Download or read book The Aerodynamics of Heavy Vehicles Trucks Buses and Trains written by Rose McCallen and published by Springer Science & Business Media. This book was released on 2013-07-30 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our pleasure to present these proceedings from the United Engineering Foundation Conference on The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains held December 2-6, 2002, in Monterey, California. This Department of Energy, United Engineering Foundation, and industry sponsored conference brought together 90 leading engineering researchers from around the world to discuss the aerodynamic drag of heavy vehicles. Participants from national labs, academia, and industry, including truck manufacturers, discussed how computer simulation and experimental techniques could be used to design more fuel efficient trucks, buses, and trains. Conference topics included comparison of computational fluid dynamics calculations using both steady and unsteady Reynolds-averaged Navier-Stokes, large-eddy simulation, and hybrid turbulence models and experimental data obtained from the Department of Energy sponsored and other wind tunnel experiments. Advanced experimental techniques including three-dimensional particle image velocimetry were presented, along with their use in evaluating drag reduction devices. We would like to thank the UEF conference organizers for their dedication and quick response to sudden deadlines. In addition, we would like to thank all session chairs, the scientific advisory committee, authors, and reviewers for their many hours of dedicated effort that contributed to a successful conference and resulted in this document of the conference proceedings. We also gratefully acknowledge the support received from the United Engineering Foundation, the US Department of Energy, Lawrence Livermore National Laboratory, Volvo Trucks America, International Truck and Engine Corporation, and Freightliner LLC.

Download or read book Simulators for Transportation Human Factors written by Mark S. Young and published by CRC Press. This book was released on 2017-07-06 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation continues to be a growth area in transportation human factors. From empirical studies in the laboratory to the latest training techniques in the field, simulators offer myriad benefits for the experimenter and the practitioner. This book draws together current trends in research and training simulators for the road, rail, air and sea sectors to inform the reader how to maximize both validity and cost-effectiveness in each case. Simulators for Transportation Human Factors provides a valuable resource for both researchers and practitioners in transportation human factors on the use of simulators, giving readers concrete examples and case studies of how simulators have been developed and used in empirical research as well as training applications. It offers useful and usable information on the functional requirements of simulators without the need for any background knowledge on the technical aspects, focusing on the state of the art of research and applications in transport simulators rather than the state of the art of simulation technology. The book covers simulators in operational terms instead of task simulation/modelling and provides a useful balance between a bottom-up, academic approach and a top-down, practical perspective.

Download or read book Road Simulator Study of Heavy vehicle Wheel Forces written by Donald A. Streit and published by . This book was released on 1998 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of the study was to investigate the effects of vehicle and road characteristics on dynamic forces applied by heavy vehicles on pavement. The work conducted under this contract can be divided into three major areas: (1) development of equipment necessary for the testing program, (2) performance of the tests, and (3) analysis of the test results. The three main pieces of equipment used in this study were a road simulator, a two-axle truck, and a wheel force transducer.

Download or read book Simulation and Testing for Vehicle Technology written by Clemens Gühmann and published by Springer. This book was released on 2016-05-17 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes contributions on the latest model-based methods for the development of personal and commercial vehicle control devices. The main topics treated are: application of simulation and model design to development of driver assistance systems; physical and database model design for engines, motors, powertrain, undercarriage and the whole vehicle; new simulation tools, methods and optimization processes; applications of simulation in function and software development; function and software testing using HiL, MiL and SiL simulation; application of simulation and optimization in application of control devices; automation approaches at all stages of the development process.

Download or read book Accelerated Pavement Testing to Transport Infrastructure Innovation written by Armelle Chabot and published by Springer Nature. This book was released on 2020-08-25 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations, and applications in the field of accelerated pavement testing (APT), presented at the 6th International Conference on Accelerated Pavement Testing, in Nantes, France, in April 2022. Discussing APT, which involves rapid testing of full-scale pavement constructions for structural deterioration, the book covers topics such as APT facilities, APT of asphalt concrete and sustainable/innovative materials, APT for airfield pavements, testing of maintenance and rehabilitation solutions, testing of smart and multi-functional pavements, data analysis and modeling, monitoring and non-destructive testing, and efficient means of calibrating/developing pavement design methods. Featuring peer-reviewed contributions by leading international researchers and engineers, the book is a timely and highly relevant resource for materials scientists and engineers interested in determining the performance of pavement structures during their service life (10+ years) in a few weeks or months.

