Download or read book Heat Transport Through Thermal Barrier Coatings written by Liguo Chen and published by ProQuest. This book was released on 2008 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The present study deals with heat transport phenomena through thermal barrier coatings and consists of two parts. The first part focuses on the radiation properties of semitransparent materials and the effect of radiation on the temperature distributions within a TBC. The second part focuses on measuring thermal diffusivity of materials. A new data reduction, numerical method is introduced and several important aspects related to the accuracy of the thermal diffusivity measurement of monolithic and coated materials by thermal flash technique are highlighted."--Page vi
Download or read book Thermal Barrier Coatings Failure Theory and Evaluation Technology written by Yichun Zhou and published by Springer Nature. This book was released on 2022-10-08 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the failure theories and evaluation techniques of thermal barrier coatings, covering the thermal-mechanical–chemical coupling theories, performance and damage characterization techniques, and related evaluations. Thermal barrier coatings are the key thermal protection materials for high-temperature components in advanced aeroengines. Coating spallation is a major technical bottleneck faced by researchers. The extremely complex microstructure, diverse service environments, and failure behaviors bring challenges to the spallation analysis in terms of the selective use of mechanical theories, experimental methods, and testing platforms. In the book, the authors provide a systematic summary of the latest research and technological advances and present their insights and findings in the past couple of decades. This book is not only suitable for researchers and engineers in thermal barrier coatings and related fields but also a good reference for upper-undergraduate and postgraduate students of materials science and mechanics majors.
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Fundamentals of Gas Turbines written by William W. Bathie and published by John Wiley & Sons. This book was released on 1996 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the fundamentals of the gas turbine engine, including cycles, components, component matching, and environmental considerations.
Download or read book Design of Thermal Barrier Coatings written by Mohit Gupta and published by Springer. This book was released on 2015-05-05 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the relationships between microstructure, interface roughness, and properties of thermal barrier coatings. The author proposes a method for the reduction of the thermal conductivity of the ceramic layer in order to increase the lifetime of thermal barrier coatings. He includes models for the optimization of ceramic layer microstructure and interface roughness.
Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.
Download or read book Thermal Modelling of Various Thermal Barrier Coatings in a High Heat Flux Rocket Engine written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-10-15 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional Air Plasma Sprayed (APS) ZrO2-Y2O3 Thermal Barrier Coatings (TBC's) and Low Pressure Plasma Sprayed (LPPS) ZrO2-Y2O3/Ni-Cr-Al-Y cermet coatings were tested in a H2/O2 rocked engine. The traditional ZrO2-Y2O3 (TBC's) showed considerable metal temperature reductions during testing in the hydrogen-rich environment. A thermal model was developed to predict the thermal response of the tubes with the various coatings. Good agreement was observed between predicted temperatures and measured temperatures at the inner wall of the tube and in the metal near the coating/metal interface. The thermal model was also used to examine the effect of the differences in the reported values of the thermal conductivity of plasma sprayed ZrO2-Y2O3 ceramic coatings, the effect of 100 micron (0.004 in.) thick metallic bond coat, the effect of tangential heat transfer around the tube, and the effect or radiation from the surface of the ceramic coating. It was shown that for the short duration testing in the rocket engine, the most important of these considerations was the effect of the uncertainty in the thermal conductivity of temperatures (greater than 100 C) predicted in the tube. The thermal model was also used to predict the thermal response of the coated rod in order to quantify the difference in the metal temperatures between the two substrate geometries and to explain the previously-observed increased life of coatings on rods over that on tubes. A thermal model was also developed to predict heat transfer to the leading edge of High Pressure Fuel Turbopump (HPFTP) blades during start-up of the space shuttle main engines. The ability of various TBC's to reduce metal temperatures during the two thermal excursions occurring on start-up was predicted. Temperature reductions of 150 to 470 C were predicted for 165 micron (0.0065 in.) coatings for the greater of the two thermal excursions. Nesbitt, James A. Glenn Research Center RTOP 505-63-1A
Download or read book A Non Contact Thermal Barrier Coating TBC Heat Flux Sensor Using a Self Calibrating Multiwavelength Pyrometer written by and published by . This book was released on 1996 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Thermal Barrier Coatings written by Mohit Gupta and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the relationships between microstructure, interface roughness, and properties of thermal barrier coatings. The author proposes a method for the reduction of the thermal conductivity of the ceramic layer in order to increase the lifetime of thermal barrier coatings. He includes models for the optimization of ceramic layer microstructure and interface roughness.
