Download or read book Heat Transfer Thermodynamics and Fluid Flow Fundamentals written by G P Courseware and published by . This book was released on 1981-02-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Doe Fundamentals Handbook Thermodynamics Heat Transfer and Fluid Flow Volume 1 of 3 written by U. S. Department of Energy and published by Lulu.com. This book was released on 2016-05-12 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Thermodynamics, Heat Transfer, and Fluid Flow Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of the thermal sciences. The handbook includes information on thermodynamics and the properties of fluids; the three modes of heat transfer - conduction, convection, and radiation; and fluid flow, and the energy relationships in fluid systems. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility fluid systems.
Download or read book Engineering Thermofluids written by Mahmoud Massoud and published by Springer Science & Business Media. This book was released on 2005-09-16 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermofluids, while a relatively modern term, is applied to the well-established field of thermal sciences, which is comprised of various intertwined disciplines. Thus mass, momentum, and heat transfer constitute the fundamentals of th- mofluids. This book discusses thermofluids in the context of thermodynamics, single- and two-phase flow, as well as heat transfer associated with single- and two-phase flows. Traditionally, the field of thermal sciences is taught in univer- ties by requiring students to study engineering thermodynamics, fluid mechanics, and heat transfer, in that order. In graduate school, these topics are discussed at more advanced levels. In recent years, however, there have been attempts to in- grate these topics through a unified approach. This approach makes sense as thermal design of widely varied systems ranging from hair dryers to semicond- tor chips to jet engines to nuclear power plants is based on the conservation eq- tions of mass, momentum, angular momentum, energy, and the second law of thermodynamics. While integrating these topics has recently gained popularity, it is hardly a new approach. For example, Bird, Stewart, and Lightfoot in Transport Phenomena, Rohsenow and Choi in Heat, Mass, and Momentum Transfer, El- Wakil, in Nuclear Heat Transport, and Todreas and Kazimi in Nuclear Systems have pursued a similar approach. These books, however, have been designed for advanced graduate level courses. More recently, undergraduate books using an - tegral approach are appearing.
Download or read book Doe Fundamentals Handbook Thermodynamics Heat Transfer and Fluid Flow Volume 1 of 3 written by U. S. Department of Energy and published by Lulu.com. This book was released on 2016-05-12 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Thermodynamics, Heat Transfer, and Fluid Flow Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of the thermal sciences. The handbook includes information on thermodynamics and the properties of fluids; the three modes of heat transfer - conduction, convection, and radiation; and fluid flow, and the energy relationships in fluid systems. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility fluid systems.
Download or read book Doe Fundamentals Handbook Thermodynamics Heat Transfer and Fluid Flow Volume 2 of 3 written by U. S. Department of Energy and published by Lulu.com. This book was released on 2016-05-12 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Thermodynamics, Heat Transfer, and Fluid Flow Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of the thermal sciences. The handbook includes information on thermodynamics and the properties of fluids; the three modes of heat transfer - conduction, convection, and radiation; and fluid flow, and the energy relationships in fluid systems. This information will provide personnel with a foundation for understanding the basic operation of various types of DOE nuclear facility fluid systems.
Download or read book Fundamentals Of Mechanical Sciences Engineering Thermodynamics And Fluid Mechanics For Wbut written by Mukherjee and published by PHI Learning Pvt. Ltd.. This book was released on 2009 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of the Finite Element Method for Heat and Fluid Flow written by Roland W. Lewis and published by John Wiley and Sons. This book was released on 2008-02-07 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer is the area of engineering science which describes the energy transport between material bodies due to a difference in temperature. The three different modes of heat transport are conduction, convection and radiation. In most problems, these three modes exist simultaneously. However, the significance of these modes depends on the problems studied and often, insignificant modes are neglected. Very often books published on Computational Fluid Dynamics using the Finite Element Method give very little or no significance to thermal or heat transfer problems. From the research point of view, it is important to explain the handling of various types of heat transfer problems with different types of complex boundary conditions. Problems with slow fluid motion and heat transfer can be difficult problems to handle. Therefore, the complexity of combined fluid flow and heat transfer problems should not be underestimated and should be dealt with carefully. This book: Is ideal for teaching senior undergraduates the fundamentals of how to use the Finite Element Method to solve heat transfer and fluid dynamics problems Explains how to solve various heat transfer problems with different types of boundary conditions Uses recent computational methods and codes to handle complex fluid motion and heat transfer problems Includes a large number of examples and exercises on heat transfer problems In an era of parallel computing, computational efficiency and easy to handle codes play a major part. Bearing all these points in mind, the topics covered on combined flow and heat transfer in this book will be an asset for practising engineers and postgraduate students. Other topics of interest for the heat transfer community, such as heat exchangers and radiation heat transfer, are also included.