Download or read book Vehicle Simulation written by Alfred T. Lee and published by CRC Press. This book was released on 2017-11-13 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the problem of fidelity in the design of virtual environments with specific reference to the design of vehicle simulators. The default design goal has been on the physical replication of a given real-world environment and, in the case of vehicles, the specific appearance and function of vehicle components. This book discusses that perceptual, rather than physical, fidelity of a virtual environment, should be the design goal and the principal purpose is to produce human behavior. This book provides the rationale and design guidance to maximize perceptual fidelity in the development of virtual environments, and therefore maximize the costeffectiveness as well.

Download or read book Autonomous and Connected Heavy Vehicle Technology written by Rajalakshmi Krishnamurthi and published by Elsevier. This book was released on 2022-01-24 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous and Connected Heavy Vehicle Technology presents the fundamentals, definitions, technologies, standards and future developments of autonomous and connected heavy vehicles. This book provides insights into various issues pertaining to heavy vehicle technology and helps users develop solutions towards autonomous, connected, cognitive solutions through the convergence of Big Data, IoT, cloud computing and cognition analysis. Various physical, cyber-physical and computational key points related to connected vehicles are covered, along with concepts such as edge computing, dynamic resource optimization, engineering process, methodology and future directions. The book also contains a wide range of case studies that help to identify research problems and an analysis of the issues and synthesis solutions. This essential resource for graduate-level students from different engineering disciplines such as automotive and mechanical engineering, computer science, data science and business analytics combines both basic concepts and advanced level content from technical experts. Covers state-of-the-art developments and research in vehicle sensor technology, vehicle communication technology, convergence with emerging technologies, and vehicle software and hardware integration Addresses challenges such as optimization, real-time control systems for distance and steering mechanism, and cognitive and predictive analysis Provides complete product development, commercial deployment, technological and performing costs and scaling needs

Download or read book The Aerodynamics of Heavy Vehicles III written by Andreas Dillmann and published by Springer. This book was released on 2015-08-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the International conference “The Aerodynamics of Heavy Vehicles III: Trucks, Buses and Trains” held in Potsdam, Germany, September 12-17, 2010 by Engineering Conferences International (ECI). Leading scientists and engineers from industry, universities and research laboratories, including truck and high-speed train manufacturers and operators were brought together to discuss computer simulation and experimental techniques to be applied for the design of more efficient trucks, buses and high-speed trains in the future. This conference was the third in the series after Monterey-Pacific Groove in 2002 and Lake Tahoe in 2007.The presentations address different aspects of train aerodynamics (cross wind effects, underbody flow, tunnel aerodynamics and aeroacoustics, experimental techniques), truck aerodynamics (drag reduction, flow control, experimental and computational techniques) as well as computational fluid dynamics and bluff body, wake and jet flows.

Download or read book Heavy Vehicle Safety Research a New Agenda for the 21st Century Prepared in Response to Senate Report 103 310 Senate Appropriations Committee H R 4556 Department of Transportation and Related Agencies Appropriations Bill 1995 written by and published by . This book was released on 1995 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Simulation of Heavy Haul Locomotives and Trains written by Maksym Spiryagin and published by CRC Press. This book was released on 2016-10-03 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increasing demands for safer freight trains operating with higher speed and higher loads, it is necessary to implement methods for controlling longer, heavier trains. This requires a full understanding of the factors that affect their dynamic performance. Simulation techniques allow proposed innovations to be optimised before introducing them into the operational railway environment. Coverage is given to the various types of locomotives used with heavy haul freight trains, along with the various possible configurations of those trains. This book serves as an introductory text for college students, and as a reference for engineers practicing in heavy haul rail network design,

