Download or read book Heavy and Extra heavy Oil Upgrading Technologies written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2013-04-12 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional reservoirs of oil and gas represent a huge additional global source of fossil fuels. However, there is much still to be done to improve techniques for their processing to make recovery and refining of these particular energy sources more cost-effective. Brief but readable, Heavy and Extra-heavy Oil Upgrading Technologies provide readers with a strategy for future production (the up-stream) and upgrading (the down-stream). The book provides the reader with an understandable overview of the chemistry and engineering behind the latest developments and technologies in the industry as well as the various environmental regulations.Clear and rigorous, Heavy and Extra-heavy Oil Upgrading Technologies will prove tool for those scientists and engineers already engaged in fossil fuel science and technology as well as scientists, non-scientists, engineers, and non-engineers who wish to gain a general overview or update of the science and technology of unconventional fossil fuels in general and upgrading technologies in particular. The use of microorganisms and a number of physical methods, such as ultrasound, median microwave, cold plasma, electrokinetic and monocrystalline intermetallics, etc., will be discussed for the first time. Overview of the chemistry, engineering, and technology of oil sands Microorganisms and a number of physical methods such as ultrasound, median microwave, cold plasma, electrokinetic and monocrystalline intermetallics Evolving and new environmental regulations regarding oil sands production processes
Download or read book Heavy Oil Recovery and Upgrading written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2019-02-28 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy Oil Recovery and Upgrading covers properties, factors, methods and all current and upcoming processes, giving engineers, new and experienced, the full spectrum of recovery choices, including SAGD, horizontal well technology, and hybrid approaches. Moving on to the upgrading and refining of the product, the book also includes information on in situ upgrading, refining options, and hydrogen production. Rounding out with environmental effects, management methods on refinery waste, and the possible future configurations within the refinery, this book provides engineers with a single source to make decisions and manage the full range of challenges. Presents the properties, mechanisms, screening criteria and field applications for heavy oil enhanced recovery projects Includes current upgrading options and future methods for refining heavy oil development Fills in the gaps between literature and practical application for everyday industry reference
Download or read book Subsurface Upgrading of Heavy Crude Oils and Bitumen written by Cesar Ovalles and published by CRC Press. This book was released on 2019-07-24 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy crude oils and bitumen represent more than 50% of all hydrocarbons available on the planet. These feedstocks have a low amount of distillable material and high level of contaminants that make their production, transportation, and refining difficult and costly by conventional technologies. Subsurface Upgrading of Heavy Crude Oils and Bitumen is of interest to the petroleum industry mainly because of the advantages compared to aboveground counterparts. The author presents an in-depth account and a critical review of the progress of industry and academia in underground or In-Situ upgrading of heavy, extra-heavy oils and bitumen, as reported in the patent and open literature. This work is aimed to be a standalone monograph, so three chapters are dedicated to the composition of petroleum and fundamentals of crude oil production and refining. Key Features: Offers a multidisciplinary scope that will appeal to chemists, geologists, biologists, chemical engineers, and petroleum engineers Presents the advantages and disadvantages of the technologies considered Discusses economic and environmental considerations for all the routes evaluated and offers perspectives from experts in the field working with highlighted technologies
Download or read book Upgrading of Heavy and Extra Heavy Crude Oils by Catalytic Hydrotreating written by Jorge Ancheyta and published by CRC Press. This book was released on 2023-09-26 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the common approaches to upgrade heavy and extra-heavy crude oils by means of catalytic hydrotreating, emphasizing hydrogen addition technology as well as carbon rejection alternatives. Kinetic and reactor models are combined with experimental data to simulate and optimize commercial-scale reactor performance. Key Features • Focuses on fixed-bed catalytic hydrotreating and catalysts and process scheme characteristics for commercial application. • Guides readers on hydrotreating process technology development from batch reactor experiments to semi-commercial test. • Describes step-by-step methodologies for development of kinetic models based on experimental data generated at different reaction scales. • Provides detailed explanation on how to formulate a reactor model for the simulation of catalytic hydrotreating of heavy oils. A comprehensive guide to the upgrading of crude oils, this book has particular appeal for petroleum refining industry professionals, catalyst developers, workshop instructors, professors, and their graduate and postgraduate students.
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalytic In Situ Upgrading of Heavy and Extra Heavy Crude Oils written by Mikhail A. Varfolomeev and published by John Wiley & Sons. This book was released on 2023-09-25 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to a cutting-edge and cost-effective refinement process for heavy oil Oil sufficiently viscous that it cannot flow normally from production wells is called heavy oil and constitutes as much as 70% of global oil reserves. Extracting and refining this oil can pose significant challenges, including very high transportation costs. As a result, processes which produce and partially refine heavy oil in situ, known as catalytic upgrading, are an increasingly important part of the heavy oil extraction process, and the reduced carbon footprint associated with these methods promises to make them even more significant in the coming years. Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils provides a comprehensive introduction to these processes. It introduces the properties and characteristics of heavy and extra-heavy oil before discussing different catalysts and catalyzing processes, their mechanisms and underlying physics, and more. It offers the full sweep of description and analysis required for petroleum and chemical engineers to understand this vital aspect of the modern oil industry. Readers will also find: Detailed discussion of subjects including electron paramagnetic resonance spectroscopy, nuclear magnetic resonance spectroscopy, and more Analysis of both liquid catalysts and nanoparticle catalysts A numerical simulation of the catalytic in-situ oil upgrading process Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils is a valuable reference for petroleum and chemical engineers as well as advanced undergraduate and graduate students in related fields.