Download or read book DOE Thermodynamics Heat Transfer and Fluid Flow written by Knowledge Publications Corporation and published by Knowledge Publications. This book was released on 2006-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Low Gravity Fluid Dynamics and Heat Transfer written by Basil N. Antar and published by CRC Press. This book was released on 2019-07-23 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals of low gravity fluid dynamics and heat transfer. It investigates fluid behavior in low gravity environments such as those found in earth orbiting and space vehicles. The two major fluid phenomena affected by gravity (buoyancy and surface tension) are treated thoroughly from both the theoretical and applications points of view, and limitations of fluid and thermal responses to gravitational fields in space-based settings are clearly delineated. Summaries of all data available from low gravity flight and terrestrial experiments performed to date are also presented.
Download or read book Fundamentals of Convective Heat Transfer written by Gautam Biswas and published by CRC Press. This book was released on 2019-07-15 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal convection is often encountered by scientists and engineers while designing or analyzing flows involving exchange of energy. Fundamentals of Convective Heat Transfer is a unified text that captures the physical insight into convective heat transfer and thorough, analytical, and numerical treatments. It also focuses on the latest developments in the theory of convective energy and mass transport. Aimed at graduates, senior undergraduates, and engineers involved in research and development activities, the book provides new material on boiling, including nuances of physical processes. In all the derivations, step-by-step and systematic approaches have been followed.
Download or read book An Introduction to Fluid Mechanics and Heat Transfer written by J. M. Kay and published by Cambridge University Press. This book was released on 1975-01-09 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1975 as the third edition of a 1957 original, this book presents the fundamental ideas of fluid flow, viscosity, heat conduction, diffusion, the energy and momentum principles, and the method of dimensional analysis. These ideas are subsequently developed in terms of their important practical applications, such as flow in pipes and channels, pumps, compressors and heat exchangers. Later chapters deal with the equation of fluid motion, turbulence and the general equations of forced convection. The final section discusses special problems in process engineering, including compressible flow in pipes, solid particles in fluid flow, flow through packed beds, condensation and evaporation. This book will be of value to anyone with an interest the wider applications of fluid mechanics and heat transfer.
Download or read book Computational Fluid Mechanics and Heat Transfer Second Edition written by Richard H. Pletcher and published by CRC Press. This book was released on 1997-04-01 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text provides basic fundamentals of computational theory and computational methods. The book is divided into two parts. The first part covers material fundamental to the understanding and application of finite-difference methods. The second part illustrates the use of such methods in solving different types of complex problems encountered in fluid mechanics and heat transfer. The book is replete with worked examples and problems provided at the end of each chapter.
Download or read book Nano and Bio Heat Transfer and Fluid Flow written by Majid Ghassemi and published by Academic Press. This book was released on 2017-03-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano and Bio Heat Transfer and Fluid Flow focuses on the use of nanoparticles for bio application and bio-fluidics from an engineering perspective. It introduces the mechanisms underlying thermal and fluid interaction of nanoparticles with biological systems. This book will help readers translate theory into real world applications, such as drug delivery and lab-on-a-chip. The content covers how transport at the nano-scale differs from the macro-scale, also discussing what complications can arise in a biologic system at the nano-scale. It is ideal for students and early career researchers, engineers conducting experimental work on relevant applications, or those who develop computer models to investigate/design these systems. Content coverage includes biofluid mechanics, transport phenomena, micro/nano fluid flows, and heat transfer. Discusses nanoparticle applications in drug delivery Covers the engineering fundamentals of bio heat transfer and fluid flow Explains how to simulate, analyze, and evaluate the transportation of heat and mass problems in bio-systems
Download or read book Fundamentals of Multiphase Heat Transfer and Flow written by Amir Faghri and published by Springer Nature. This book was released on 2019-09-13 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a modern treatment of fundamentals of heat and mass transfer in the context of all types of multiphase flows with possibility of phase-changes among solid, liquid and vapor. It serves equally as a textbook for undergraduate senior and graduate students in a wide variety of engineering disciplines including mechanical engineering, chemical engineering, material science and engineering, nuclear engineering, biomedical engineering, and environmental engineering. Multiphase Heat Transfer and Flow can also be used to teach contemporary and novel applications of heat and mass transfer. Concepts are reinforced with numerous examples and end-of-chapter problems. A solutions manual and PowerPoint presentation are available to instructors. While the book is designed for students, it is also very useful for practicing engineers working in technical areas related to both macro- and micro-scale systems that emphasize multiphase, multicomponent, and non-conventional geometries with coupled heat and mass transfer and phase change, with the possibility of full numerical simulation.