Download or read book Design and Simulation of Rail Vehicles written by Maksym Spiryagin and published by CRC Press. This book was released on 2014-05-13 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Keep Up with Advancements in the Field of Rail Vehicle Design A thorough understanding of the issues that affect dynamic performance, as well as more inventive methods for controlling rail vehicle dynamics, is needed to meet the demands for safer rail vehicles with higher speed and loads. Design and Simulation of Rail Vehicles examines the field of rail vehicle design, maintenance, and modification, as well as performance issues related to these types of vehicles. This text analyzes rail vehicle design issues and dynamic responses, describes the design and features of rail vehicles, and introduces methods that address the operational conditions of this complex system. Progresses from Basic Concepts and Terminology to Detailed Explanations and Techniques Focused on both non-powered and powered rail vehicles—freight and passenger rolling stock, locomotives, and self-powered vehicles used for public transport—this book introduces the problems involved in designing and modeling all types of rail vehicles. It explores the applications of vehicle dynamics, train operations, and track infrastructure maintenance. It introduces the fundamentals of locomotive design, multibody dynamics, and longitudinal train dynamics, and discusses co-simulation techniques. It also highlights recent advances in rail vehicle design, and contains applicable standards and acceptance tests from around the world. • Includes multidisciplinary simulation approaches • Contains an understanding of rail vehicle design and simulation techniques • Establishes the connection between theory and many simulation examples • Presents simple to advanced rail vehicle design and simulation methodologies Design and Simulation of Rail Vehicles serves as an introductory text for graduate or senior undergraduate students, and as a reference for practicing engineers and researchers investigating performance issues related to these types of vehicles.

Download or read book Vehicle road Interaction written by Bohdan T. Kulakowski and published by ASTM International. This book was released on 1994 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a conference held in Santa Barbara, California, in May 1992. Topics include simulation and analysis of trucks using the program BAMMS, predicting vertical dynamic tire forces of heavy trucks, factors affecting the design and use of the Texas Mobile Load Simulator, traction tests on an

Download or read book Mathematical Modeling and Simulation of Systems written by Alexander Palagin and published by Springer. This book was released on 2019-07-17 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current investigations in the field of mathematical modeling and simulation to support the development of intelligent information systems in domains such as ecology and geology, manufacturing, project management, and safety of distributed information systems. The book will be of interest to developers of modern high-tech software complexes for situational control centers, based on mathematical modeling and simulation methods. In addition, it will appeal to software engineers and programmers, offering them new implementation and application methods. Gathering the latest research, prepared by leading scholars, and identifying promising new directions for solving complex scientific and practical problems, the book presents selected outcomes of the 14th International Scientific-Practical Conference, MODS2019, held in Chernihiv, Ukraine, on June 24 to 26, 2019.

Download or read book The Aerodynamics of Heavy Vehicles II Trucks Buses and Trains written by Fred Browand and published by Springer Science & Business Media. This book was released on 2008-09-30 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our pleasure to present these proceedings for “The Aerodynamics of Heavy Vehicles II: Trucks, Buses and Trains” International Conference held in Lake - hoe, California, August 26-31, 2007 by Engineering Conferences International (ECI). Brought together were the world’s leading scientists and engineers from industry, universities, and research laboratories, including truck and high-speed train manufacturers and operators. All were gathered to discuss computer simu- tion and experimental techniques to be applied for the design of the more efficient trucks, buses and high-speed trains required in future years. This was the second conference in the series. The focus of the first conference in 2002 was the interplay between computations and experiment in minimizing ae- dynamic drag. The present proceedings, from the 2007 conference, address the development and application of advanced aerodynamic simulation and experim- tal methods for state-of-the-art analysis and design, as well as the development of new ideas and trends holding promise for the coming 10-year time span. Also - cluded, are studies of heavy vehicle aerodynamic tractor and trailer add-on - vices, studies of schemes to delay undesirable flow separation, and studies of - derhood thermal management.