Download or read book Upgrading of Heavy and Extra Heavy Crude Oils by Catalytic Hydrotreating written by Jorge Ancheyta and published by CRC Press. This book was released on 2023-09-26 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the common approaches to upgrade heavy and extra-heavy crude oils by means of catalytic hydrotreating, emphasizing hydrogen addition technology as well as carbon rejection alternatives. Kinetic and reactor models are combined with experimental data to simulate and optimize commercial-scale reactor performance. Key Features • Focuses on fixed-bed catalytic hydrotreating and catalysts and process scheme characteristics for commercial application. • Guides readers on hydrotreating process technology development from batch reactor experiments to semi-commercial test. • Describes step-by-step methodologies for development of kinetic models based on experimental data generated at different reaction scales. • Provides detailed explanation on how to formulate a reactor model for the simulation of catalytic hydrotreating of heavy oils. A comprehensive guide to the upgrading of crude oils, this book has particular appeal for petroleum refining industry professionals, catalyst developers, workshop instructors, professors, and their graduate and postgraduate students.
Download or read book The Refinery of the Future written by James G. Speight and published by William Andrew. This book was released on 2010-12-21 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: As feedstocks to refineries change, there must be an accompanying change in refinery technology. This means a movement from conventional means of refining heavy feedstocks using (typically) coking technologies to more innovative processes that will coax the last drips of liquid fuels from the feedstock. This book presents the evolution of refinery processes during the last century and as well as the means by which refinery processes will evolve during the next three-to-five decades. Chapters contain material relevant to (1) comparisons of current feedstocks with heavy oil and bio-feedstocks; (2) evolution of refineries since the 1950s, (3) properties and refinability of heavy oil and bio-feedstocks, (4) thermal processes vs. hydroprocesses, and (5) evolution of products to match the environmental market. Process innovations that have influenced refinery processing over the past three decades are presented, as well as the relevant patents that have the potential for incorporation into future refineries.• Comparison of current feedstocks with heavy oil and bio-feedstocks. • Evolution of refineries over the past three decades. • Properties and refinability of heavy oil and bio-feedstocks. • Thermal processes vs. Hydroprocesses. • Evolution of products to match the environmental market. Investigates the engineering and plant design challenges presented by heavy oil and bio-feedstocks Explores the legislatory and regulatory climate, including increasingly stringent environmental requirements Examines the trade-offs of thermal processes vs. hydroprocesses
Download or read book Heavy Oil Production Processes written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2013-03-05 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: As conventional-oil resources are depleted worldwide, vast heavy oil reserves available in various parts of the world become increasingly important as a secure future energy source. Brief but readable, Heavy Oil Production Processes discusses the latest improvements in production processes including; thermal methods (steam floods, cyclic steam stimulation, SAGD) as well as non-thermal methods (cold flow with sand production, cyclic solvent process, VAPEX). The book begins with an overview of the chemistry, engineering, and technology of heavy oil as they evolve into the twenty-first century. The preceding chapters are written to provide a basic understanding of each technology, evolving processes and new processes as well as the various environmental regulations. Clear and rigorous, Heavy Oil Production Processes will prove useful for those scientists and engineers already engaged in fossil fuel science and technology as well as scientists, non-scientists, engineers, and non-engineers who wish to gain a general overview or update of the science and technology of fossil fuels. The not only does the book discuss the production processes but also provides methods which should reduce environmental footprint and improve profitability. Overview of the chemistry, engineering, and technology of oil sands Updates on the evolving processes and new processes Evolving and new environmental regulations regarding oil sands production
Download or read book Practical Advances in Petroleum Processing written by Chang Samuel Hsu and published by Springer Science & Business Media. This book was released on 2007-01-10 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes topics not found together in books on petroleum processing: economics, automation, process modeling, online optimization, safety, environmental protection Combines overviews of petroleum composition, refinery processes, process automation, and environmental protection with comprehensive chapters on recent advances in hydroprocessing, FCC, lubricants, hydrogen management Gives diverse perspectives, both geographic and topical, because contributors include experts from eight different countries in North America, Europe and Asia, representing oil companies, universities, catalyst vendors, process licensors, consultants and engineering contractors
Download or read book Catalytic In Situ Upgrading of Heavy and Extra Heavy Crude Oils written by Mikhail A. Varfolomeev and published by John Wiley & Sons. This book was released on 2023-06-06 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils A comprehensive guide to a cutting-edge and cost-effective refinement process for heavy oil Oil sufficiently viscous that it cannot flow normally from production wells is called heavy oil and constitutes as much as 70% of global oil reserves. Extracting and refining this oil can pose significant challenges, including very high transportation costs. As a result, processes which produce and partially refine heavy oil in situ, known as catalytic upgrading, are an increasingly important part of the heavy oil extraction process, and the reduced carbon footprint associated with these methods promises to make them even more significant in the coming years. Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils provides a comprehensive introduction to these processes. It introduces the properties and characteristics of heavy and extra-heavy oil before discussing different catalysts and catalyzing processes, their mechanisms and underlying physics, and more. It offers the full sweep of description and analysis required for petroleum and chemical engineers to understand this vital aspect of the modern oil industry. Readers will also find: Detailed discussion of subjects including electron paramagnetic resonance spectroscopy, nuclear magnetic resonance spectroscopy, and more Analysis of both liquid catalysts and nanoparticle catalysts A numerical simulation of the catalytic in-situ oil upgrading process Catalytic In-Situ Upgrading of Heavy and Extra-Heavy Crude Oils is a valuable reference for petroleum and chemical engineers as well as advanced undergraduate and graduate students in related fields.
