallel and distributed embedded systems, which have been enabled by developments in silicon technology, micro-electro-mechanical systems (MEMS), wireless communications, computer networking, and digital electronics. These systems have diverse applications in domains including military and defense, medical, automotive, and unmanned autonomous vehicles. The emphasis of the book is on the modeling and optimization of emerging parallel and distributed embedded systems in relation to the three key design metrics of performance, power and dependability. Key features: Includes an embedded wireless sensor networks case study to help illustrate the modeling and optimization of distributed embedded systems. Provides an analysis of multi-core/many-core based embedded systems to explain the modeling and optimization of parallel embedded systems. Features an application metrics estimation model; Markov modeling for fault tolerance and analysis; and queueing theoretic modeling for performance evaluation. Discusses optimization approaches for distributed wireless sensor networks; high-performance and energy-efficient techniques at the architecture, middleware and software levels for parallel multicore-based embedded systems; and dynamic optimization methodologies. Highlights research challenges and future research directions. The book is primarily aimed at researchers in embedded systems; however, it will also serve as an invaluable reference to senior undergraduate and graduate students with an interest in embedded systems research.

Download or read book Distributed and Parallel Embedded Systems written by Franz J. Rammig and published by Springer. This book was released on 2013-03-09 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are becoming one of the major driving forces in computer science. Furthermore, it is the impact of embedded information technology that dictates the pace in most engineering domains. Nearly all technical products above a certain level of complexity are not only controlled but increasingly even dominated by their embedded computer systems. Traditionally, such embedded control systems have been implemented in a monolithic, centralized way. Recently, distributed solutions are gaining increasing importance. In this approach, the control task is carried out by a number of controllers distributed over the entire system and connected by some interconnect network, like fieldbuses. Such a distributed embedded system may consist of a few controllers up to several hundred, as in today's top-range automobiles. Distribution and parallelism in embedded systems design increase the engineering challenges and require new development methods and tools. This book is the result of the International Workshop on Distributed and Parallel Embedded Systems (DIPES'98), organized by the International Federation for Information Processing (IFIP) Working Groups 10.3 (Concurrent Systems) and 10.5 (Design and Engineering of Electronic Systems). The workshop took place in October 1998 in Schloss Eringerfeld, near Paderborn, Germany, and the resulting book reflects the most recent points of view of experts from Brazil, Finland, France, Germany, Italy, Portugal, and the USA. The book is organized in six chapters: `Formalisms for Embedded System Design': IP-based system design and various approaches to multi-language formalisms. `Synthesis from Synchronous/Asynchronous Specification': Synthesis techniques based on Message Sequence Charts (MSC), StateCharts, and Predicate/Transition Nets. `Partitioning and Load-Balancing': Application in simulation models and target systems. `Verification and Validation': Formal techniques for precise verification and more pragmatic approaches to validation. `Design Environments' for distributed embedded systems and their impact on the industrial state of the art. `Object Oriented Approaches': Impact of OO-techniques on distributed embedded systems. £/LIST£ This volume will be essential reading for computer science researchers and application developers.

Download or read book Perspectives of Systems Informatics written by Amir Pnueli and published by Springer. This book was released on 2010-01-27 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the ?nal proceedings of the 7th International Andrei Ershov Memorial Conference on Perspectives of System Informatics Akad- gorodok (Novosibirsk, Russia), June 15–19, 2009. PSI is a forum for academic and industrial researchers, developers and users working on topics relating to computer, software and information sciences. The conference serves to bridge the gaps between di?erent communities whose - searchareasarecoveredbybutnotlimitedtofoundationsofprogramandsystem development and analysis, programming methodology and softwareengineering, and information technologies. PSI 2009 was dedicated to the memory of a prominent scientist, academician Andrei Ershov (1931–1988),and to a signi?cant date in the history of computer science in the country, namely, the 50th anniversary of the Programming - partment founded by Andrei Ershov. Initially, the department was a part of the Institute of Mathematics and later, in 1964, it joined the newly established Computing Center of the Siberian Branch of the USSR Academy of Sciences. Andrei Ershov, who was responsible for forming the department, gathered a team of young graduates from leading Soviet universities. The ?rst signi?cant project of the department was aimed at the development of ALPHA system, an optimizing compiler for an extension of Algol 60 implemented on a Soviet c- puterM-20. Later,theresearchersofthedepartmentcreatedtheAlgibr,Epsilon, Sigma, and Alpha-6 programming systems for the BESM-6 computers. The list of their achievements also includes the ?rst Soviet time-sharing system AIST-0, the multi-language system BETA, research projects in arti?cial intelligence and parallel programming, integrated tools for text processing and publishing, and many others.