Download or read book Distributed Moving Base Driving Simulators written by Anders Andersson and published by Linköping University Electronic Press. This book was released on 2019-04-30 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of new functionality and smart systems for different types of vehicles is accelerating with the advent of new emerging technologies such as connected and autonomous vehicles. To ensure that these new systems and functions work as intended, flexible and credible evaluation tools are necessary. One example of this type of tool is a driving simulator, which can be used for testing new and existing vehicle concepts and driver support systems. When a driver in a driving simulator operates it in the same way as they would in actual traffic, you get a realistic evaluation of what you want to investigate. Two advantages of a driving simulator are (1.) that you can repeat the same situation several times over a short period of time, and (2.) you can study driver reactions during dangerous situations that could result in serious injuries if they occurred in the real world. An important component of a driving simulator is the vehicle model, i.e., the model that describes how the vehicle reacts to its surroundings and driver inputs. To increase the simulator realism or the computational performance, it is possible to divide the vehicle model into subsystems that run on different computers that are connected in a network. A subsystem can also be replaced with hardware using so-called hardware-in-the-loop simulation, and can then be connected to the rest of the vehicle model using a specified interface. The technique of dividing a model into smaller subsystems running on separate nodes that communicate through a network is called distributed simulation. This thesis investigates if and how a distributed simulator design might facilitate the maintenance and new development required for a driving simulator to be able to keep up with the increasing pace of vehicle development. For this purpose, three different distributed simulator solutions have been designed, built, and analyzed with the aim of constructing distributed simulators, including external hardware, where the simulation achieves the same degree of realism as with a traditional driving simulator. One of these simulator solutions has been used to create a parameterized powertrain model that can be configured to represent any of a number of different vehicles. Furthermore, the driver's driving task is combined with the powertrain model to monitor deviations. After the powertrain model was created, subsystems from a simulator solution and the powertrain model have been transferred to a Modelica environment. The goal is to create a framework for requirement testing that guarantees sufficient realism, also for a distributed driving simulation. The results show that the distributed simulators we have developed work well overall with satisfactory performance. It is important to manage the vehicle model and how it is connected to a distributed system. In the distributed driveline simulator setup, the network delays were so small that they could be ignored, i.e., they did not affect the driving experience. However, if one gradually increases the delays, a driver in the distributed simulator will change his/her behavior. The impact of communication latency on a distributed simulator also depends on the simulator application, where different usages of the simulator, i.e., different simulator studies, will have different demands. We believe that many simulator studies could be performed using a distributed setup. One issue is how modifications to the system affect the vehicle model and the desired behavior. This leads to the need for methodology for managing model requirements. In order to detect model deviations in the simulator environment, a monitoring aid has been implemented to help notify test managers when a model behaves strangely or is driven outside of its validated region. Since the availability of distributed laboratory equipment can be limited, the possibility of using Modelica (which is an equation-based and object-oriented programming language) for simulating subsystems is also examined. Implementation of the model in Modelica has also been extended with requirements management, and in this work a framework is proposed for automatically evaluating the model in a tool.

Download or read book Heavy Vehicle Event Data Recorder Interpretation written by Christopher D Armstrong and published by SAE International. This book was released on 2018-11-02 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last ten years have seen explosive growth in the technology available to the collision analyst, changing the way reconstruction is practiced in fundamental ways. The greatest technological advances for the crash reconstruction community have come in the realms of photogrammetry and digital media analysis. The widespread use of scanning technology has facilitated the implementation of powerful new tools to digitize forensic data, create 3D models and visualize and analyze crash vehicles and environments. The introduction of unmanned aerial systems and standardization of crash data recorders to the crash reconstruction community have enhanced the ability of a crash analyst to visualize and model the components of a crash reconstruction. Because of the technological changes occurring in the industry, many SAE papers have been written to address the validation and use of new tools for collision reconstruction. Collision Reconstruction Methodologies Volumes 1-12 bring together seminal SAE technical papers surrounding advancements in the crash reconstruction field. Topics featured in the series include: • Night Vision Study and Photogrammetry • Vehicle Event Data Recorders • Motorcycle, Heavy Vehicle, Bicycle and Pedestrian Accident Reconstruction The goal is to provide the latest technologies and methodologies being introduced into collision reconstruction - appealing to crash analysts, consultants and safety engineers alike.

Download or read book Commercial Motor Vehicle Simulation Technology to Improve Driver Training Testing and Licensing Methods Final Report written by Robert J. Carroll and published by . This book was released on 1996 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: