Download or read book Metal Matrix Composites written by C.T. Lynch and published by CRC Press. This book was released on 2018-01-18 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of reinforcing a material by the use of a fiber is not a new one. The Egyptian brick layer employed the same principle more than three thousand years ago when straw was incorporated into the bricks. More recent examples of fiber reinforced composites are steel-reinforced concrete, nylon and rayon cord reinforced tires, and fiberglass reinforced plastics. In the last several years considerable progress has been made on new composite structures particularly utilizing boron (on tungsten substrate) fibers in various matrices. Many of these advances have been reviewed recently by P. M. Sinclair1 and by Alexander, Shaver, and Withers.2 An excellent earlier survey is available by Rauch Sutton, and McCreight.3 Boron-reinforced epoxy composites are being fabricated and tested as jet engine components, fuselage components, and even as a complete aircraft wing because of the tremendous gain in experimentally demonstrated properties such as modulus, strength, and fatigue resistance, particularly on a weight normalized (e.g., strength/density) basis. Other than glass/epoxy and boron/ epoxy composites and perhaps boron/aluminum, the systems now under study are in the early stages of research and development. These include other boron/metal composites, graphite/polymer, graphite/metal, graphite/graphite, alumina/metal, and aligned eutectic (directionally, solidified) combinations. As Sinclair points out, designers are wary about filamentary composites becausethere is little background information and scant experience.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-06 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book The Science of Armour Materials written by Ian Crouch and published by Woodhead Publishing. This book was released on 2016-09-21 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science of Armour Materials comprehensively covers the range of armor materials from steels and light alloys, through glasses and ceramics, to fibers, textiles, and protective apparel. The book also discusses aspects of analytical and numerical modeling, as well as laboratory-based high-strain rate testing and ballistic testing methodologies. Each chapter is written from an international perspective, including reviews of the current global literature, and incorporates case studies that focus upon real life applications, research outcomes, and lessons learned. The threat spectrum is restricted to small arms ammunition, high velocity fragments, and stab and spike attacks, as well as blast loadings. - Features input from an editor who is an expert in his field: Dr. Ian Crouch, the author of over 80 publications in his field, with three patents to his name - Provides systematic and comprehensive coverage of armor materials, modeling, and testing - Offers a cross-disciplinary approach that brings together expertise in materials science and defense engineering - Discusses aspects of analytical and numerical modeling, as well as laboratory-based high-strain rate testing and ballistic testing methodologies
Download or read book Industrial Diamond Review written by and published by . This book was released on 1989 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Ceramic Microstructures written by Antoni P. Tomsia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, titled Proceedings of the International Materials Symposium on Ce ramic Microstructures: Control at the Atomic Level summarizes the progress that has been achieved during the past decade in understanding and controlling microstructures in ceram ics. A particular emphasis of the symposium, and therefore of this volume, is advances in the characterization, understanding, and control of micro structures at the atomic or near-atomic level. This symposium is the fourth in a series of meetings, held every ten years, devoted to ceramic microstructures. The inaugural meeting took place in 1966, and focussed on the analysis, significance, and production of microstructure; the symposium emphasized the need for, and importance of characterization in achieving a more complete understanding of the physical and chemical characteristics of ceramics. A consensus emerged at that meeting on the critical importance of characterization in achieving a more complete understanding of ceramic properties. That point of view became widely accepted in the ensuing decade. The second meeting took place in 1976 at a time of world-wide energy shortages and thus emphasized energy-related applications of ceramics, and more specifically, microstructure-property relationships of those materials. The third meeting, held in 1986, was devoted to the role that interfaces played both during processing, and in influencing the ultimate properties of single and polyphase ceramics, and ceramic-metal systems.
Download or read book Opportunities in Protection Materials Science and Technology for Future Army Applications written by National Research Council and published by National Academies Press. This book was released on 2011-08-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Armor plays a significant role in the protection of warriors. During the course of history, the introduction of new materials and improvements in the materials already used to construct armor has led to better protection and a reduction in the weight of the armor. But even with such advances in materials, the weight of the armor required to manage threats of ever-increasing destructive capability presents a huge challenge. Opportunities in Protection Materials Science and Technology for Future Army Applications explores the current theoretical and experimental understanding of the key issues surrounding protection materials, identifies the major challenges and technical gaps for developing the future generation of lightweight protection materials, and recommends a path forward for their development. It examines multiscale shockwave energy transfer mechanisms and experimental approaches for their characterization over short timescales, as well as multiscale modeling techniques to predict mechanisms for dissipating energy. The report also considers exemplary threats and design philosophy for the three key applications of armor systems: (1) personnel protection, including body armor and helmets, (2) vehicle armor, and (3) transparent armor. Opportunities in Protection Materials Science and Technology for Future Army Applications recommends that the Department of Defense (DoD) establish a defense initiative for protection materials by design (PMD), with associated funding lines for basic and applied research. The PMD initiative should include a combination of computational, experimental, and materials testing, characterization, and processing research conducted by government, industry, and academia.
Download or read book Advances in Ceramic Matrix Composites written by I M Low and published by Woodhead Publishing. This book was released on 2018-01-20 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ceramic Matrix Composites, Second Edition, delivers an innovative approach to ceramic matrix composites, focusing on the latest advances and materials developments. As advanced ceramics and composite materials are increasingly utilized as components in batteries, fuel cells, sensors, high-temperature electronics, membranes and high-end biomedical devices, and in seals, valves, implants, and high-temperature and wear components, this book explores the substantial progress in new applications. Users will gain knowledge of the latest advances in CMCs, with an update on the role of ceramics in the fabrication of Solid Oxide Fuel Cells for energy generation, and on natural fiber-reinforced eco-friendly geopolymer and cement composites. The specialized information contained in this book will be highly valuable to researchers and graduate students in ceramic science, engineering and ceramic composites technology, and engineers and scientists in the aerospace, energy, building and construction, biomedical and automotive industries. - Provides detailed coverage of parts and processing, properties and applications - Includes new developments in the field, such as natural fiber-reinforced composites and the use of CMCs in Solid Oxide Fuel Cells (SOFCs) - Presents state-of-the-art research, enabling the reader to understand the latest applications for CMCs
Download or read book Joining of Ceramics written by M.G. Nicholas and published by Springer. This book was released on 1990 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: An examination of the methods used and the types of bonding that occur in the joining of ceramics to glass or metals, both on surfaces and at joints. The book deals with both the physical and chemical aspects of the bonding.
Download or read book Preparative Methods in Solid State Chemistry written by Paul Hagenmuller and published by Elsevier. This book was released on 2012-12-02 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preparative Methods in Solid State Chemistry deals with the preparative methods used in solid state chemistry and highlights the importance of the chemist's role in preparing materials of desired quality as well as obtaining materials according to the requirements of the user such as the physicist. Topics covered range from high-pressure techniques in preparative chemistry to methods of growing single crystals of high-melting-point oxides. This book is comprised of 14 chapters and begins with an overview of possibilities for high-pressure synthesis, as well as the methods used to obtain high pressures, including transmission by gaseous or liquid fluids or in the solid state. The method of shock waves is then considered both from the point of view of thermodynamics and thermoelasticity, along with the possibility of using superpressures for evidently revolutionary applications. Subsequent chapters focus on the synthesis of single crystals of refractory oxides either at high temperatures (essentially liquid-solid transformations) or at lower temperatures in the presence of a solvent or a chemical reagent. The production of single crystals by electrolytic reduction in molten salts is also described. Numerous examples of vapor transport reactions in a temperature gradient are presented. This monograph should be of interest to chemists and students of solid state chemistry.
Download or read book Handbook of Advanced Ceramics and Composites written by Yashwant Mahajan and published by Springer. This book was released on 2020-11-26 with total page 1527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents an authoritative account of the potential of advanced ceramics and composites in strategic applications, including defense, national security, aerospace, and energy security (especially nuclear energy). It highlights how their unique combination of superior properties such as low density, high strength, high elastic modulus, high hardness, high temperature capability, and excellent chemical and environmental stability are optimized in technologies within these fields. The handbook is organized according to application type. It allows readers to learn about strategies that have been used in different fields and to transfer them to their own. The book addresses a wide variety of ceramics and their composites, including PZT ceramics, carbon nanotubes, aerogels, silica radomes, relaxor ferroelectrics, and many others.
Download or read book Aluminum and Magnesium Metal Matrix Nanocomposites written by Lorella Ceschini and published by Springer. This book was released on 2016-10-18 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book looks into the recent advances in the ex-situ production routes and properties of aluminum and magnesium based metal matrix nanocomposites (MMNCs), produced either by liquid or semi-solid state methods. It comprehensively summarizes work done in the last 10 years including the mechanical properties of different matrix/nanoreinforcement systems. The book also addresses future research direction, steps taken and missing developments to achieve the full industrial exploitation of such composites. The content of the book appeals to researchers and industrial practitioners in the area of materials development for metal matrix nanocomposites and its applications.
Download or read book Metal Matrix Composites in Industry written by Alexander Evans and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal matrix composites are making tangible inroads into the "real" world of engineering. They are used in engineering components such as brake rotors, aircraft parts, combustion engines, and heat sinks for electronic systems. Yet, outside a relatively limited circle of specialists, these materials are mostly unknown. Designers do not as a rule think of using these materials, in part because access to information is difficult as these materials have not really entered engineering handbooks. Metal Matrix Composites in Industry is thus useful to engineers who wish to gain introductory knowledge of these materials and who want to know where "to find" them. Additionally, it provides researchers and academics with a survey of current industrial activity in this area of technology.
Download or read book Metals Abstracts written by and published by . This book was released on 1999-04 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