Download or read book Heat Exchangers written by Holger Martin and published by Routledge. This book was released on 2018-05-04 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a text/reference illustrating thermal and hydraulic design of heat exchangers. The book shows how to apply the fundamentals of thermodynamics, heat transfer, and fluid dynamics for a systematic analysis of the phenomena in heat exchangers, important to energy effective operation in process plants. Beginning with illustrative examples detailing applications of fundamentals, the text then shows the influence of flow configuration on the performance of heat exchangers. Here the equations to calculate mean temperature difference and efficiency for stirred tank, parallel, counter-and cross flow and their combinations are derived and put together in a new and very compact way. In some cases, short computer programs are given to evaluate more complicated formulas or algorithms. Chapter 3 is comprised of seven fully worked out examples showing application of the fundamentals to thermal and hydraulic design, i.e. sizing of heat exchangers. It includes problems and worked examples and is written in a self study format. The text should be useful to practicing engineers and also graduate students in chemical and mechanical engineering.
Download or read book Thermal Science written by Erian A. Baskharone and published by McGraw Hill Professional. This book was released on 2012-01-05 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, illustrated guide to thermal science A practical, illustrated guide to thermal science Written by a subject-matter expert with many years of academic and industrial experience, Thermal Science provides detailed yet concise coverage of thermodynamics, fluid mechanics, and heat transfer. The laws of thermodynamics are discussed with emphasis on their real-world applications. This comprehensive resource clearly presents the flow-governing equations of fluid mechanics, including those of mass, linear momentum, and energy conservation. Flow behavior through turbomachinery components is also addressed. The three modes of heat transfer--conduction, convection, and radiation--are described along with practical applications of each. Thermal Science covers: Properties of pure substances and ideal gases First and second laws of thermodynamics Energy conversion by cycles Power-absorbing cycles Gas power cycles Flow-governing equations External and internal flow structures Rotating machinery fluid mechanics Variable-geometry turbomachinery stages Prandtl-Meyer flow Internal flow, friction, and pressure drop Fanno flow process for a viscous flow field Rayleigh flow Heat conduction and convection Heat exchangers Transfer by radiation Instructor material available for download from companion website
Download or read book Modern Fluid Dynamics written by Clement Kleinstreuer and published by Springer Science & Business Media. This book was released on 2010-05-21 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers essentials of traditional and modern fluid dynamics, i. e. , the fundamentals of and basic applications in fluid mechanics and convection heat transfer with brief excursions into fluid-particle dynamics and solid mechanics. Specifically, it is suggested that the book can be used to enhance the knowledge base and skill level of engineering and physics students in macro-scale fluid mechanics (see Chaps. 1–5 and 10), followed by an int- ductory excursion into micro-scale fluid dynamics (see Chaps. 6 to 9). These ten chapters are rather self-contained, i. e. , most of the material of Chaps. 1–10 (or selectively just certain chapters) could be taught in one course, based on the students’ background. Typically, serious seniors and first-year graduate students form a receptive audience (see sample syllabus). Such as target group of students would have had prerequisites in thermodynamics, fluid mechanics and solid mechanics, where Part A would be a welcomed refresher. While introductory fluid mechanics books present the material in progressive order, i. e. , employing an inductive approach from the simple to the more difficult, the present text adopts more of a deductive approach. Indeed, understanding the derivation of the basic equations and then formulating the system-specific equations with suitable boundary conditions are two key steps for proper problem solutions.