Download or read book Hydrotreating and Hydrocracking Processes in Refining Technology written by James G. Speight and published by CRC Press. This book was released on 2023-09-29 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an industry expert with over 50 years of experience, this book details the various solvent processes that are used in crude oil refineries. Providing an in-depth exploration of the different types of processes, as well as the types of feedstocks that can be used with them, this book prepares readers for changes as the industry evolves. Key Features: Describes feedstock evaluation and the effects of elemental, chemical, and fractional composition. Contains an extensive glossary of all related concepts in hydrotreating and hydrocracking processes. Considers next-generation processes and developments. This book is an essential guide for engineers, scientists, and students in the field of petroleum processing and refining technology, including professionals, technicians, management personnel, and academics.
Download or read book Hydrogen Production Processes in Refining Technology written by James G. Speight and published by CRC Press. This book was released on 2024-06-26 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the various approaches to the production of hydrogen in petroleum refining. The need for hydrogen is addressed, and then the differences between the processes are detailed. This practical and accessible guide is written for managers, professionals, and technicians as well as graduate students transitioning into the refining industry. Key Features: Describes hydrogen purification methods and processes, providing relevant process data and fully describing process operations Describes hydrogen purification methods and processes, detailing the types of feedstock that can be used and exploring the options and parameters of each process Details commercial processes, including gasification pretreatment and reactions and considers next-generation processes and developments
Download or read book Heavy Oil written by Amir H. Mohammadi and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy oil is a crude oil of typically less than 20°API gravity and higher than 200 cp (centipoise) viscosity at reservoir conditions. It is characterised by a viscous, dense, and asphaltic nature. Heavy oil reservoirs are considered as some of the worlds largest reserves. Extraction, recovery, and production of heavy oil are the main challenges in the heavy oil industry. This book provides current research on heavy and crude oils.
Download or read book Sub and Supercritical Hydrothermal Technology written by Sandeep Kumar and published by CRC Press. This book was released on 2019-11-05 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sub- and Supercritical Hydrothermal Technology: Industrial Applications offers a practical view of a variety of industrial applications and their challenges, offering a deep understanding of the application of sub- and supercritical fluids and their techno-economic viability. This book covers a wide range of applications of hydrothermal processing that result in almost zero waste, high energy efficiency, sustainable chemical processes, and minimal impact over the life cycle. These applications include processing of hazardous waste, bioproducts, coal, lipids, heavy oil and bitumen, and carbon materials. The use of hot-compressed water instead of different organic solvents, such as methanol, acetone, and hexane, is an environmentally benign, green, and sustainable option which can help to design chemical processes that support green chemistry and engineering. This book is pertinent for researchers and professionals in the fields of chemical engineering, industrial chemistry, environmental engineering, materials engineering, and manufacturing.
Download or read book Handbook of Alternative Fuel Technologies written by Sunggyu Lee and published by CRC Press. This book was released on 2014-07-08 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: While strides are being made in the research and development of environmentally acceptable and more sustainable alternative fuels-including efforts to reduce emissions of air pollutants associated with combustion processes from electric power generation and vehicular transportation-fossil fuel resources are limited and may soon be on the verge of d
Download or read book Hydroprocessing of Heavy Oils and Residua written by Jorge Ancheyta and published by CRC Press. This book was released on 2007-05-08 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many oil refineries employ hydroprocessing for removing sulfur and other impurities from petroleum feedstocks. Capable of handling heavier feedstocks than other refining techniques, hydroprocessing enables refineries to produce higher quality products from unconventional- and formerly wasted- sources. Hydroprocessing of Heavy Oils and Residua