Download or read book Thermal Modelling of Various Thermal Barrier Coatings in a High Heat Flux Rocket Engine written by and published by . This book was released on 1989 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spectra and Energy Levels of Rare Earth Ions in Crystals written by Gerhard Heinrich Dieke and published by . This book was released on 1968 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Barrier Coatings written by Hongbo Guo and published by Woodhead Publishing. This book was released on 2023-01-18 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Barrier Coatings, Second Edition plays a critical role in counteracting the effects of corrosion and degradation of exposed materials in high-temperature environments such as gas turbine and aero-engines. This updated edition reviews recent advances in the processing and performance of thermal barrier coatings, as well as their failure mechanisms. Novel technologies for the manufacturing of thermal barrier coatings (TBCs) such as plasma spray-physical vapor deposition and suspension plasma spray, are covered, as well as severe degradation of TBCs caused by CMAS attack. In addition to discussions of new materials and technologies, an outlook about next generation TBCs, including T/EBCs is discussed.This edition will provide the fundamental science and engineering of thermal barrier coatings for researchers in the field of TBCs, as well as students looking for a tutorial. Includes coverage of emerging materials, such as rare-earth doped ceramics Presents the latest on plasma spray-physical vapor deposition and suspension (solution precursor) Discusses the degradation of TBCs caused by CMAS attack and its protection Looks at thermally environmental barrier coatings, interdiffusion and diffusion barrier
Download or read book Inorganic and Organic Thin Films written by Yu Song and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn more about foundational and advanced topics in polymer thin films and coatings besides species with this powerful two-volume resource The two-volume Inorganic and Organic Thin Films: Fundamentals, Fabrication, and Applications delivers a foundational resource for current researchers and commercial users involved in the design and fabrication of thin films. The book offers newcomers to the field a thorough description of new design theory, fabrication methods, and applications of advanced thin films. Readers will discover the physics and chemistry underlying the manufacture of new thin films and coatings in this leading new resource that promises to become a handbook for future applications of the technology. This one-stop reference brings together all important aspects of inorganic and polymeric thin films and coatings, including construction, assembly, deposition, functionality, patterning, and characterization. Explorations of their applications in industries as diverse as information technology, new energy, biomedical engineering, aerospace, and oceanographic engineering round out this fulsome exploration of one of the most exciting and rapidly developing areas of scientific and industrial research today. Readers will also learn from: A comprehensive introduction to the progress of thin films and coatings as well as fundamentals in functional thin films and coatings An exploration of multi-layered magnetic thin films for electron transport control and signal sensing, including giant magnetoresistance, colossal magnetoresistance, tunneling magnetoresistance, and the quantum anomalous Holzer effect An in time summary of high-quality magneto-optics, nanophotonics, spin waves and spintronics using bismuth-substituted iron garnet thin films as examples A thorough discussion of template-assisted fabrication of nanostructure thin films for ultrasensitive detection of chemicals and biomolecules A treatment of biomass derived functional films and coatings Perfect for materials scientists and inorganic chemists, Inorganic and Organic Thin Films will also earn a place in the libraries of solid state physicists and physical chemists working in private industry, as well as polymer and surface chemists who seek to improve their understanding of thin films and coatings.
Download or read book Thermal barrier coating by polymer derived ceramic technique for application in exhaust systems written by Gilvan Barroso and published by Cuvillier Verlag. This book was released on 2018-09-04 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal barrier coatings (TBCs) are ceramic coating systems developed to reduce the heat transfer from a hot medium to the coated parts. This technology can be used in automotive exhaust systems to reduce the heat transfer from the exhaust gases to the metal pipes. As a result, catalytic converters can reach the ideal temperature for the conversion of gases more quickly, reducing emissions. In order to be effective, coatings must be applied to the inside of pipes. However, conventional techniques for the preparation of ceramic coatings are not suitable for the deposition of coatings inside of long pipes with small diameter, or are too expensive. In this work, a TBC system was developed using the polymer-derived ceramics (PDC) technique. In this method, ceramic coatings are obtained by the thermal conversion of preceramic polymers into ceramics, after deposition of the coatings by simple lacquer techniques. Fillers are used to tailor the microstructure and the properties of the coatings. This book contains a review of the literature on PDC coatings, the procedures for the preparation of the TBCs, as well as their properties.
Download or read book Progress in Thermal Barrier Coatings written by ACerS (American Ceramics Society, The) and published by John Wiley & Sons. This book was released on 2009-07-15 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of the Progress in Ceramic Technology series compiles articles published on thermal barrier coatings (TBCs) by The American Ceramic Society (ACerS). It collects in one resource the current research papers on materials-related aspects of thermal barrier coatings and associated technologies. Logically organized and carefully selected, the papers in this edition divide into six categories: Applications Material Improvements and Novel Compositions Developments in Processing Mechanical Properties Thermal Properties Citations follow each title in the table of contents, making this a key resource for professionals and academia.
Download or read book Energy Efficient Approaches in Industrial Applications written by Murat Eyvaz and published by BoD – Books on Demand. This book was released on 2019-02-20 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large amount of energy is consumed in the industry to meet the power needed for production processes. In order to meet the heat and mechanical power needs required for many industrial processes, natural gas, petroleum fuel, and electricity are mostly used as energy sources. In addition to the efficient use of energy in order to reduce operating costs in industrial applications, alternatives such as efficient use of energy for conservation of resources and climate, energy recovery, renewable energy preferences, and energy production from wastes are becoming more common. With proper energy management, it is possible to increase energy efficiency independently of the size of the industry and the technologies used in the process. The development of new alternatives for energy efficiency and saving is crucial to meet the growing world energy needs and to compete effectively with fossil fuels and thus reduce greenhouse gases. This small book is a collection of research and reviewed chapters dealing with energy-efficient materials and strategies in different conditions.The Editors would like to record their sincere thanks to the authors for their contributions.
Download or read book Principles of Heat Transfer in Porous Media written by M. Kaviany and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the empirical treatment of fluid flow and heat transfer in porous media is over a century old, only in the last three decades has the transport in these heterogeneous systems been addressed in detail. So far, single-phase flows in porous media have been treated or at least formulated satisfactorily, while the subject of two-phase flow and the related heat-transfer in porous media is still in its infancy. This book identifies the principles of transport in porous media and compares the avalaible predictions based on theoretical treatments of various transport mechanisms with the existing experimental results. The theoretical treatment is based on the volume-averaging of the momentum and energy equations with the closure conditions necessary for obtaining solutions. While emphasizing a basic understanding of heat transfer in porous media, this book does not ignore the need for predictive tools; whenever a rigorous theoretical treatment of a phenomena is not avaliable, semi-empirical and empirical treatments are given.