Download or read book Heterogeneous Memory Organizations in Embedded Systems written by Miguel Peón Quirós and published by Springer Nature. This book was released on 2020-01-30 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book defines and explores the problem of placing the instances of dynamic data types on the components of the heterogeneous memory organization of an embedded system, with the final goal of reducing energy consumption and improving performance. It is one of the first to cover the problem of placement for dynamic data objects on embedded systems with heterogeneous memory architectures, presenting a complete methodology that can be easily adapted to real cases and work flows. The authors discuss how to improve system performance and energy consumption simultaneously. Discusses the problem of placement for dynamic data objects on embedded systems with heterogeneous memory architectures; Presents a complete methodology that can be adapted easily to real cases and work flows; Offers hints on how to improve system performance and energy consumption simultaneously.

Download or read book Scheduling Parallel Applications on Heterogeneous Distributed Systems written by Guoqi Xie and published by Springer. This book was released on 2019-08-06 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on scheduling algorithms for parallel applications on heterogeneous distributed systems, and addresses key scheduling requirements – high performance, low energy consumption, real time, and high reliability – from the perspectives of both theory and engineering practice. Further, it examines two typical application cases in automotive cyber-physical systems and cloud systems in detail, and discusses scheduling challenges in connection with resource costs, reliability and low energy. The book offers a comprehensive and systematic treatment of high-performance, low energy consumption, and high reliability issues on heterogeneous distributed systems, making it a particularly valuable resource for researchers, engineers and graduate students in the fields of computer science and engineering, information science and engineering, and automotive engineering, etc. The wealth of motivational examples with figures and tables make it easy to understand.

Download or read book Design and Analysis of Distributed Embedded Systems written by Bernd Kleinjohann and published by Springer. This book was released on 2013-04-17 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Analysis of Distributed Embedded Systems is organized similar to the conference. Chapters 1 and 2 deal with specification methods and their analysis while Chapter 6 concentrates on timing and performance analysis. Chapter 3 describes approaches to system verification at different levels of abstraction. Chapter 4 deals with fault tolerance and detection. Middleware and software reuse aspects are treated in Chapter 5. Chapters 7 and 8 concentrate on the distribution related topics such as partitioning, scheduling and communication. The book closes with a chapter on design methods and frameworks.

Download or read book Architecture and Design of Distributed Embedded Systems written by Bernd Kleinjohann and published by . This book was released on 2014-01-15 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book System on Chip written by Bashir M. Al-Hashimi and published by IET. This book was released on 2006-01-31 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights both the key achievements of electronic systems design targeting SoC implementation style, and the future challenges presented by the continuing scaling of CMOS technology.

Download or read book Global Specification and Validation of Embedded Systems written by G. Nicolescu and published by Springer Science & Business Media. This book was released on 2007-07-07 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers up a deep understanding of concepts and practices behind the composition of heterogeneous components. After the analysis of existing computation and execution models used for the specification and validation of different sub-systems, the book introduces a systematic approach to build an execution model for systems composed of heterogeneous components. Mixed continuous/discrete and hardware/software systems are used to illustrate these concepts. The benefit of reading this book is to arrive at a clear vision of the theory and practice of specification and validation of complex modern systems. Numerous examples give designers highly applicable solutions.

Download or read book Distributed Embedded and Real time Java Systems written by M. Teresa Higuera-Toledano and published by Springer Science & Business Media. This book was released on 2012-02-07 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on real-time Java technology has been prolific over the past decade, leading to a large number of corresponding hardware and software solutions, and frameworks for distributed and embedded real-time Java systems. This book is aimed primarily at researchers in real-time embedded systems, particularly those who wish to understand the current state of the art in using Java in this domain. Much of the work in real-time distributed, embedded and real-time Java has focused on the Real-time Specification for Java (RTSJ) as the underlying base technology, and consequently many of the Chapters in this book address issues with, or solve problems using, this framework. Describes innovative techniques in: scheduling, memory management, quality of service and communication systems supporting real-time Java applications; Includes coverage of multiprocessor embedded systems and parallel programming; Discusses state-of-the-art resource management for embedded systems, including Java’s real-time garbage collection and parallel collectors; Considers hardware support for the execution of Java programs including how programs can interact with functional accelerators; Includes coverage of Safety Critical Java for development of safety critical embedded systems.

Download or read book Job Scheduling Strategies for Parallel Processing written by Narayan Desai and published by Springer. This book was released on 2017-07-11 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 19th and 20th International Workshop on Job Scheduling Strategies for Parallel Processing, JSSPP 2015 and 2016, held respectively in Hyderabad, India, on May 26, 2015 and in Chicago, IL, USA, on May 27, 2016. The 14 revised full papers presented (7 papers in 2015 and 7 papers in 2016) were carefully reviewed and selected from 28 submissions (14 in 2015 and 14 in 2016). The papers cover the following topics: parallel scheduling raising challenges multiple levels of abstractions; node level parallelism; minimization of energy consumption in task migration within a many-core chip; task replication in real-time scheduling context; data-driven approach to schedule GPU load; the use of lock-free data structures in OS scheduler; the influence between user behaviour (think time, more precisely) and parallel scheduling; Evalix, a predictor for job resource consumption; sophisticated and realistic simulation; space-filling curves leading to better scheduling of large-scale computers; discussion of real-life production experiences.